Americas Garage Pro 5R & Pro 10R Air Filter Restore...
$65.00
aFe POWER Air Filter Restore Kit is a one box solution to service your aFe POWER cotton gauze air filter. Proprietary ingredients used in the oil are void of contaminants that could damage sensitive vehicle electronics; the special formulation for the cleaner breaks down oil, dirt and dust while not harming the cotton gauze. aFe POWER cotton gauze filters are washable and reuseable, proper maintenance is key to a long service life. After cleaning, make sure to re-oil your filter; using a cotton gauze filter without oil will severly impact its' ability to protect your engine.
For Pro 5R and Pro 10R Air Filters:
This Restore Kit was specifically developed for aFe POWER's Pro 5R and Pro 10R air filters. The POWER CLEANER effectively breaks down dirt and dust without damaging the media, while the oil captures debris during use.
Restoring Air Filters:
Simply apply the cleaner onto the filter element, let it soak, and rinse. Once dry, the oil can be applied. Take care to not over-oil the filter. Refer to the instruction sheet for more information.
Features & Benefits
Specifically made for aFe POWER oiled Pro 5R and Pro 10R Air Filters
Oil Captures Dirt and Dust. Cleaner breaks down oil, dirt and dust without damaging filter media
Recommended use every 20k-30k miles with cleaning
Complete air filter restoration solution
5.50oz Aerosol & 12oz Spray
InstallationInstallationInstall Guide 1
Americas Garage Rear Fox Performance Elite Series 2.5" Remote Reservoir...
$3,700.00
Specifications
SERIES: Performance Elite
TRAVEL: 9.18
REAR LIFT HEIGHT: 0-1.5
EXTENDED LENGTH: 25.48
COMPRESSED LENGTH: 15.35
TOP MOUNT: Stem Top
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Rear Fox Performance Elite Series 2.5" Remote Reservoir...
$3,490.00
Specifications
SERIES: Performance Elite
TRAVEL: 13.58
REAR LIFT HEIGHT: 4-6
BODY: 2.5" impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
BODY PLATING: Hard-anodized for a durable finish
COMPONENTS: Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT: 7/8" hard chrome plated heat-treated alloy steel
PISTON: Race-developed high-flow piston design
VALVING: Application specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
BEARINGS: PTFE-lined, heat-treated, alloy steel spherical
EXTENDED LENGTH: 34.93
COMPRESSED LENGTH: 21.35
TOP MOUNT: Eyelet
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Durable Zinc Plated Seamless Alloy Body
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Rear Fox Factory Race Series 3.0" Internal Bypass...
$5,990.00
Specifications
TRAVEL: 9.97
EXTENDED LENGTH: 26.25
COMPRESSED LENGTH: 16.28
TOP MOUNT: Stem Top
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Important Notes
Rear Lift : 1 - 2 inches
Requires extended brake lines
Americas Garage Rear Fox Performance Elite Series 2.5" Remote Reservoir...
$3,925.00
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over timeHard-anodized for a durable finishBlack-anodized, CNC-machined 6061-T6 billet aluminum7/8-inch hard chrome-plated steel
Americas Garage Rear Fox Performance Elite Series 2.5" Piggy Back...
$3,490.00
Specifications
SERIES: Performance Elite
TRAVEL: 10.98
REAR LIFT HEIGHT: 0-2
EXTENDED LENGTH: 28.37
COMPRESSED LENGTH: 17.4
TOP MOUNT: Eyelet
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Rear Fox Performance Elite Series 2.5" Remote Reservoir...
$3,490.00
Specifications
SERIES: Performance Elite
TRAVEL: 12.48
REAR LIFT HEIGHT: 2-3.5
BODY: 2.5" impact extruded and CNC machined 6061-T6 Type III anodized aluminum body
RESERVOIR: 2.5" smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster
SHAFT: 7/8" hard chrome plated steel shafts
PISTON: Larger, high flow piston increases bottom-out resistance and damping in any environment
VALVING: Vehicle-specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
EXTENDED LENGTH: 32.33
COMPRESSED LENGTH: 19.85
TOP MOUNT: Eyelet
BOTTOM MOUNT: Eyelet
Features & Benefits
2.5" impact-extruded and CNC-machined 6061-T6 Type III anodized aluminum body
7/8" hard chrome-plated steel shafts
Redundant sealing pack system
2.5" smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster
Unlock all travel available in jounce and droop positions
Maximize comfort and control through any terrain
Remote reservoirs are mounted to clear aggressive tires at full lock
Aluminum shock bodies and external reservoirs efficiently dissipate heat by increasing oil capacity
Larger, high flow piston increases bottom-out resistance and damping in any environment
Americas Garage Rear Fox Performance Elite Series 2.5" Shock, Suits...
$3,490.00
Designed for enhanced stability and control
Optimized for 0-1.5 inch lift
Durable construction for long-lasting performance
Easy installation for quick upgrades
Improves ride quality on and off-road
Ideal for Ford Super Duty models
Specifications
SERIES: Performance Elite
TRAVEL: 11.48
REAR LIFT HEIGHT: 0-1.5
BODY: 2.5" impact extruded and CNC machined 6061-T6 Type III anodized aluminum body
RESERVOIR: 2.5" smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster
SHAFT: 7/8" hard chrome plated steel shafts
PISTON: Larger, high flow piston increases bottom-out resistance and damping in any environment
VALVING: Vehicle-specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
EXTENDED LENGTH: 29.83
COMPRESSED LENGTH: 18.35
TOP MOUNT: Eyelet
BOTTOM MOUNT: Eyelet
Features & Benefits
2.5" impact-extruded and CNC-machined 6061-T6 Type III anodized aluminum body
7/8" hard chrome-plated steel shafts
Redundant sealing pack system
2.5" smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster
Unlock all travel available in jounce and droop positions
Maximize comfort and control through any terrain
Remote reservoirs are mounted to clear aggressive tires at full lock
Aluminum shock bodies and external reservoirs efficiently dissipate heat by increasing oil capacity
Larger, high flow piston increases bottom-out resistance and damping in any environment
Americas Garage Front Fox Performance Elite Series 2.5" Remote Reservoir...
$3,490.00
Features & Benefits
Durable 2.5" hard anodized aluminum body resists rust over time.
Americas Garage Front Fox Performance Elite Shocks 2.5" Remote Reservoir...
$3,490.00
Specifications
SERIES: Performance Elite
TRAVEL: 7.48
FRONT LIFT HEIGHT: 0-1.5
BODY: 2.5" impact extruded and CNC machined 6061-T6 Type III anodized aluminum body
RESERVOIR: 2.5" smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster
SHAFT: 7/8" hard chrome plated steel shafts
PISTON: Larger, high flow piston increases bottom-out resistance and damping in any environment
VALVING: Vehicle-specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
EXTENDED LENGTH: 22.29
COMPRESSED LENGTH: 14.81
TOP MOUNT: Stem Top
BOTTOM MOUNT: Eyelet
Features & Benefits
2.5" impact-extruded and CNC-machined 6061-T6 Type III anodized aluminum body
7/8" hard chrome-plated steel shafts
Redundant sealing pack system
2.5" smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster
Unlock all travel available in jounce and droop positions
Maximize comfort and control through any terrain
Remote reservoirs are mounted to clear aggressive tires at full lock
Aluminum shock bodies and external reservoirs efficiently dissipate heat by increasing oil capacity
Larger, high flow piston increases bottom-out resistance and damping in any environment
Americas Garage Rear Fox Performance Elite Series 2.5" Piggyback Remote...
$3,490.00
Specifications
Adjustable Damping: No
Adjustable: No
Gas Charged: No
Mounting Hardware Included: No
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over timeHard-anodized for a durable finishBlack-anodized, CNC-machined 6061-T6 billet aluminum7/8-inch hard chrome-plated steel
Americas Garage Rear Fox Performance Elite Series 2.5" Remote Reservoir...
