Same great bass in less space Focal's SUB 25 KXS subwoofer combines the great features of their K2 Power Series subs with a practical shallow-mount design to deliver the solid, hard-hitting low end you expect from Focal. Precision engineering and handmade craftsmanship ensure you'll enjoy great sound. Assembled and inspected by hand Focal assembles its subs by hand in their French facilities and rigorously inspects each one for any flaws to ensure your investment performs to the highest sonic standards. Mount this 4-ohm sub in a sealed enclosure to produce bass that's highly accurate and plenty forceful, then feed it up to 350 watts RMS without fear. A powerful magnet drives the sound A neodymium magnet supplies the backbone for the sub's powerful output, driving the motor assembly with unerring precision. Focal anchors the K2 Power sub with an aluminum basket that combines rigidity and efficient heat dissipation for reduced distortion and longer speaker life. 4-layer cone delivers sonic fidelity Focal's proprietary K2 4-layer aramid fiber composite sandwich cone combines rigidity and responsiveness to deliver sonic fidelity and high power handling. A butyl rubber surround maintains control of the cone, even during deep excursion. Subwoofer Wiring Diagrams Product highlights: 10" 4-ohm shallow-mount subwoofer 4-layer K2 composite sandwich cone with butyl rubber surround aluminum basket power handling: 350 watts RMS (700 watts peak) frequency response: 25-500 Hz sensitivity: 84.5 dB top mount depth: 3.72" sealed box volume: 0.45-0.85 cu. ft. grille not included warranty: 1 year MFR # SUB25KXS Item # 091SUB25KS What's in the box: One 10" Subwoofer Focal owner's manual Quick start guide Focal window sticker Features & specs Features and Specs Size 10 -inch Impedance (Ohms) 4 Cone Material K2 Aramid Fiber Sandwich Surround Material Butyl Rubber Port diameter (inches) N/A Port length (inches) N/A Free-Air No Dual Voice Coil No Sensitivity 84.5 dB at 2.83 volts Frequency Response 25 - 500 Hz Max RMS Power Handling 350 Peak Power Handling (Watts) 700 Top Mount Depth (inches) 3 3/4 Bottom Mount Depth (inches) N/A Cutout Diameter or Length (inches) 9 1/4 Frame Width 10.55 Frame Length 10.55 Vas (liters) 18 Fs (Hz) 35 Qts 0.8 Xmax (millimeters) 0 Parts Warranty 1 Year Labor Warranty 1 Year Box Requirements Ideal Sealed Box Volume (cubic feet) N/A Minimum Sealed Box Volume (cubic feet) 0.45 Maximum Sealed Box Volume (cubic feet) 0.85 Ideal Ported Box Volume (cubic feet) N/A Minimum Ported Box Volume (cubic feet) N/A Maximum Ported Box Volume (cubic feet) N/A

About the Focal 25A4 Dream speakers Perfect sound. Discreet style. Premium construction. These are the standards that define Focal – and that make listening to Focal speakers an absolute pleasure. The Access line offers a marriage of performance and affordability, allowing you to experience the best in sound with a guilt-free conscience. Feel the bass Bass gives your music fullness and texture. If you shortchange the bass, you're not hearing your music the way it's meant to be heard. This Focal Access Series 25A4 subwoofer uses an all-weather DFS (dual fiberglass structure) cone to deliver that depth of character you may be missing from your system. The cone's butyl rubber surround helps to ensure excellent strength, durability, and musical accuracy. A unique ventilation system keeps the voice coil cool, allowing this sub to handle up to 200 watts RMS. Install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom. Highlights: 10" 4-ohm subwoofer dual fiberglass structure cone with butyl rubber surround 4-3/4" magnet promotes serious power handling spider decompression ventilated coil high SPL power handling: 50-200 watts RMS (400 watts peak) frequency response: 36-500 Hz top-mount depth: 5" sealed box volume: 0.52-0.88 cubic feet ported box volume: 0.71-1.23 cubic feet sensitivity: 85.4 dB at 2.83 volts grille not included warranty: 1 year MFR # 25A4 Item # 09125A4 What's in the box: One 10" Single voice coil woofer Manual Removable rubber mounting ring (installed) Eight 7/8" Self-tapping screws User manual (English/ French/ Russian) Focal window sticker

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. This single Focal 3KM 3-1/8" midrange driver is designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. The Focal 3KM provides faultless mid-range performance as part of your K2 Power M Series component system.   Excellence in the midrange Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make this 3-1/8" driver uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 60 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: single 3-1/2" midrange speaker 'M'-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket 4-ohm impedance handles up to 60 watts RMS (120 watts peak power) frequency response: 200-9,000 Hz sensitivity: 89 dB at 2.83 volts top-mount depth: 1-1/8" optional grille available warranty: 1 year MFR # 3KM Item # 0913KM What's in the box: Focal 3KM owner's manual One 3 KM Midrange Four 3/4" Screws Four speed clips Quick start guide Features & specs General Speaker Size 3 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition --- Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 89 Frequency Response 200 - 9k Hz Minimum RMS Wattage --- Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 1 1/8 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 2 5/8 Mounting Height (Inches) 0.176 Frame Width 3.144 Frame Length 3.144

