HERTZ Spl Show 1.8" (46Mm) High Efficiency Compression Driver -...
$524.99
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only.
Component
HIGH EFFICIENCY COMPRESSION DRIVER
Size mm (in.)
46 (1.8)
Power Handling - Peak W
120
Power Handling - Peak Note
Hi-pass filtered @ 5 kHz - 12 dB Oct.
Impedance Ohm
4
Voice Coil Ø
35 (1.4)
Frequency Response Hz
2k ÷ 20k
Weight of one component kg (lb.)
0,53 (1.17)
Magnet
Neodymium
Dome
Aluminium
D mm
46
Re Ohm
3,3
Fs Hz
4000
Le mH
0,02
BL T*m
3,5
Spl dB
109
A
69 mm
2.72 in.
B
52 mm
2.05 in.
C
65,7 mm
2.59 in.
D
33,3 mm
1.31 in.
HERTZ Mille Pro 6X9" 3-Way Coaxial Speaker - Pair (Mpx...
$524.99
The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.
Component
Coaxials
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
30 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
107 x 45 x 20 (4.21 x 1.77 x 0.79)
Weight of one speaker kg (lb.)
2.28 (5.03)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±8 (0.31)
D mm
169
Re Ohm
3
Fs Hz
50
Le mH
0,07
Vas I
24
Mms g
30
Cms mm/N
0,34
BL T*m
7,2
Qts
0,43
Qes
0,55
Qms
2
Spl dB
94
A
241 mm
9.49 in.
B
223 mm
8.74 in.
C
108 mm
4.25 in.
D
90 mm
3.54 in.
E
267 mm
10.53 in.
F
38,5 mm
1.52 in.
HERTZ Mille Pro 6.5" 2-Way Coaxial Speaker - Pair (Mpx...
$419.99
The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations.
Component
Coaxials
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
36 (1.42)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 21,5k
Woofer Magnet size D x d x h mm (in.)
90 x 45 x 17 (3.54 x 1.77 x 0.67)
Tweeter Magnet size D x h mm (in.)
29.5 x 22 x 4 (1.16 x 0.87 x 0.16)
Weight of one speaker kg (lb.)
1.27 (2.8)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±6 (0.24)
D mm
132
Re Ohm
3,1
Fs Hz
90
Le mH
0,01
Vas I
4
Mms g
18,9
Cms mm/N
0,15
BL T*m
5,8
Qts
0,88
Qes
1,06
Qms
5,5
Spl dB
92
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D
62,6 mm
2.46 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Pro 3" Midrange Speaker - Pair (Mp 70.3...
$314.99
The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @250Hz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
180 ÷ 18k
Magnet size D x d x h mm (in.)
19.7 x 0 x 2 (0.78 x 0 x 0.08)
Weight of one speaker kg (lb.)
0.17 (0.37)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
D mm
65
Re Ohm
3,7
Fs Hz
110
Le mH
0,12
Vas I
1
Mms g
2,9
Cms mm/N
0,7
BL T*m
2,8
Qts
0,82
Qes
1
Qms
4,6
Spl dB
88
A
87,8 mm
3,46 in.
B
73 mm
2,87 in.
C
50 mm
1.97 in.
D
44 mm
1.73 in.
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Mille Pro 28Mm (1.38") Tweeters And Crossovers - Pair...
$314.99
MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k ÷ 25k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,075 (0.16)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,024
Vas I
-
Mms g
0,4
Cms mm/N
0,08
BL T*m
2
Qts
1,1
Qes
1,7
Qms
3,3
Spl dB
91
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
28 mm
11.1 in.
D
13,5 mm
0.53 in.
E
72 mm
2.8 in.
F
45,6 mm
1.8 in.
G
23 mm
0.9 in.
HERTZ Mille Pro 25Mm (1") Tweeter - Pair (Mp 25.3...
$259.99
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Component
Tweeter
Size mm (in.)
29 (1.14)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
1.4k ÷ 22.5k
Magnet size D x d x h mm (in.)