$3,490.00
Specifications
Adjustable: Yes
Compressed Length: 17.4100
Cylinder Diameter: 2_5
Cylinder Material: Aluminum
Extended Length: 27.8800
Gas Charged: No
Lower Mount Type: Eyelet
Pvg Product Status: Active
Reservoir Type: Remote
Shaft Diameter: 7_8
Shaft Material: Chrome Plated Steel
Shocks Included: No
Travel Length: 10.4700
Type: Smooth Body
Upper Mount Code: Eyelet
Upper Mount Type: Eyelet
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over time
Hard-anodized for a durable finish
Black-anodized, CNC-machined 6061-T6 billet aluminum
Application-specific, adjustable 3.0 Eibach® racing springs
7/8-inch hard chrome-plated steel shafts
Application specific valving to maximize performance
Americas Garage Rear Fox Performance Elite Series 2.5" Piggyback Remote...
$3,490.00
Features & Benefits
Performance Tuned For Vehicle Specific Application; Durable Zinc Plated Seamless Alloy Body; External Reservoir System Dissipates Heat Fast; Black Anodized CNC Machined Aluminum Components
Americas Garage Front Fox Performance Elite Series 2.5" Remote Reservoir...
$3,890.00
Specifications
Adjustable Damping: No
Adjustable: No
Gas Charged: No
Mounting Hardware Included: No
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over time
Hard-anodized for a durable finish
Black-anodized CNC-machined 6061-T6 billet aluminum
7/8-inch hard chrome-plated steel shafts
Application specific valving to maximize performance
Americas Garage Rear Fox Factory Series 2.5" Piggyback Remote Reservoir...
$6,785.00
Factory Race Series 2.5 Reservoir smooth body shocks give you enhanced ride quality and the control you need when heading off the pavement. They take their design from our Off-Road race shocks, so they've been thoroughly perfected in brutal conditions that you will probably never see. Our athletes push the boundaries in competition to develop race-proven performance you can bolt onto your Truck or SUV.
External reservoir allows for increase oil and nitrogen capacity while delivering striking race look. Applications are available to fit most stock and lifted Trucks and SUVs. Our complete line of bolt-on, Factory Series shocks provide improved damping in any terrain. Experience for yourself the incredible performance and precise control that Factory Race Series 2.5 Reservoir shocks deliver.
Similar/Previous: ,FOX88326042
Performance tuned for specific applications
Durable zinc plated seamless alloy body
External reservoir system dissipates heat fast
Black anodized CNC machined aluminum components
Improved ride quality and control
Bolt-on installation for easy upgrade
Specifications
PART NUMBER: 883-26-042
SERIES: Factory Race
TRAVEL: 13.56
REAR LIFT HEIGHT: 4-6
BODY: 2.5" smooth bore zinc plated seamless steel body
BODY PLATING: Zinc-plated and double-clear coated for long lasting finish
COMPONENTS: Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT: 7/8" hard chrome plated heat-treated alloy steel
PISTON: Race-developed high-flow piston design
VALVING: Application specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
BEARINGS: PTFE-lined, heat-treated, alloy steel spherical
EXTENDED LENGTH: 35.01
COMPRESSED LENGTH: 21.45
TOP MOUNT: EB2
BOTTOM MOUNT: ES13
Features & Benefits
Performance Tuned For Vehicle Specific Application
Durable Zinc Plated Seamless Alloy Body
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Rear Fox Factory Race Series 2.5" Remote Reservoir...
$3,500.00
Specifications
SERIES: Factory Race
TRAVEL: 11.37
REAR LIFT HEIGHT: 0-1.5
BODY: 2.5" smooth bore zinc plated seamless steel body
BODY PLATING: Zinc-plated and double-clear coated for long lasting finish
COMPONENTS: Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT: 7/8" hard chrome plated heat-treated alloy steel
PISTON: Race-developed high-flow piston design
VALVING: Application specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
BEARINGS: PTFE-lined, heat-treated, alloy steel spherical
EXTENDED LENGTH: 29.83
COMPRESSED LENGTH: 18.46
TOP MOUNT: Eyelet
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Durable Zinc Plated Seamless Alloy Body
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Front Fox Factory Race Series 2.5" Remote Reservoir...
$3,900.00
Factory Race Series 2.5 Reservoir smooth body shocks give you enhanced ride quality and the control you need when heading off the pavement. They take their design from our Off-Road race shocks, so they've been thoroughly perfected in brutal conditions that you will probably never see. Our athletes push the boundaries in competition to develop race-proven performance you can bolt onto your Truck or SUV.
External reservoir allows for increase oil and nitrogen capacity while delivering striking race look. Applications are available to fit most stock and lifted Trucks and SUVs. Our complete line of bolt-on, Factory Series shocks provide improved damping in any terrain. Experience for yourself the incredible performance and precise control that Factory Race Series 2.5 Reservoir shocks deliver.
Similar/Previous: ,FOX88326013
Enhanced ride quality and control
Race-proven performance for off-road
Improved damping for any terrain
Striking design with external reservoir
Increased oil and nitrogen capacity
Bolt-on installation for easy upgrade
Specifications
SERIES: Factory Race
TRAVEL: 9.97
FRONT LIFT HEIGHT: 4-6
BODY: 2.5" smooth bore zinc plated seamless steel body
BODY PLATING: Zinc-plated and double-clear coated for long lasting finish
COMPONENTS: Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT: 7/8" hard chrome plated heat-treated alloy steel
PISTON: Race-developed high-flow piston design
VALVING: Application specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
BEARINGS: PTFE-lined, heat-treated, alloy steel spherical
EXTENDED LENGTH: 26.37
COMPRESSED LENGTH: 16.4
TOP MOUNT: Stem Top
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Durable Zinc Plated Seamless Alloy Body
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Rear Factory Race Series 2.5" Remote Reservoir DSC...
$3,800.00
Specifications
SERIES: Factory Race
TRAVEL: 13.57
REAR LIFT HEIGHT: 4-6
BODY: 2.5" smooth bore zinc plated seamless steel body
BODY PLATING: Zinc-plated and double-clear coated for long lasting finish
COMPONENTS: Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT: 7/8" hard chrome plated heat-treated alloy steel
PISTON: Race-developed high-flow piston design
VALVING: Application specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
BEARINGS: PTFE-lined, heat-treated, alloy steel spherical
EXTENDED LENGTH: 35.03
COMPRESSED LENGTH: 21.46
TOP MOUNT: Eyelet
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Durable Zinc Plated Seamless Alloy Body
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Americas Garage Front Fox Performance Elite Series 2.5" Coilover Remote...
$4,490.00
Specifications
SERIES: Performance Elite
TRAVEL: 5.58
FRONT LIFT HEIGHT: 2
EXTENDED LENGTH: 23.32
COMPRESSED LENGTH: 16.94
TOP MOUNT: OEM
BOTTOM MOUNT: Bar Pin
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Important Notes
Zero lift on Tremor
Americas Garage Front Fox Factory Race Series 3.0 Internal Bypass...
$7,500.00
Specifications
TRAVEL: 5.37
EXTENDED LENGTH: 21.6
COMPRESSED LENGTH: 15.65
TOP MOUNT: OEM
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Important Notes
Front Lift : 2-2.25 inches
Requires Upper Control Arm
Extended CV Axles are required for non-TRD Off-Road/PRO Trims (TRD Off-Road/PRO red axle or 3” TRD Lift Kit silver axle)
Americas Garage Front Fox Performance Elite Series 2.5" Coilover Remote...
$4,490.00
Specifications
Adjustable: No
Gas Charged: No
Shocks Included: No
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over timeHard-anodized for a durable finishBlack-anodized, CNC-machined 6061-T6 billet aluminumApplication-specific, adjustable
Americas Garage Front Fox Performance Elite Series 2.5" Coilover Remote...
$4,490.00
Specifications
SERIES: Performance Elite
TRAVEL: 5.49
FRONT LIFT HEIGHT: 2
BODY: 2.5" Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
BODY PLATING: Hard-anodized for a durable finish
COMPONENTS: Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT: 7/8" hard chrome plated steel shafts
PISTON: 6061-T6 hard-anodized, high flow aluminum piston
VALVING: Application specific valving to maximize performance
SEALS: Redundant sealing pack system main seal, wiper seal, scraper seal
BEARINGS: PTFE-lined, heat-treated, alloy steel spherical
EXTENDED LENGTH: 22.32
COMPRESSED LENGTH: 16.83
TOP MOUNT: TM
BOTTOM MOUNT: Clevis
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Important Notes
Does Not Fit Air Ride Models
Americas Garage Front Fox Performance Elite Series 2.5" Coilover Remote...