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. The Focal 6.5KM 6-1/2" component woofers are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. This pair of Focal 6.5KM component woofers will handle the low-end detail and dynamics in your K2 Power M Series component system.     Powerful sound Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make these 6-1/2" woofers uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 120 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 6-1/2" component woofers (pair) "M"-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket neodymium magnet 4-ohm impedance handles up to 120 watts RMS (240 watts peak power) frequency response: 50-5,000 Hz sensitivity at 2.83V: 92.5 dB top-mount depth: 2-1/8" grille not included warranty: 1 year MFR # 6.5KM Item # 09165KM What's in the box: Two 6.5 KM Woofers Focal Performance owner's manual Eight 1-1/8" Screws Eight speed clips Quick start guide Features & specs General Speaker Size 6 1/2 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Aramid Fiber Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 93 Frequency Response 50 - 5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 120 Peak Power Handling (Watts) 240 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.45 Frame Width 6.494 Frame Length 6.494

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. These Focal FRAK 1-1/4" component tweeters are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. These Focal FRAK component tweeters will faithfully reproduce the high-frequency detail and dynamics as part of a K2 Power M Series component system.     Astonishing detail Focal engineers applied some of their most innovative technologies, including an M-profile aluminum/magnesium cone, to make these tweeters uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 25 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 1-1/4" tweeters aluminum 'M'-profile cone design tuned mass damper surround includes mounting brackets and grilles 4-ohm impedance handles up to 25 watts RMS (150 watts peak power) frequency response: 600-32,000 Hz sensitivity: 91 dB at 2.83 volts top-mount depth: 3/4" warranty: 1 year MFR # FRAK Item # 091FRAK Features & specs General Speaker Size 1 1/4 Design 1-way Tweeter Design M-Profile Cone Impedance (Ohms) 4 Tweeter Composition Aluminum Woofer Composition --- Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 91 Frequency Response 600 - 32k Hz Minimum RMS Wattage --- Maximum RMS Wattage 25 Peak Power Handling (Watts) 150 Top-mount Depth (Inches) 0 3/4 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 2 Mounting Height (Inches) 0.5 Frame Width 2.3 Frame Length 2.3 What's in the box: 2 Tweeters Focal owner's manual 2 Steel mounting rings Quick start guide

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

FOCAL INSIDE FORD Y-ISO HARNESST-HARNESS ADAPTER FOR AN IMPULSE AMPLIFIER Inside upgrade harness Focal's Inside system upgrades include new aftermarket vehicle-specific speakers and subs, along with their Impulse 4.320 4-channel amp. Focal also offers a variety of cables and connectors that you'll need, including: speaker wire harnesses for tweeters, subs, and center channel; T-harnesses that connect the vehicle and factory radio to the upgrade system; and extension cables to connect the T-harness to the amplifier. This T-harness provides the upgrade connections between your select Ford vehicle and a Focal Impulse 4.320 amplifier by way of the appropriate extension cable (see below). Product highlights: Ford T-harness for a Focal Inside system upgrade provides connections for an Impulse 4.320 amplifier IMP EXT ISO 5' Extension Cable accessory power and ground connections available warranty: 1 year MFR # IW FORD Y-ISO Item # 091FORYISO  Features Overview: This vehicle specific harness simplifies adding the Focal Impulse 4.320 amplifier to a compatible vehicle. The ISO extension cable (item number 091IMPEXT1, sold separately) must also be added to connect the amp. This adapter supplies the amp with a speaker level signal input, power, and ground, and connects the amp's output to the factory speaker wiring. (Power and ground for the amp are connected using the attached crimp connectors.) Please enter your vehicle information to confirm compatibility. What's in the box: Focal Inside vehicle specific adapter harness

In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3. HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units. Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.

FOCAL INSIDE NISSAN Y-ISO HARNESS HEAD UNIT ADAPTATION CABLE The Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m)  Compatibility: for Nissan vehicles since 2008

IW-IMP-EXT150 Impulse amp cable kit, facilitates quick install of Impulse amps to vehicles via ISO plugs Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.    Developed with twisted cables to effectively eliminate disturbance Three different lengths to suit all vehicles Cut-resistant protective shield Great flexibility for the easiest possible installation Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320 No soldering required Length: 5ft (1,50m)

ISO harness cable The Focal Inside VOLKSWAGEN Y-ISO HARNESS car radio adapter cable is designed for the IMPULSE 4.320 four-channel digital amplifier. It allows connection to the original Volkswagen car radio and quick and easy connection of Focal Inside extension cables. Designed specifically for Volkswagen vehicles after 2005, this one-meter-long cable allows easy Plug & Play installation. Connection to the extension cable is via ISO connectors; no soldering is required.