24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
0.07 (0.14)
Magnet
Neodymium
Dome
Tetolon
D mm
29
Re Ohm
3,9
Fs Hz
1200
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,1
BL T*m
1,6
Qts
0,55
Qes
1,98
Qms
0,57
Spl dB
91
A
44 mm
1.73 in.
B
41 mm
1.61 in.
C
27 mm
1.06 in.
D
17 mm
0.67 in.
HERTZ Mille Pro 6.5" Woofer Component - Pair (Mp 165P.3...
$479.99
The MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
3
Voice Coil Ø
25 (1)
Frequency Response Hz
45 ÷ 4,5k
Magnet size D x d x h mm (in.)
95 x 45 x 17 (3.74 x 1.77 x 0.67)
Weight of one speaker kg (lb.)
1.2 (2.65)
Magnet
High density flux ferrite
Cone
Pressed-pulp cone with cotton fibers
Xmech mm (in.)
±7.5 (0.3)
D mm
132
Re Ohm
2,6
Fs Hz
75
Le mH
0,28
Vas I
8
Mms g
15,1
Cms mm/N
0,3
BL T*m
5,45
Qts
0,56
Qes
0,63
Qms
5,2
Spl dB
94
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74,5 mm
2.93 in.
D
64 mm
2.52 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Pro 6.5" Woofer Component - Pair (Mp 165.3...
$314.99
Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 car audio woofers boast outstanding dispersion features and generates high SPL with compact dimensions, ensuring a wide low frequency response, even in cars with no space for a subwoofer.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
90
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
40 ÷ 5k
Magnet size D x d x h mm (in.)
85 x 32 x 17 (3.35 x 1.26 x 0.67)
Weight of one speaker kg (lb.)
1.07 (2.36)
Magnet
High density flux ferrite
Cone
Pressed-pulp cone with cotton fibers
Xmech mm (in.)
±7 (0.28)
D mm
132
Re Ohm
3,1
Fs Hz
70
Le mH
0,3
Vas I
9,5
Mms g
14,9
Cms mm/N
0,36
BL T*m
5,5
Qts
0,58
Qes
0,67
Qms
4,6
Spl dB
93
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D
63 mm
2.48 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Legend 3" 2-Way Component Speaker - Pair (Mlk...
$1,469.99
The MLK 700.3 Legend car audio speakers system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between ML 1650.3 and ML 1800.3 actively filtered in a multi-amplified configuration. MLK 700.3 Legend is composed of the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound. The V-cone® exponential profile without the traditional dustcap gets close to the perfect one, generating exceptional dispersion: thanks to the synergistic action of these technological elements, ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend. Thanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure. The uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions.
Component
System
Size mm (in.)
70 (3)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Tweeter diaphragm mm (in.)
35 (1.38)
Woofer Voice Coil Ø mm (in.)
20 (0.8)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Sensitivity dB SPL
Midrange 90 Tweeter 92
Frequency Response Hz
200 ÷ 28k
Crossover Cut off
4.5 kHz - 6/12 dB Oct.
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
0,210 (0.46)
Weight of one component - Tweeter kg (lb)
0,1 (0.22)
Weight of one component - Crossover kg (lb)
0,57 (1.26)
D mm
65
Re Ohm
3,8
Fs Hz
110
Le mH
0,05
Vas I
1,1
Mms g
2,7
Cms mm/N
0,7
BL T*m
3,3
Qts
0,57
Qes
0,67
Qms
4
Spl dB
90
HERTZ Mille Legend 3" Midrange Speaker - Pair (Ml 700.3...
$629.99
The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the threespoke anti-resonant aluminium alloy basket with vented holes.Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions.
1. Neodymium magnet optimized with FEA simulations, for superior dynamics and control.2. Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.3. Extremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.4. Exponential V-cone® with optimized geometry for utmost linearity and dispersion.5. CONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.8. Junction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.9. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.10. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.11. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @ 250Hz - 12dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
200 - 20k
Magnet size D x d x h mm (in.)