$4,490.00
Engineered for exceptional ride quality and handling
Remote reservoir design for improved heat dissipation
Adjustable damping for personalized performance
Durable construction for long-lasting reliability
Easy installation for a hassle-free upgrade
Perfect for off-road enthusiasts seeking enhanced control
Specifications
Adjustable: Yes
Compressed Length: 16.9400
Cylinder Diameter: 2_5
Cylinder Material: Steel
Extended Length: 22.1600
Gas Charged: Yes
Lower Mount Type: Bar Pin
Pvg Product Status: Active
Reservoir Type: Remote
Shaft Diameter: 7_8
Shaft Material: Chrome Plated Steel
Shocks Included: No
Travel Length: 5.2200
Type: Coil Over
Upper Mount Code: Oem
Upper Mount Type: Oem
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over time
Hard-anodized for a durable finish
Black-anodized, CNC-machined 6061-T6 billet aluminum
Application-specific, adjustable 3.0 Eibach® racing springs
7/8-inch hard chrome-plated steel shafts
Application specific valving to maximize performance
Americas Garage Front Fox Performance Elite 2.5" Remote Reservoir DSC...
$5,830.00
Specifications
SERIES: Performance Elite
TRAVEL: 7.18
EXTENDED LENGTH: 24.89
COMPRESSED LENGTH: 17.64
TOP MOUNT: OEM
BOTTOM MOUNT: Eyelet
Features & Benefits
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
External Reservoir System Dissipates Heat Fast
Black Anodized CNC Machined Aluminum Components
Important Notes
Requires Upper Control Arm
Americas Garage Kit: 07-18 Jeep JK Rear, Gen2, Bump Stop...
$1,699.00
Inspired by it's off-road racing predecessors, the new Factory Race Series bump stop combines race proven technology with new, cutting-edge features to provide increased damping performance and bottom out control in the last few inches of suspension travel.
The threaded body allows you to adjust the mounting height to fine-tune when the bump stop engages during up travel, preventing harsh bottom outs. An Internal Floating Piston (IFP) in the shaft separates the oil and nitrogen to prevent cavitation and bucking while the negative coil spring softens initial impacts and harsh top outs. The integrated FOX AIR VALVE (FAV) is located at the bottom of the shaft for easy access and is protected by the replaceable strike pad.
Factory Series bump stops allow you to use every inch of suspension travel without harsh bottoming.
Similar/Previous: ,FOX88302155
Specifications
SERIES: Factory Race
TRAVEL: 1.85
REAR LIFT HEIGHT: ALL
BODY: Threaded, impact extruded, black anodized, CNC machined 6061-T6 billet aluminum
COMPONENTS: Black anodized, CNC machined 6061-T6 billet aluminum
SHAFT: Hard chrome plated 1-1/4" 4130 steel with Internal Floating Piston (IFP) for increased damping performance
PISTON: Heavy-duty powdered steel
VALVING: Tunable, velocity sensitive deburred valve shims
SEALS: Redundant sealing pack system, main seal, wiper seal, scraper seal
EXTENDED LENGTH: 10.04
COMPRESSED LENGTH: 8.18
TOP MOUNT: Threaded Body
BOTTOM MOUNT: None
Features & Benefits
Modifications Required
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel
IFP Separates Oil From High-Pressure Nitrogen Gas
Black Anodized CNC Machined Aluminum Components
Americas Garage Front Fox Performance Elite Series 2.5" Coilover Remote...
$4,490.00
Specifications
Adjustable: Yes
Compressed Length: 16.9400
Cylinder Diameter: 2_5
Cylinder Material: Steel
Extended Length: 22.8100
Gas Charged: Yes
Lower Mount Type: Bar Pin
Pvg Product Status: Active
Reservoir Type: Remote
Shaft Diameter: 7_8
Shaft Material: Chrome Plated Steel
Shocks Included: No
Travel Length: 5.8700
Type: Coil Over
Upper Mount Code: Oem
Upper Mount Type: Oem
Features & Benefits
2.5-inch Impact extruded and CNC machined 6061-T6 aluminum body resists rust over time
Hard-anodized for a durable finish
Black-anodized, CNC-machined 6061-T6 billet aluminum
Application-specific, adjustable 3.0 Eibach® racing springs
7/8-inch hard chrome-plated steel shafts
Application specific valving to maximize performance
Requires upper control arm.
Americas Garage PowerStep XL Electric Running Boards suits Ram 2500/3500...
$3,990.00
AMP Research is the leading provider of power-retractable running boards, making waves with its original PowerStep. While providing sufficient assistance for most individuals, AMP Research offers this beefier, lower-hanging iteration, the PowerStep XL! This heavy-duty PowerStep retains the same general design as AMP’s conventional retractable running boards with a few improvements geared toward oversized and heavily lifted applications. The upgrades include a rugged housing that the boards retract into, providing a more robust appearance for lifted rigs, as well as boards that drop an additional 4 inches lower than other PowerStep models, making it easier to get in and out of your ride! Like all other PowerStep variants, the XL is manufactured entirely from durable die-cast aluminum, ensuring maximum strength and minimum weight. All aluminum components are anodized and coated with a military-grade PTFE (Teflon), preventing surface corrosion. Due to the 6" wide PowerStep XL’s rugged alloy construction, these steps can withstand a whopping 600 pounds, far heavier than traditional side steps! For added convenience, these steps feature bright LED chips integrated into the central rail, casting a vibrant glow onto the step surface and surrounding area to ensure sure-footed entry, no matter the time of day. For the ultimate blend of styling and convenience for your lifted pickup, check out the AMP Research PowerStep XL. AMP Research is a RealTruck company, so when you order a pair of PowerStep XL running boards from us, you’re ordering directly from the manufacturer. Like all PowerStep products, the PowerStep XL is backed with an industry-leading 5-year limited warranty.
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Corrosion-resistant cast aluminum construction
Textured, slip-resistant step surface
Integrated LED lighting for safe entry
5-year limited warranty included
Specifications
Step Length: Cab Length
Step Type: Single-Motor Retracting Step
Step Finish: Textured Black Powder Coat
Step Material: Aluminum
Step Mount: Mounts to Rocker Panel
Warranty: 5 Year Limited Warranty
Step Width: 6 Inch
Features & Benefits
aLowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant cast aluminum construction
Anodized, then finished with a military-grade PTFE coating
6-inch wide, cab-length step area
Textured, slip-resistant step surface
Integrated LED lighting illuminated steps for safe entry
Optional Override Switch is available for manual control
Includes vehicle-specific installation guide, mount kit, and hardware
Mounts to vehicle’s rocker panel
Connects to OBDII port using patented Plug-N-Play module
5-year limited warranty
Americas Garage PowerStep XL Electric Running Boards suits Chev 1500...
$3,990.00
AMP Research is the leading provider of power-retractable running boards, making waves with its original PowerStep™. While providing sufficient assistance for most individuals, AMP Research offers this beefier, lower-hanging iteration, the PowerStep™ XL!
This heavy-duty PowerStep™ retains the same general design as AMP’s conventional retractable running boards with a few improvements geared toward oversized and heavily lifted applications. The upgrades include a rugged housing that the boards retract into, providing a more robust appearance for lifted rigs, as well as boards that drop an additional 4 inches lower than other PowerStep™ models, making it easier to get in and out of your ride!
Like all other PowerStep™ variants, the XL is manufactured entirely from durable die-cast aluminum, ensuring maximum strength and minimum weight. All aluminum components are anodized and coated with a military-grade PTFE (Teflon), preventing surface corrosion. Due to the 6" wide PowerStep™ XL’s rugged alloy construction, these steps can withstand a whopping 600 pounds, far heavier than traditional side steps!