Designed and developed in France, the Sub 12 Slim benefits from Focal’s sound savoir-faire. With its 12” (30cm) polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system. It has a single voice coil architecture for simplicity and efficacy. With a very shallow depth, this product is easily installed into restricted spaces such as the sides of a car boot. Key points• Shallow depth; easy to install• A deep and powerful bass• Efficacy as sealed box, from 15L• Robust design; steel chassis• Excellent power handling

In addition to its 400-watt power and its Flax cone for a natural sound, one of the highlights of the P 20 FSE subwoofer is its unique slim design, making it light and even easier to install in your vehicle. Its built-in motor adds to its compactness, without compromising on the power delivered. Its robust shaped rubber surround allows impressive articulation, synonymous with extended frequency response and deep bass reproduction. Finally, the 1 1/2″ (38mm) coil on glass fibre stand reduces overheating to guarantee perfectly adapted ventilation. P 20 FSE is the ideal compromise for a very compact sealed-box use (6 to 9L). P20FSE Features Unique, patented Flax cone “Dual Magnet” motor Made in France in the Focal workshops Slim design, even easier integration Power and precision

Step up to Slatefiber You can always count on Focal's dedication to innovation. From beryllium to flax, their research and development team search far and wide in the hunt for exceptional speaker materials. With Focal PC 165 SF 6-1/2" 2-way car speakers they've brought Slatefiber into the fold. You can also find Slatefiber cones in high-performance home speakers like their floor-standing Chora Series. Made from non-woven, recycled carbon fibers and manufactured in France, the lightweight Slatefiber cone offers exceptional rigidity and damping qualities to provide a dynamic yet balanced sound, especially in the midrange. Focal employs their famous inverted dome tweeter to distribute high frequencies in a wide pattern for the most natural soundstage possible. Serious power-handling If you want to make the most of Focal's groundbreaking design, we suggest powering them with up to 80 watts RMS of aftermarket power. Because of their impressive sensitivity, these speakers will do quite well with factory power too. And they look cool The aluminum basket is reinforced with a streamlined "rotor" design that not only looks cool, but provides a non-resonant platform for the speaker's superior components. Plus, the unique blue color of the woofer cone is unlike any car speaker we've seen before. Product highlights: 6-1/2" 2-way car speakers (pair) Slatefiber woofer cone aluminum/magnesium inverted dome tweeter 4-ohm impedance handles up to 80 watts RMS (160 watts peak) frequency response: 60-21,000 Hz sensitivity: 91 dB at 2.83 volts mounting depth: 2-13/16" warranty: 1 year MFR # PC 165 SF Item # 091PC165SF What's in the box: Two 2-way speakers 2 Grilles 2 Grille mounting rings Grille putty 2 Foam woofer gaskets 8 Speed clips Eight 1" Pan head screws Owner's manual (English/ French) Focal window sticker

Focal’s Performance Series subwoofers deliver pure bass power so your music always hits strong and true. This Performance 10″ sub features a light, tough poly cone and a self-regulating cooling system, so it’ll perform reliably. A butyl rubber surround adds to the sub’s strength, durability, and accuracy. SUB P25DB Description With heavy ferrite magnets and 4-layer voice coils, it’s no surprise this sub handles plenty of power — up to 250 watts RMS. The good sensitivity rating means your amp won’t have to work so hard to drive this sub, so you’ll get maximum wallop per watt. The dual 4-ohm voice coils allow you to wire the sub for either 2-ohm or 8-ohm impedance, and you’ll appreciate that versatility as your system grows and changes. You can install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom. SUB P25DB Technical specifications 10″ subwoofer with dual 4-ohm voice coils polypropylene cone with butyl rubber surround power range: 50-250 watts RMS peak power handling: 500 watts frequency response: 42-500 Hz sensitivity: 90.9 dB top-mount depth: 5-7/16″ sealed box volume: 0.88-1.59 cubic feet ported box volume: 1.24-2.82 cubic feet

The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring. Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility 

The Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the original wiring. Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility

Focal IW BMW IMP 2.1 BMW/IMPULSE 4.320 Car Harness   The BMW 2.1 IMP HARNESS connection cables are designed for connecting BMW speaker drivers and theIMPULSE 4.320 compact 4-channel digital amplifier.The specific BMW connectors make installation simple. This cable enables amplification of a vehicle's front speakers across 2 channels, and amplification of two BMW subwoofers over the other two channels of the IMPULSE 4.320 amplifier.

The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables. * Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer. Additional Information Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 3.28ft (1 m)