45 x 25 x 3,5 (1.77 x 0.98 x 0.13)
Weight of one speaker kg (lb.)
0,21 (0.46)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibres
D mm
65
Re Ohm
3,8
Fs Hz
110
Le mH
0,05
Vas I
1,1
Mms g
2,7
Cms mm/N
0,7
BL T*m
3,3
Qts
0,57
Qes
0,67
Qms
4
Spl dB
90
A
87,8 mm
3.45 in
B
74 mm
2.91 in
C
47 mm
1.85 in
D
41,3 mm
1.62 in
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Dieci 6" 2-Way Component Speaker - Pair (Dsk 160.3)
$239.99
Product info:
component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers
6" treated paper woofer with polyurethane surround
separate PEI dome tweeter with external crossover
includes tweeter mounts, plus adapter rings for select GM and Honda vehicles
handles up to 80 watts RMS (180 watts peak power)
frequency range: 50-23,000 Hz
sensitivity: 94 dB (1 watt at 1 meter)
woofer mounting depth: 2-1/4"
impedance: 4 ohms
grilles not included
warranty: 2 years
MFR # DSK 160.3
Item # 301DSK1603
Size Classification Note: Hertz describes these woofers as 6", but they fit many standard 6½" and 6¾" applications. The included adapter brackets are used to fit several specialized factory speaker applications. The brackets are also useful as a spacer in shallow locations; the brackets add just over ¼" to the woofers' mounting height and subtract just over ¼" from the mounting depth. Please enter your vehicle information to confirm fit.
Tweeter Mounting: Brackets are included for flush mounting and angled surface mounting (60° or 30°) the tweeters.
Tweeter Mounting Dimensions:
Flush Mount
60° Angled Surface Mount
30° Angled Surface Mount
Mounting Height
0.366"
1.232"
1.515"
Depth
0.426"
N/A
N/A
Frame Diameter
1.605"
N/A
N/A
Cutout Diameter
1.420"
N/A
N/A
Frame Width
N/A
1.463"
1.463"
Frame Depth
N/A
1.535"
1.255"
Crossovers: The included 48" tweeter wires have high pass crossovers wired in-line. The input end of each wire is terminated with female quick slides that attach to the woofer terminals, and the output end has terminals that mate to the terminals on the wire attached to the tweeters. The crossover point is 3.5 kHz and the slope is 6 dB/octave. Each crossover is approximately 1" long and ⅜" at its widest point. The woofer is not crossed over.
General
Speaker Size
6
Driver Design
2-way
Woofer Design
Cone
Woofer Material
Pressed Paper (Water-Repellent)
Woofer Surround
Polyurethane
Midrange Design
---
Midrange Material
---
Tweeter Design
24mm Dome
Tweeter Material
PEI
Super Tweeter Design
---
Super Tweeter Material
---
Impedance (Ohms)
4
Weather-resistant
No
Grilles Included
No
Parts Warranty
2 Years
Labor Warranty
2 Years
Specifications
Sensitivity (1W at 1 meter)
94
Sensitivity at 2.83 volts
N/A
Frequency Response
50 - 23k Hz
Maximum RMS Wattage
80
Peak Power Handling (Watts)
180
Top-mount Depth (Inches)
2 1/4
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
5 1/16
Mounting Height (Inches)
0.384
Frame Width
6.256
Frame Length
6.256
HERTZ Dieci 3.5" 2-Way Coaxial Speaker - Pair (Dcx 87.3)
$134.99
Hertz DCX 87.3 coaxial speaker combines a woofer made of the highest performance materials with a neodymium tweeter featuring the exclusive PEI dome. Despite its compact size, the DCX 87.3 features an oversized magnetic group for ultimate control, still maintaining a compact size. For those who look for a high-performance two-way coax, the DCX 87.3 is able to ensure wide frequency response and excellent sound in any installation.