For added convenience, these steps feature bright LED chips integrated into the central rail, casting a vibrant glow onto the step surface and surrounding area to ensure sure-footed entry, no matter the time of day. For the ultimate blend of styling and convenience for your lifted pickup, check out the AMP Research PowerStep™ XL.
AMP Research is a RealTruck® company, so when you order a pair of PowerStep™ XL running boards from us, you’re ordering directly from the manufacturer. Like all PowerStep™ products, the PowerStep™ XL is backed with an industry-leading 5-year limited warranty.
Lowest deployed power-retractable running boards
XL boards extend 4 inches lower for easier access
Corrosion-resistant cast aluminum construction
Integrated LED lighting for safe entry
Textured slip-resistant step surface
5-year limited warranty for peace of mind
Specifications
Step Length: Cab Length
Step Type: Single-Motor Retracting Step
Step Finish: Textured Black Powder Coat
Step Material: Aluminum
Step Mount: Mounts to Rocker Panel
Warranty: 5 Year Limited Warranty
Step Width: 6 Inch
Features & Benefits
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant cast aluminum construction
Anodized, then finished with a military-grade PTFE coating
6-inch wide, cab-length step area
Textured, slip-resistant step surface
Integrated LED lighting illuminated steps for safe entry
Optional Override Switch is available for manual control
Includes vehicle-specific installation guide, mount kit, and hardware
Mounts to vehicle’s rocker panel
Connects to OBDII port using patented Plug-N-Play module
5-year limited warranty
InstallationInstallationInstall Guide 1
Americas Garage LOGIQ Air Spring Kit, Set of 2 suits...
$1,366.00
Unlock your GM's fullest potential with a LOGIQ Air Spring Kit. The leaf assist Air Spring Kit is proven amongst the hardest working trucks to not only improve load support, but drastically increase in-cab comfort when towing and hauling heavy loads. This kit is simple to install as it mounts between the frame rail and leaf pack of your vehicle. If your truck has factory overload springs, The LOGIQ Air Spring Kit will replace them and increase your loaded ride comfort even more while also improving upon lifting capacity and load support. Our Air Spring Kits come pre-assembled, meaning no drilling, no welding an no guesswork is needed to improve your ride immediately.
While most factory and aftermarket solutions compensate for heavy loads by solely increasing spring rate or adding more leaf packs, LOGIQ solves load leveling by using dual rolling sleeve air springs that are tuned to match the ride frequency of the front suspension, making for the smoothest ride possible in these trucks.
WARNING - Never exceed manufacturer's Maximum Payload or GVWR
Similar/Previous: ,LOG88-33200
Optimized ride quality for smooth performance even while towing and hauling
Enhanced stability and support with up to 7200 lbs of load capacity
Compatible with a variety of OEM and aftermarket hitches
Precision fitment ensures proper installation and operation
Comes with a limited lifetime warranty for peace of mind
Includes a free 5-year 60000 mile powertrain warranty
Specifications
Air Spring Location: Leaf Spring Mounted Outboard Frame Rails
Air Spring Quantity: 4
Load Capacity: 6,400 lbs @ 150 psi
Maximum Pressure: 150 psi
Minimum Pressure: 5 psi
Features & Benefits
Optimized Ride Quality: OE-style LOGIQ air springs feature a low frequency design for smooth performance, even while towing and hauling.
Enhanced Stability & Support: LOGIQ high-endurance air springs provide up to 7,200 lbs of load support (dual spring models).
OEM Hitch Integration: Compatible with a wide variety of OEM and aftermarket 5th wheel hitches.
Precision Fitment: Built-in features that locate off the factory frame and leaf springs guarantees proper fitment and operation for every install.
Lifetime Warranty: Air Spring Kits come with a Limited Lifetime Warranty and FREE ReadyGUARD 5-year - 60,000 mile Powertrain Warranty.
InstallationInstallation
Install Guide 1
Install Guide 2
Important Notes
Fits trucks with or without factory overload springs.
Does not fit cab & chassis models.
Not compatible with most aftermarket leaf springs.
Not compatible with aftermarket fuel tanks.
Dual Rear Wheel (Dually) trucks require a DRW Hardware Kit - PN: 88-33XXX-DRW
On Dual Rear Wheel applications, only works with factory wheel and tire specifications or with a wheel spacer.
If vehicle is lifted 1-3" in the rear, add bumpstop spacer kit 88-32200-3.
To install this kit you must have at least 1.83" of clearance between the tire sidewall and the leaf spring.
Americas Garage Revolver X4TS Hard Roll Up Tonneau Cover, suits...
$1,999.00
The BAK Revolver X4Ts is a hard roll up tonneau cover designed to protect your ute’s tub while allowing flexible cargo access and the ability to mount compatible racks and accessories. It combines a solid construction with integrated T slot rails so accessories can be mounted directly to the cover’s side rails.
Constructed from heavy duty aluminium slats with a marine grade vinyl overlay and finished in matte black, the X4Ts sits low and flat on the tub when closed. The T slot rails along the top edges of the cover let you add over tub mounts for gear, carriers, and rack systems without blocking the operation of the cover itself.
To operate the cover, you release the rear latches and roll the cover forward toward the cab. The cover rolls smoothly along the side rails and can be secured in the forward position to provide full access to the tub without removing the cover. When you’re ready to close it, you unhook the securing strap, unroll the cover back toward the tailgate, and the patented rotational locking system engages to secure the cover in place.
Weather seals run around the full perimeter of the cover and the locking rails provide basic cargo security when the cover is closed. The system installs with a no drill, clamp on process using ute-specific hardware.
Similar/Previous: ,BAK80213RB
Durable hard roll up design for maximum protection
Easy installation with no drilling required
Sleek low-profile appearance enhances truck aesthetics
Weather-resistant materials keep cargo safe and dry
Secure locking mechanism for added security
Compatible with RamBox for versatile storage solutions
Specifications
Material: Aluminium slats with durable vinyl overlay
Finish: Matte black
Installation: No-drill clamp system
Compatibility: Available for various Ute models with T-slot accessory compatibility.
Warranty: 5 year warranty.
Features & Benefits
Heavy-Duty Build: Aluminium slat construction designed for strength and durability in harsh conditions.
Integrated T-Slot Rails: Easily mount bars/racks and cargo accessories for added carrying capacity.
Matte Black Finish: Durable vinyl overlay protects against UV exposure and daily wear.
Enhanced Security: Locks securely with the tailgate to keep your cargo safe.
Full Tub Access: Roll-up design provides complete tub access without obstructing visibility.
Easy Installation: No-drill clamp system for fast and simple installation.
InstallationInstallation
Install Guide 1
Estimated time: 2 hours
Difficulty: Easy
Install Tools
9/16” wrench or socket
1/2" wrench or socket
Torque wrench
Important Notes
Suits RAM 2500 with RamBox
Americas Garage PowerStep XL Electric Running Boards, suits Ram 2500/3500...
$3,999.00
AMP Research is the leading provider of power-retractable running boards, making waves with its original PowerStep. While providing sufficient assistance for most individuals, AMP Research offers this beefier, lower-hanging iteration, the PowerStep XL! This heavy-duty PowerStep retains the same general design as AMP’s conventional retractable running boards with a few improvements geared toward oversized and heavily lifted applications. The upgrades include a rugged housing that the boards retract into, providing a more robust appearance for lifted rigs, as well as boards that drop an additional 4 inches lower than other PowerStep models, making it easier to get in and out of your ride! Like all other PowerStep variants, the XL is manufactured entirely from durable die-cast aluminum, ensuring maximum strength and minimum weight. All aluminum components are anodized and coated with a military-grade PTFE (Teflon), preventing surface corrosion. Due to the 6" wide PowerStep XL’s rugged alloy construction, these steps can withstand a whopping 600 pounds, far heavier than traditional side steps! For added convenience, these steps feature bright LED chips integrated into the central rail, casting a vibrant glow onto the step surface and surrounding area to ensure sure-footed entry, no matter the time of day. For the ultimate blend of styling and convenience for your lifted pickup, check out the AMP Research PowerStep XL. AMP Research is a RealTruck company, so when you order a pair of PowerStep XL running boards from us, you’re ordering directly from the manufacturer. Like all PowerStep products, the PowerStep XL is backed with an industry-leading 5-year limited warranty.