Component
Two way coaxial
Size mm (in.)
87 (3.4)
Power Handling - Continuous W
30
Power Handling - Peak W
60
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
130 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
60 x 24 x 8 (2.4 x 0.9 x 0.3)
Weight of one speaker kg (lb.)
0,31 (0.68)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
70
Re Ohm
3,1
Fs Hz
190
Vas I
0,7
Mms g
2,0
Cms mm/N
0,35
BL T*m
2,5
Qts
1
Qes
1,25
Qms
5,66
Spl dB
92
A
87 mm (3.4 in.
A3
120 mm (4.7 in.)
B
81 mm (3.2 in.)
C
45 mm (1.8 in.)
D
34 mm (1.3 in.)
HERTZ Dieci 6X9" 3-Way Coaxial Speaker - Pair (Dcx 690.3)
$174.99
Hertz DCX 690.3 Dieci series car audio coaxials use an oversized magnetic group, TPU (Thermoplastic polyurethane) surround, a 60 mm diameter midrange, and a PEI dome tweeter. The result is linearity, wide dispersion, and extra-ordinary efficiency not found in traditional coax components. An involving, emotional sound, even at high SPL levels. An authentic 3-way coax capable of reproducing a wide frequency spectrum.
Component
Three way coaxial
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
90
Power Handling - Peak W
180
Impedance Ohm
4
Depth mm (in.)
98 (3.9)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
45 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 40 x 15 (3.1 x 1.6 x 0.6)
Weight of one speaker kg (lb.)
0,95 (2.09)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
High density flux ferrite
D mm
170
Re Ohm
3,4
Fs Hz
66
Vas I
25,7
Mms g
16,5
Cms mm/N
0,35
BL T*m
3,9
Qts
1,12
Qes
1,55
Qms
4,06
Spl dB
93
A1
237 mm (9.3 in.)
A2
162 mm (6.4 in.)
B1
224 mm (8.8 in.)
B2
153 mm (6.0 in.)
C
98 mm (3.9 in.)
D
77 mm (3.0 in.)
HERTZ Dieci 5X7" 2-Way Coaxial Speaker - Pair (Dcx 570.3)
$174.99
Hertz DCX 570.3 car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level. This 2-way coax speaker is designed to satisfy specific installation and listening needs.
Component
Two way coaxial
Size mm (in.)
(5 x 7)
Power Handling - Continuous W
60
Power Handling - Peak W
120
Impedance Ohm
4
Depth mm (in.)
66 (2.6)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
60 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 40 x 15 (3.1 x 1.6 x 0.6)
Weight of one speaker kg (lb.)
0,76 (1.67)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
136
Re Ohm
3,3
Fs Hz
81
Vas I
10,7
Mms g
10,8
Cms mm/N
0,36
BL T*m
4,3
Qts
0,82
Qes
1,00
Qms
4,56
Spl dB
93
A1
220 mm (8.7 in.)
A2
141 mm (5.6 in.)
B1
182 mm (7.2 in.)
B2
127 mm (5 in.)
C
66 mm (2.6 in.)
D
59 mm (2.3 in.)
HERTZ Dieci 4X6" 2-Way Coaxial Speaker - Pair (Dcx 460.3)
$164.99
Hertz DCX 460.3car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. This 2-way coax speaker is designed to satisfy specific installation and listening needs. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level.
Component
Two way coaxial
Size mm (in.)
(4 x 6)
Power Handling - Continuous W
40
Power Handling - Peak W
80
Impedance Ohm
4
Depth mm (in.)
53 (2.1)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
65 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 32 x 10 (3.1 x 1.3 x 0.4)
Weight of one speaker kg (lb.)
0,58 (1.28)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
103
Re Ohm
3,3
Fs Hz
90
Vas I
6,2
Mms g
6
Cms mm/N
0,41
BL T*m
3,8
Qts
0,79
Qes
0,92
Qms
5,20
Spl dB
93
A1
155 mm (6.1 in.)
A2
97 mm (3.8 in.)
B1
146 mm (5.7 in.)
B2
89 mm (3.5 in.)
C
53 mm (2.1 in.)
D
45 mm (1.8 in.)
HERTZ 6.5"2 Way Coaxial Speaker 120W - DCX165.3
$142.99
Product info:
2-way car speakers (pair)
6-1/2" treated paper woofer with polyurethane surround
5/8" PEI dome tweeter
handles up to 60 watts RMS (120 watts peak power)
frequency range: 60-21,000 Hz
sensitivity: 93 dB
top-mount depth: 2-1/2"
grilles not included
warranty: 2 years
MFR # DCX 165.3
Item # 301DCX1653
Includes
Two 2-way Speakers
Eight 3/4" Screws
8 Speed clips
Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 20 Others)
Template on box
General
Speaker Size
6 1/2
Driver Design
2-way
Woofer Design
Cone
Woofer Material
Treated Paper (Water-Repellent)
Woofer Surround
Polyurethane
Midrange Design
---
Midrange Material
---
Tweeter Design
15mm Dome
Tweeter Material
PEI
Super Tweeter Design
---
Super Tweeter Material
---
Impedance (Ohms)
4
Weather-resistant
No
Grilles Included
No
Parts Warranty
2 Years
Labor Warranty
2 Years
Specifications
Sensitivity (1W at 1 meter)
93
Sensitivity at 2.83 volts
N/A
Frequency Response
60 - 21k Hz
Maximum RMS Wattage
60
Peak Power Handling (Watts)
120
Top-mount Depth (Inches)
2 9/16
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
5 9/16
Mounting Height (Inches)
0.242
Frame Width
6.48
Frame Length
6.48
HERTZ Dieci 5" 2-Way Coaxial Speaker - Pair (Dcx 130.3)
$134.99
To meet all installation needs, without giving up on Hertz quality and performance, The Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Component
Two way coaxial
Size mm (in.)
130 (5)
Power Handling - Continuous W
40
Power Handling - Peak W
80
Impedance Ohm
4
Frequency Response Hz
65 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
70 x 32 x 15 (2.7 x 1.3 x 0.6)
Weight of one speaker kg (lb.)
0,56 (1.23)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
112
Re Ohm
3,3
Fs Hz
82
Vas I
7
Mms g
7,4
Cms mm/N
0,51
BL T*m
3,8
Qts
0,76
Qes
0,93
Qms
4,3
Spl dB
93
A
130 mm (5.0 in.)
A3
151 mm (5.9 in.)
B
116 mm (4.6 in.)
C
59 mm (2.3 in.)
D
52 mm (2.0 in.)
HERTZ Dieci 4" 2-Way Coaxial Speaker - Pair (Dcx 100.3)
$134.99
To meet all installation needs, without giving up on Hertz quality and performance, Hertz DCX 100.3 car audio coaxial is designed with maniacal care to provide linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Component
Two way coaxial
Size mm (in.)
100 (4)
Power Handling - Continuous W
30
Power Handling - Peak W
60
Impedance Ohm
4
Frequency Response Hz
70 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
70 x 32 x 10 (2.7 x 1.3 x 0.4)
Weight of one speaker kg (lb.)
0,45 (0.99)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
85
Re Ohm
3,3
Fs Hz
115
Vas I
1,7
Mms g
5,0
Cms mm/N
0,38
BL T*m
3,5
Qts
0,79
Qes
0,96
Qms
4,33
Spl dB
92
A
99 mm (3.9 in.)
A3
129 mm (5.1 in.)
B
94 mm (3.7 in.)
C
50 mm (2.0 in.)
D
43 mm (1.7 in.)
HERTZ Cento 6X9" 3-Way Coaxial System 300W With Grilles -...
$314.99
The HERTZ CX690 is a high-performance 6×9-inch 2-way coaxial speaker engineered to deliver powerful, well-balanced sound even in challenging horizontal installations. Designed for car audio enthusiasts, it combines robust power handling, excellent sensitivity, and refined tonal accuracy for a premium in-car listening experience.