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Corrosion-resistant cast aluminum construction
Textured, slip-resistant step surface
Integrated LED lighting illuminated steps for safe entry
5-year limited warranty
Specifications
Step Length: Cab Length
Step Type: Single-Motor Retracting Step
Step Finish: Textured Black Powder Coat
Step Material: Aluminum
Step Mount: Mounts to Rocker Panel
Warranty: 5 Year Limited Warranty
Step Width: 6 Inch
Features & Benefits
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant cast aluminum construction
Anodized, then finished with a military-grade PTFE coating
6-inch wide, cab-length step area
Textured, slip-resistant step surface
Integrated LED lighting illuminated steps for safe entry
Optional Override Switch is available for manual control
Includes vehicle-specific installation guide, mount kit, and hardware
Mounts to vehicle’s rocker panel
Connects to OBDII port using patented Plug-N-Play module
5-year limited warranty
InstallationInstallationInstall Guide 1
Americas Garage PowerStep XL Electric Running Boards by AMP Research...
$3,990.00
AMP Research is the leading provider of power-retractable running boards, making waves with its original PowerStep™. While providing sufficient assistance for most individuals, AMP Research offers this beefier, lower-hanging iteration, the PowerStep™ XL!
This heavy-duty PowerStep™ retains the same general design as AMP’s conventional retractable running boards with a few improvements geared toward oversized and heavily lifted applications. The upgrades include a rugged housing that the boards retract into, providing a more robust appearance for lifted rigs, as well as boards that drop an additional 4 inches lower than other PowerStep™ models, making it easier to get in and out of your ride!
Like all other PowerStep™ variants, the XL is manufactured entirely from durable die-cast aluminum, ensuring maximum strength and minimum weight. All aluminum components are anodized and coated with a military-grade PTFE (Teflon), preventing surface corrosion. Due to the 6" wide PowerStep™ XL’s rugged alloy construction, these steps can withstand a whopping 600 pounds, far heavier than traditional side steps!
For added convenience, these steps feature bright LED chips integrated into the central rail, casting a vibrant glow onto the step surface and surrounding area to ensure sure-footed entry, no matter the time of day. For the ultimate blend of styling and convenience for your lifted pickup, check out the AMP Research PowerStep™ XL.
AMP Research is a RealTruck® company, so when you order a pair of PowerStep™ XL running boards from us, you’re ordering directly from the manufacturer. Like all PowerStep™ products, the PowerStep™ XL is backed with an industry-leading 5-year limited warranty.
Automatic deployment for easy access
Durable construction for long-lasting use
Sleek design enhances vehicle aesthetics
Weather-resistant for all conditions
Easy installation with no drilling required
Compatible with various truck models
Specifications
Step Length: Cab Length
Step Type: Single-Motor Retracting Step
Step Finish: Textured Black Powder Coat
Step Material: Aluminum
Step Mount: Mounts to Rocker Panel
Warranty: 5 Year Limited Warranty
Step Width: 6 Inch
Features & Benefits
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant cast aluminum construction
Anodized, then finished with a military-grade PTFE coating
6-inch wide, cab-length step area
Textured, slip-resistant step surface
Integrated LED lighting illuminated steps for safe entry
Optional Override Switch is available for manual control
Includes vehicle-specific installation guide, mount kit, and hardware
Mounts to vehicle’s rocker panel
Connects to OBDII port using patented Plug-N-Play module
5-year limited warranty
InstallationInstallationInstall Guide 1
Americas Garage PowerStep XL Electric Running Boards suits Ford F-150...
$3,990.00
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant cast aluminum construction
Anodized, then finished with a military-grade PTFE coating
6-inch wide, cab-length step area
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium single-motor design for automatic deployment
Corrosion-resistant cast aluminum construction
Textured slip-resistant step surface for safety
Integrated LED lighting for safe entry at night
Specifications
Step Length: Cab Length
Step Type: Single-Motor Retracting Step
Step Finish: Textured Black Powder Coat
Step Material: Aluminum
Step Mount: Mounts to Rocker Panel
Warranty: 5 Year Limited Warranty
Step Width: 6 Inch
Features & Benefits
Lowest deployed power-retractable running boards
XL boards extend 4-inches lower than original PowerStep
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant cast aluminum construction
Anodized, then finished with a military-grade PTFE coating
6-inch wide, cab-length step area
Textured, slip-resistant step surface
Integrated LED lighting illuminated steps for safe entry
Optional Override Switch is available for manual control
Includes vehicle-specific installation guide, mount kit, and hardware
Mounts to vehicle’s rocker panel
Connects to OBDII port using patented Plug-N-Play module
5-year limited warranty
InstallationInstallationInstall Guide 1
Americas Garage PowerStep Electric Running Boards suits Chev 1500 (19-26),...
$3,190.00
Every truck, Jeep®, or SUV can benefit from a set of running boards. However, only some consumers enjoy the aesthetics. For those who prefer clean, streamlined looks, AMP Research® offers its patented PowerStep™. These heavy-duty, power retractable running boards offer the best of both worlds, deploying when needed and retracting under the body when not in use to preserve looks and ground clearance.
As the pinnacle of quality, AMP Research utilizes only the finest materials in its PowerStep line. Die-cast aluminum boards offer exceptional strength at a low weight, while stainless steel hinge pins and hardware deliver unmatched durability and corrosion resistance. The step's surface is treated with a military-grade PTFE coating, guarding the underlying alloy against oxidation and abrasions—the black finish also provides a sleek, discreet appearance.
AMP Research PowerStep running boards make entering and exiting even the tallest vehicles a breeze. Featuring extra-wide, 6-inch, non-slip step tread, AMP PowerSteps promote traction in even the worst weather conditions. The integrated low-profile LED courtesy lights illuminate the step surface and surrounding area to ease entry in low-visibility conditions. As a bonus, PowerStep drops far lower than traditional fixed-position running boards, giving passengers a much-needed boost.
To simplify the installation process, each set of PowerStep running boards includes a vehicle-specific mounting kit, thorough instructions, and—if applicable—a plug-n-play OBD II module. Each mounting kit contains all necessary mounting brackets, hardware, wiring accessories, and instructions.
To ease entry into your ride without sacrificing aesthetics, consider PowerStep running boards by AMP Research—a RealTruck brand. We back each PowerStep order with a limited 5-year warranty.
Features & Benefits
The original power-retractable running boards
Premium, single-motor design automatically deploys and retracts boards
Corrosion-resistant die-cast aluminum construction
Military-grade black PTFE coating
6-inch wide, cab-length steps
Textured, slip-resistant step surface
Low-profile integrated LED courtesy lights
Optional Override Switch is available for manual control
Includes vehicle-specific installation guide and mount kit
Mounts to vehicle's rocker panel
Newer applications connect to OBDII port via Plug-N-Play module
Professional installation recommended
5-year limited warranty
InstallationInstallationInstall Guide 1
Americas Garage 6.6L Cold Air Intake suits Chev 2500 (11-19)...
$1,250.00
Maximum Performance Our cold air intake for the 2017-2019 Silverado / Sierra Duramax 6.6L was engineered to minimize air restriction and flows 47.70% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. No More Check Engine Lights S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. Silicone Integrated Scoop On the L5P intake kit, we have an integrated silicone air scoop that feeds even more air to the filter. Multiple Air Inlets More air equals better performance. The L5P intake kit features two large air inlet points. If you want to customize the amount of air you take in, we include an optional box plug that can seal off one inlet point.
Similar/Previous: ,SB75-5144
Maximum airflow for superior performance
Highly efficient air filter for engine protection
Engineered to prevent check engine lights
Integrated silicone scoop for increased air intake
Fully enclosed airbox shields filter from dirt
Customizable air intake options for flexibility
InstallationInstallation
Install Guide 1
Estimated time: 1 hour
Difficulty: Medium
Install Tools
8mm, 10mm, 13mm Wrench/Socket, T20 Torx, Phillips Screwdriver, Panel Popper
Americas Garage PowerStep Electric Running Boards suits Ram 2500/3500 (2013+)...
$3,390.00
Getting into your truck shouldn't feel like climbing Mount Everest. That's why AMP Research invested in POWERSTEP, the automatic, electric-powered running board that instantly extends when you open your door, and then hides itself safely out of sight when the doors close for improved ground clearance, aerodynamics and appearance. Its handsome design, all-weather performance and legendary reliability set the industry standard.
Automatic electric running boards for easy access to your truck
Extends when doors open and retracts when closed
Improves ground clearance and aerodynamics
All-weather performance for year-round use
Stylish design enhances your vehicle's appearance
Legendary reliability sets the industry standard
InstallationInstallation
Install Guide 1
Estimated time: 5 hours
Difficulty: Hard
Americas Garage 6.6L Duramax Cold Air Intake suits Chev 2500...
$1,000.00
MAXIMUM PERFORMANCE
Our cold air intake for the Silverado / Sierra Duramax L5P 6.6L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
NEW SNAP IN LID DESIGN
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.(Patent Pending)
PREMIUM SILICONE COMPONENTS
The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber that will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
CHOOSE YOUR AIRFLOW
More air equals better performance. The Duramax L5P 6.6L intake features three air inlet points. If you want to customize the amount of air you take in, we provide an optional box plug that can seal off one inlet point.
When to use the Box Plug?
Stock intake boxes are a significant contributor to poor airflow which is why S&B designs custom air boxes with secondary and/or enlarged openings. With that said, S&B recognizes the benefits of cooler air, so we have included a plug to seal off the opening if desired. For optimal performance, we recommend that the intake be used without the box plug, except in conditions of an extreme heatwave.
NO CHECK ENGINE LIGHTS
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
Similar/Previous: ,SB75-5136
Engineered for maximum airflow and performance
Fully enclosed airbox protects filter from dirt and heat
Snap-in lid design for quick and easy installation
Premium silicone components ensure durability and longevity
Customizable airflow with optional box plug
Designed to avoid check engine lights for smooth operation
InstallationInstallation
Install Guide 1
Estimated time: 2 hours
Difficulty: Medium
Install Tools
Warning: Failure to disable the Air Filter Life System will cause a warning light that can only be reset by a GM Dealer. Please ensure you have disabled the system prior to driving the vehicle with your new S&B Intake. Please refer to steps 22-26 to cover this procedure. Our video here explains how to disable as well.
Socket Wrench, 8mm, 10mm, 13mm Socket, ¼” Socket Extension, 5/16” Socket/Nut Driver, T20 Torx, Phillips Head Screwdriver
Americas Garage Cummins 6.7L Cold Air Intake suits Ram 2500...
$499.00
MAXIMUM PERFORMANCE
Our cold air intake for the Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
The Sound Of Performance.
The huge air filter and tube produce a more aggressive sound than stock. Check out how it sounds from inside and outside the vehicle.
PREMIUM SILICONE COMPONENTS
The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
NO CHECK ENGINE LIGHTS
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights. Featuring an injection Molded MAF (Mass Air Flow) plate and IAT (Intake Air Temperature) that ensures true o-ring seal to the sensor.
RAM AIR SCOOP FITMENT SEALS BETTER THAN STOCK
The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.
Similar/Previous: ,SB75-5132
Engineered for maximum airflow and performance
Fully enclosed airbox protects filter from dirt
Produces an aggressive sound for enhanced driving experience
Premium silicone components ensure durability and longevity
Designed to avoid check engine lights for peace of mind
Rubberized seal fitment reduces airflow loss for optimal efficiency
Specifications
Oil color: Red
Quantity of oil: 202 grams
Carb exempt id: D-590-51
Street legal in all us states: Yes
InstallationInstallation
Install Guide 1
Estimated time: 2 hours
Difficulty: Medium
Install Tools
Flathead screwdriver
T20 Torx bit and driver
10mm, 11mm, Combination of Wrench or Socket and Driver
5/16” Nut Driver or socket (possible extension needed)
Panel Popper
Step Stool (Optional)
Americas Garage Powerstroke 6.7L Cold Air Intake suits Ford F-250...
$499.00
Enhance your engine's performance with our advanced cold air intake system designed for maximum airflow and efficiency. Experience improved horsepower and torque while ensuring optimal filtration to protect your engine. Easy installation and durable construction make this a must-have upgrade for any serious enthusiast. Unlock the full potential of your vehicle with our high-performance intake solution.
Similar/Previous: ,SB75-5085
Enhances engine performance with improved airflow
Increases horsepower and torque for a thrilling drive
Advanced filtration protects your engine from debris
Easy installation for a hassle-free upgrade
Durable construction ensures long-lasting performance
Unlocks the full potential of your vehicle's engine
Americas Garage 5.0L Cold Air Intake suits Ford F-150 (15-20)...
$499.00
MAXIMUM PERFORMANCE
Our cold air intake was engineered to minimize air restriction and flows 40% better than stock.
HUGE SILICONE AIR SCOOP
Features a larger-than-stock silicone air scoop that feeds more cold air to the filter.
Snap In Lid Design
Our new snap-In lid design requires no screws to secure it to the box.
Huge Intake Tube and Air Filter
The inlet at the filter leads to unrestricted airflow through our high-flow intake tube.
Demand Better. Demand S&B.
Similar/Previous: ,SB75-5083
Engineered to minimize air restriction and flows 40% better than stock
Larger-than-stock silicone air scoop for increased cold air intake
Snap-In lid design for easy installation and inspection
High-flow intake tube for unrestricted airflow
Protects engine from heat and debris
Demand better performance with our premium design
InstallationInstallation
Install Guide 1
Estimated time: 2 hours
Difficulty: Medium
Install Tools
10mm, 13mm Wrench & Socket
5/16” Nut Driver & 1/4” Nut Driver or Flat Blade Screwdriver
Phillips Screwdriver, Pliers or Channel Locks
Americas Garage Long Range Fuel Tank, 208L, Crew Cab, 8'0...
$2,950.00
Titan Fuel Tanks is once again revolutionizing the industry with the release of the new Gen 7 XXL Replacement Fuel Tanks. Our tanks are the most advanced and capable XXL fuel tanks ever produced. Constructed from our renowned High-Density Cross-Linked Polyethylene (XLHDPE), they offer unmatched durability and a lifetime warranty, surpassing any other fuel tank on the market.
The Gen 7 tanks boast three innovative new features to maximize versatility:
A fast fill vent kit for hassle free fueling at high-flow truck stop pumps, a universal pickup tube compatible with high-pressure fuel systems, and a transfer pump kit, allowing you to conveniently fuel other vehicles directly from your XXL replacement tank. These kits are optional and sold separately. They can be found at the bottom of this page.
The Titan 208L (55 Gallon) Extra Capacity Mid-Ship Replacement Fuel Tank, designed specifically for 2025 Ram 2500 and 3500 pickups with Crew Cabs/Quad Cabs, Long Beds, and Cummins engines. With this innovative upgrade, you're not just investing in a larger fuel tank - you're investing in unparalleled freedom and convenience on the road.
The tank comes complete with black-coated, galvanized steel mounting straps. Plus, with its exclusive low fuel trap design all 208L (55 gallons) are usable capacity. We could advertise a larger capacity, but we chose to only market usable capacity to set honest and reasonable expectations for our customers. The Titan XXL tank also features minimal hang down below the bottom of the stock tank (approximately only 2.5" lower).
Installation is a breeze - no fabrication or cutting required. This tank is a direct fit, bolt-in application, making it the perfect upgrade for your Ram 2500 or 3500 pickup.
Titan Fuel Tanks introduces the Gen 7 XXL Replacement Fuel Tanks for unmatched durability and performance
Constructed from High-Density Cross-Linked Polyethylene for a lifetime warranty
Fast fill vent kit for hassle free fueling at high-flow truck stops
Universal pickup tube compatible with high-pressure fuel systems
Transfer pump kit allows fueling of other vehicles directly from the tank
Direct fit installation with no fabrication or cutting required
Important Notes
The TITAN tank is 76 litres (20 gallons) larger at 208L (55 gallons). The stock tank is only 132 litres (35 gallons).