Featuring a semi-pressed paper-mica (SPP-M) elliptical cone, the CX690 achieves the ideal balance between lightness and damping, resulting in tight mid-bass and controlled response. A wide rubber suspension allows long excursion while minimizing distortion at high volumes.
High frequencies are handled with precision by a 40 mm Tetolon dome tweeter, supported by a neodymium magnet, ensuring smooth, distortion-free mid and high-range reproduction. The speaker’s high-density ferrite magnet and low-carbon polar plates reduce distortion under high power, while the rigid basket with metallic finish and rubber magnet cover suppresses unwanted vibrations.
Perfect for factory upgrades or custom car audio builds, the HERTZ CX690 delivers clarity, punch, and durability in a compact coaxial design.
Key Features
6×9" 2-Way Coaxial car speaker system
SPP-M (Semi-Pressed Paper-Mica) cone for balanced sound and durability
40 mm Tetolon dome tweeter for clear, detailed highs
Neodymium tweeter magnet for high efficiency
Wide rubber surround for extended excursion and damping
High-density ferrite magnet for reduced distortion at high power
Rigid basket with rubber magnet cover to minimize vibrations
Optimized for in-car audio systems
Technical Specifications
Specification
Details
Brand
HERTZ
Model Name
CX690
Series
690
Speaker Type
2-Way Coaxial
Woofer Size
6 × 9 in (230 × 150 mm)
Tweeter Size
40 mm (1.58 in)
Supertweeter Size
20 mm (0.8 in)
Cone Material
Semi-Pressed Paper-Mica (SPP-M)
Tweeter Dome
Tetolon
Tweeter Magnet
Neodymium
Impedance
4 Ω
Sensitivity
93.5 dB SPL
Frequency Response
40 Hz – 23 kHz
Power Handling (Continuous)
100 W
Power Handling (Peak)
300 W
Woofer Voice Coil
30 mm (1.2 in)
Tweeter Voice Coil
28 mm (1.1 in)
Connectivity
Coaxial (Wired)
Recommended Use
In-Car Audio Systems
Color
Black
Speaker Size
9 Inches
Weight
6.8 lbs (3.42 lbs per unit approx.)
Included Components
CX690 Speakers
Manufacturer
Hertz
GTIN
08018823126687
ASIN
B07JWDZYY1
HERTZ Cento 5X7" 2-Way Coaxial Speaker - Pair (Cx 570)
$259.99
Coaxial loudspeakers represent a major design challenge due to the critical nature of their acoustic output, being installed in an OEM placement often unfavorable to reproduction. For this reason, in order to achieve high performance, a great engineering effort was put into place, promptly addressed by our R&D team. The Cento two-way coaxials CX 570 features the new 24 mm (0.9 in.) Tetolon® dome tweeter that delivers a more musical and detailed sound compared to the more traditional plastic materials. The dispersion has been optimized for off-axis listening. The SPP-M cone (Semi Pressed Paper-Mica) ensuring superior acoustic and damping characteristics.
Component
Coaxials
Size mm (in.)
(5 x 7)
Power Handling - Continuous W
70
Power Handling - Peak W
210
Impedance Ohm
4
Frequency Response Hz
55 ÷ 22k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
13 x 2 (0.51 x 0.08)
Weight of one speaker kg (lb.)
1,0 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Semi-pressed paper + Mica
Dome
Tetolon
Xmech mm (in.)
4,9 (0.19)
D mm
139
Re Ohm
3,3
Fs Hz
70
Le mH
0,2
Vas I
11,1
Mms g
13
Cms mm/N
0,34
BL T*m
4,9
Qts
0,67
Qes
0,83
Qms
3,3
Spl dB
93,5
A
221 mm
8.7 in.
B
182 mm
7.17 in.
C
75 mm
2.95 in.
D
65,5 mm
2.58 in.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