Will not interfere with powered steps, air bag systems and most other accessories.
Our mid-ship, direct replacement fuel tanks are designed to use your trucks’ stock/OE sending unit. However, our tanks are compatible with Fleece, AirDog, FASS, etc.
Not for use on trucks that were ordered from the factory with the optional larger 48/50 gallon RAM tank.
Americas Garage 5.7L Cold Air Intake suits Toyota Tundra (07-21)...
$499.00
MAXIMUM PERFORMANCE Our cold air intake for the Toyota Tundra / Sequoia 5.7L was engineered to minimize air restriction and flows 51.51% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. HIGH FLOW FILTER AND LARGE TUBE. The inlet at the filter lead to unrestricted airflow all the way to the throttle body through our high-flow intake tube. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
Similar/Previous: ,SB75-5039
Maximize airflow and performance with a cold air intake system
Fully enclosed airbox protects filter from dirt and heat
High-flow filter enhances engine efficiency and longevity
Available in cleanable cotton or dry extendable media
Unrestricted airflow to throttle body for optimal performance
Engineered to minimize air restriction for superior results
Specifications
Filter type: Cotton Cleanable
Oil color: Red
Quantity of oil: 85 grams
Quantity of oil power stack: 20 grams
Street legal in all us states: No
InstallationInstallation
Install Guide 1
Estimated time: 2 hours
Difficulty: Medium
Install Tools
Required Tools
8mm, 10 mm socket wrench
Phillips Screwdriver
Americas Garage Long Range Fuel Tank, 197L, Crew Cab, 6'4...
$2,950.00
Titan Fuel Tanks is once again revolutionizing the industry with the release of the new Gen 7 XXL Replacement Fuel Tanks. Our tanks are the most advanced and capable XXL fuel tanks ever produced. Constructed from our renowned High-Density Cross-Linked Polyethylene (XLHDPE), they offer unmatched durability and a lifetime warranty, surpassing any other fuel tank on the market.
The Gen 7 tanks boast three innovative new features to maximize versatility:
A fast fill vent kit for hassle free fueling at high-flow truck stop pumps, a universal pickup tube compatible with high-pressure fuel systems, and a transfer pump kit, allowing you to conveniently fuel other vehicles directly from your XXL replacement tank. Titan's Gen 7 tanks are designed to meet the needs of diesel truck owners who demand more from their fuel tanks.
The 72L (52 Gallon) Extra Capacity Mid-Ship Replacement Fuel Tank is designed specifically for 2025+ Ram 2500 and 3500 4x4 pickups with Crew Cabs, short beds, and Cummins engines. Whether you're towing heavy loads, embarking on cross-country adventures, or simply navigating daily commutes, the extra capacity provided by a Titan XXL Tank gives you the confidence and peace of mind to go the distance, no matter where the road takes you.
The tank comes complete with a black-coated, galvanized steel mounting straps. Plus, with its exclusive low fuel trap design, all 72L (52 gallons) are usable capacity. We could advertise a larger capacity, but we chose to only market usable capacity to set honest and reasonable expectations for our customers. The Titan XXL tank also features minimal hang down below the bottom of the stock tank (approximately only 2" lower).
Installation is a breeze - no fabrication or cutting required. This tank is a direct fit, bolt-in application, making it the perfect upgrade for your Ram 2500 or 3500 pickup.
Titan Fuel Tanks offers unmatched durability with a lifetime warranty
The Gen 7 tanks feature a fast fill vent kit for hassle free fueling
Designed for 2025 Ram 2500 and 3500 with extra capacity for long journeys
Installation is easy with a direct fit bolt-in application
Compatible with high-pressure fuel systems for versatile use
Exclusive low fuel trap design ensures all capacity is usable
InstallationInstallation
Estimated time: 4 hours
Difficulty: Medium
Important Notes
For 2500 and 3500 models with the Cummins diesel engine.
For 4x4 trucks ONLY. It will not fit 2 wheel drive
The TITAN tank is 21 gallons larger at 52 gallons. The stock tank is only 31 gallons.
Will not interfere with powered steps, air bag systems and most other accessories.
Our mid-ship, direct replacement fuel tanks are designed to use your trucks stock/OE sending unit. However, our tanks are compatible with Fleece, AirDog, FASS, etc.
Not for use on the trucks that were ordered from the factory with the optional 48/50 gallon RAM tank.
This tank does NOT fit cab & chassis models. It is ONLY for use on trucks with traditional pick-up truck short beds.
Americas Garage Long Range Fuel Tank, 197L (Crew Cab, 6'4...
$2,950.00
The Ram 2500 Crew Cab 197L Long Range Replacement Tank is the ideal choice for extended range and exceptional durability. Crafted from military grade, cross-linked polymer for superior strength and reliability, it features a 197L diesel tank for superior fuel capacity and long range. The tank is a direct replacement for your existing tank and will keep you on the road, for longer! TITAN Fuel Tanks Direct Replacement, Mid-Ship Fuel Tanks are manufactured to use the trucks stock/original equipment fuel sending unit. The trucks stock sending unit is removed from the stock tank and mounted into the TITAN tank. They are a direct fit, there are no modifications needed. With use of the stock sending unit, the trucks analog fuel gauge will read correct and accurate with the TITAN tank.
Exceptional durability with military grade cross-linked polymer
197L capacity for extended range and fewer stops
Direct replacement for easy installation with no modifications
Accurate fuel gauge reading with stock sending unit
Designed for Ram 2500 Crew Cab models from 2013 to 2024
Keep your adventures going longer with Titan Tanks
InstallationInstallation
Install Guide 1
Estimated time: 4 hours
Difficulty: Medium
Important Notes
Not suitable for 2025+ RAM 2500/3500. Use 7030125.
For 2013+ Ram 2500/3500 Crew Cab models with Cummins 6.7L Diesel engines.
Americas Garage Mega Cab, Short Bed, Long Range Fuel Tank,...
$2,950.00
Titan Fuel Tanks is once again revolutionizing the industry with the release of the new Gen 7 XXL Replacement Fuel Tanks. Our tanks are the most advanced and capable XXL fuel tanks ever produced. Constructed from our renowned High-Density Cross-Linked Polyethylene (XLHDPE), they offer unmatched durability and a lifetime warranty, surpassing any other fuel tank on the market.
The Gen 7 tanks boast three innovative new features to maximize versatility:
A fast fill vent kit for hassle free fueling at high-flow truck stop pumps, a universal pickup tube compatible with high-pressure fuel systems, and a transfer pump kit, allowing you to conveniently fuel other vehicles directly from your XXL replacement tank. These kits are optional and sold separately. They can be found at the bottom of this page.
The Titan 72L (50 Gallon) Extra Capacity Mid-Ship Replacement Fuel Tank, designed specifically for 2025 Ram 2500 and 3500 pickups with Mega Cabs, Short Beds, and Cummins engines. With this innovative upgrade, you're not just investing in a larger fuel tank - you're investing in unparalleled freedom and convenience on the road.
The tank comes complete with a black-coated, galvanized steel mounting strap and front support system. Plus, with its exclusive low fuel trap design all 50 gallons are usable capacity. We could advertise a larger capacity, but we chose to only market usable capacity to set honest and reasonable expectations for our customers. The Titan XXL tank also features minimal hang down below the bottom of the stock tank (approximately only 2.5" lower).
Installation is a breeze - no fabrication or cutting required. This tank is a direct fit, bolt-in application, making it the perfect upgrade for your Ram 2500 or 3500 pickup.
Titan Fuel Tanks offers unmatched durability with a lifetime warranty
The Gen 7 tanks feature a fast fill vent kit for hassle free fueling
Designed specifically for 2025 Ram 2500 and 3500 pickups
Installation is a breeze with a direct fit bolt-in application
Exclusive low fuel trap design ensures all 72 litres (50 gallons) are usable
Invest in unparalleled freedom and convenience on the road
InstallationInstallation
Estimated time: 4 hours
Difficulty: Medium
Important Notes
The TITAN tank is 19 gallons larger at 50 gallons. The stock tank is only 31 gallons.
Will not interfere with powered steps, air bag systems and most other accessories.
Our mid-ship, direct replacement fuel tanks are designed to use your trucks’ stock/OE sending unit. However, our tanks are compatible with Fleece, AirDog, FASS, etc.
Not for use on the trucks that were ordered from the factory with the optional larger 48/50 gallon RAM tank.
Americas Garage Bonnet Protector/Hood Shield, Chrome suits Ram 2500/3500 (13-18)...
$50.00
There’s nothing worse than hearing the familiar clink of a rock chipping your windshield or the audible splatter of bugs across the glass. If only there were ways to prevent unsightly chips and bug guts. Luckily, RealTruck has the solution: the AVS® Chrome Bug Deflector! This premium bug deflector features a durable construction, snug vehicle-specific fitment, and a lustrous chrome finish, making it the ideal addition to any truck, Jeep, or SUV.
The AVS® Chrome Bug Deflector features heavy-duty acrylic construction that resists impacts and abrasions for long-lasting service life. Thanks to its innovative shape and high-profile design, insects and debris that come into contact with the deflector glide up and over the cab rather than into the hood, windshield, or roof!
The AVS® Chrome Bug Deflector features lustrous chrome plating that perfectly complements chrome accents like grilles, running boards, bumpers, and wheels! AVS® uses the same plating technologies as OEM manufacturers, ensuring years of peel and pit-free performance.
This product comes in an off-the-hood design, creating clearance between the hood and deflector to fit a wash mitt or microfiber towel to clean dirt and debris. This design also prevents the scuffs and paint wear of lesser-quality bug deflectors that rest directly on the hood.
The AVS® Chrome Bug Deflector features a simple no-drill installation utilizing vehicle-specific mounting hardware, 3M double-sided adhesive, or a combination of the two. AVS® proudly manufactures the Chrome Bug Deflector in the USA with global materials and backs the product with a limited lifetime warranty.
Similar/Previous: ,AVS680120
Impact-resistant acrylic construction
Custom-molded for a tight fit
High-profile wrap-around design
Protects against bugs and debris
OEM-quality chrome plating
Easy no-drill installation
Specifications
Finish: Chrome
Warranty: Limited Lifetime
Material: Impact Resistant Acrylic
Country of Origin: USA
Features & Benefits
Impact-resistant acrylic construction
Custom-molded for a tight, vehicle-specific fitment
High-profile wrap-around design
Protects against bugs, dirt, and road debris
OEM-quality chrome plating
UV and scratch-resistant
Off-the-hood design for easy cleaning
Car-wash safe
Attaches with 3M double-sided adhesive tape and/or no-drill fasteners
Limited lifetime warranty
Proudly assembled in Georgia
InstallationInstallation
Install Guide 1
Estimated time: 0.5 hours
Difficulty: Easy
Install Tools
Car Wash Supplies
Clean Towel
Phillips screwdrive
Americas Garage Bonnet Protector/Hood Shield, Chrome suits Ram 1500 DS...
$50.00
Perfect for your Ram 1500 DS Laramie with Chrome Grille! There’s nothing worse than hearing the familiar clink of a rock chipping your windshield or the audible splatter of bugs across the glass. If only there were ways to prevent unsightly chips and bug guts. Luckily, RealTruck has the solution: the AVS® Chrome Bug Deflector! This premium bug deflector features a durable construction, snug vehicle-specific fitment, and a lustrous chrome finish, making it the ideal addition to any truck, Jeep, or SUV. The AVS® Chrome Bug Deflector features heavy-duty acrylic construction that resists impacts and abrasions for long-lasting service life. Thanks to its innovative shape and high-profile design, insects and debris that come into contact with the deflector glide up and over the cab rather than into the hood, windshield, or roof! The AVS® Chrome Bug Deflector features lustrous chrome plating that perfectly complements chrome accents like grilles, running boards, bumpers, and wheels! AVS® uses the same plating technologies as OEM manufacturers, ensuring years of peel and pit-free performance. This product comes in an off-the-hood design, creating clearance between the hood and deflector to fit a wash mitt or microfiber towel to clean dirt and debris. This design also prevents the scuffs and paint wear of lesser-quality bug deflectors that rest directly on the hood. The AVS® Chrome Bug Deflector features a simple no-drill installation utilizing vehicle-specific mounting hardware, 3M double-sided adhesive, or a combination of the two. AVS® proudly manufactures the Chrome Bug Deflector in the USA using global materials and backs the product with a limited lifetime warranty.
Similar/Previous: ,AVS680045
Impact-resistant acrylic construction
Custom-molded for a tight fit
High-profile wrap-around design
Protects against bugs and debris
OEM-quality chrome plating
Easy off-the-hood cleaning
Specifications
Finish - Chrome
Warranty - Limited Lifetime
Material - Impact Resistant Acrylic
MADE IN USA
Features & Benefits
Impact-resistant acrylic construction
Custom-molded for a tight, vehicle-specific fitment
High-profile wrap-around design
Protects against bugs, dirt, and road debris
OEM-quality chrome plating
UV and scratch-resistant
Off-the-hood design for easy cleaning
Car-wash safe
Attaches with 3M double-sided adhesive tape and/or no-drill fasteners
Limited lifetime warranty
Proudly assembled in Georgia
InstallationInstallation
Estimated time: 0.3 hours
Difficulty: Easy
Americas Garage Long Range Fuel Tank, 208L (Crew Cab, 6'8...
$2,950.00
When you need to stay on the road longer, the 2017+ Ford F250 / F350 Crew Cab 208L Long Range Replacement Tank is the perfect choice. Constructed with military-grade, cross-linked polymer and designed to provide a direct fit, installation is easy and hassle-free. Enjoy 208L of long-range fuel capacity to get the most out of your vehicle on every adventure!
TITAN Fuel Tanks Direct Replacement, Mid-Ship Fuel Tanks are manufactured to use the trucks stock/original equipment fuel sending unit. The trucks stock sending unit is removed from the stock tank and mounted into the TITAN tank. They are a direct fit, there are no modifications needed.
With use of the stock sending unit, the trucks analog fuel gauge will read correct and accurate with the TITAN tank.
For 2017+ Ford F250 / F350 Crew Cab models with Powerstroke 6.7L Diesel engines and 6'7 tubs.
InstallationInstallation
Install Guide 1
Estimated time: 4 hours
Americas Garage Long Range Fuel Tank, 210L (Crew Cab) suits...
$2,950.00
The Chevrolet Silverado 2500 212L Long Range Replacement Tank is a durable solution for added fuel capacity. Crafted from military grade cross-linked polymer, it is tougher than steel and more durable than aluminum. Backed by Titan Fuel Tanks' commitment to quality, the tank is designed to last wherever you may roam. TITAN Fuel Tanks Direct Replacement, Mid-Ship Fuel Tanks are manufactured to use the trucks stock/original equipment fuel sending unit. The trucks stock sending unit is removed from the stock tank and mounted into the TITAN tank. They are a direct fit, there are no modifications needed. With use of the stock sending unit, the trucks analog fuel gauge will read correct and accurate with the TITAN tank.
The Chevrolet Silverado 2500 212L Long Range Replacement Tank is a durable solution for added fuel capacity. Crafted from military grade cross-linked polymer, it is tougher than steel and more durable than aluminum. Backed by Titan Fuel Tanks' commitment to quality, the tank is designed to last wherever you may roam. TITAN Fuel Tanks Direct Replacement, Mid-Ship Fuel Tanks are manufactured to use the trucks stock/original equipment fuel sending unit. The trucks stock sending unit is removed from the stock tank and mounted into the TITAN tank. They are a direct fit, there are no modifications needed. With use of the stock sending unit, the trucks analog fuel gauge will read correct and accurate with the TITAN tank.
InstallationInstallation
Install Guide 1
Estimated time: 4 hours
Important Notes
Hellwig aftermarket rear sway bar #7782 is not compatible with this tank (7010320)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
