AUDISON Prima Line - Oem Component Speaker (Apbmw K4M)
$574.99
The two-way APBMW K4M kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
Technical Specs LF
Woofer Size
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Voice Coil Diameter
25 mm (0.98 in)
Magnet Size
50 x 29 x 3
Crossover Type
89 Crossover Type Hi-Pass: 6 KHz @ 6dB/Oct.
Crossover Level Adjustment
-3; 0
Technical Specs HF
Tweeter Size
29 mm (1.14 in)
Voice Coil Diameter
25 mm (0.98 in)
Electric-acoustic Specs LF
Re
3.3 Ohm
Fs
90 Hz
Mms
6.4 g
Cms
0.5
BL
4.8
Qms
8.9
Qts
0.48
Vas
1.8 l
Le
0.32 mH
Spl
88 dB
Xmax
0.5 mm (0.02 in)
Kit Tech Data
Cone Diameter
80 mm
General
Weight Woofer
0.426 kg
Weight Tweeter
0.06 kg
AUDISON Prima Line - Oem Component Speaker (Apbmw K4E)
$574.99
The two-way APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
Technical Specs LF
Woofer Size
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Frequency Response
90 ÷ 23k
Voice Coil Diameter
25 mm (0.98 in)
Magnet Size
50 x 29 x 3
Crossover Level Adjustment
-3; 0
Technical Specs HF
Tweeter Size
29 mm (1.14 in)
Voice Coil Diameter
25 mm (0.98 in)
Electric-acoustic Specs LF
Re
3.3 Ohm
Fs
90 Hz
Mms
6.3 g
Cms
0.5
BL
4.8
Qms
8.2
Qts
0.48
Vas
1.8 l
Le
0.32 mH
Spl
88 dB
Xmax
0.5 mm (0.02 in)
Kit Tech Data
Crossover Low-Pass
Hi-Pass: 6 KHz @ 6dB/Oct.
Cone Diameter
80 mm
General
Weight Woofer
0.46 kg
Weight Tweeter
0.06 kg
HERTZ Marine Bluetooth Media Receiver - Bluetooth (Hmr Bt)
$349.99
Thanks to the IP67 water resistance rating, the HMR BT Bluetooth® audio controller/receiver is ideal for small boat and Powersports applications. When connected directly to an amplifier, it can be used as a stand-alone source unit/receiver or it can provide Bluetooth® connectivity to any source unit with line-level inputs. The white LED backlit push-button controls are always well visible at any hour of the day. Ready to have some serious fun with the HMR BT Bluetooth® Audio Controller/Receiver?
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
marine digital media receiver
made for off-road and marine use
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
rear-panel amplifier output
cutout dimensions: 1.77"
warranty: 1 year
MFR # HMR BT
Item # 301HMRBT
Specification
FRONT PANEL IP RATING
IP67
LINE OUTS
1x Stereo RCAs (left and right)
FREQUENCY RESPONSE
20 Hz - 18 kHz (±1dB)
S/N Ratio @ 4Vrms (THD <1%)
93 dB (20 Hz - 20 kHz)
PREOUT VOLTAGE & IMPEDANCE
4V RMS / <100Ohm
REMOTE OUT
8V - 24V
OPERATING VOLTAGE
8V - 28V
Fuse
2A
OPERATING TEMPERATURE RANGE
-10°C - 50°C
Sources
BLUETOOTH®
5.0Audio streamingMax distance 10 m / 30 ft.
A2DP / AVRCP
Playback
Qualcomm® APTX low latency
CD quality streaming
REMOTE CONTROL
HMC U1
Size & Mounting
Mounting Hole diameter mm (in.)
Ø 45 (1.77)
Mounting Method
Panel mount (4 screws); U-Bracket
Physical Specs
A
73,2 - 2.9 (mm - in.)
A1
64,1 - 2.5 (mm - in.)
B
63,7 - 2.5 (mm - in.)
B1
27,7 - 1.09 (mm - in.)
C
39,1 - 1.54 (mm - in.)
D
16,7 - 0.66 (mm - in.)
E
55,8 - 2.2 (mm - in.)
HERTZ Marine Digital Media Receiver - Bluetooth, Usb, Aux, Am-Fm...
$1,049.99
HMR 50 advanced connectivity includes SiriusXM-Ready™, Bluetooth APTX (CD-Audio quality), USB 2.0 port (iPad/ iPhone control) to convert your deck in a real multimedia environment. The FM (RDS for EU)/AM PLL radio with Marine Weather Band completes the standard equipment.
Specification
DISPLAY
3.5” COLOR TFT IPS
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IP RATING
IP66
MULTI-ZONE
3 ZONES3x L+R (one per zone) (HPF: ALL, 60, 80, 100 Hz on ZONE1 only)
LINE OUT
2 (1 x L + R per zone)
SUBWOOFER OUT (RCA)
1x L+R (LPF: ALL, 60, 80, 100 Hz)
AUX INPUT (RCA)
1x L+R
EQUALIZER
CUSTOM 8 BANDS for each zone
EQ. PRESET
5
CAMERA IN
Yes
BATTERY VOLTAGE GAUGE
Yes
Sources
TUNER
AM/FM (RDS) (EU/US) Weather band
USB
Yes (2A)
IPOD/IPHONE
Yes
DAB+ READY
-
SIRIUSXM READY
Yes
NMEA 2000 READY
-
BLUETOOTH
5.0Audio streaming with ID3 Tag DisplayAPTX (CD AUDIO QUALITY)
REMOTE CONTROL
HMC D1 (up to 3) HMC U1 (up to 3)
Size & Mounting
Unit Size mm (in.)
W 146 (5.748) x H 105 (4.134) x D 121 (4.763)
Mounting Hole size mm (in.)
W 122 (4.8) x H 52 (2.05)
Mounting Depth mm (in.)
99 (3.89
Mounting Method
Panel mount (4 screws)
Physical Specs
A
146 - 5.75 (mm - in.)
B
105 - 4.13 (mm - in.)
C
98 - 3.86 (mm - in.)
D
34 - 1.34 (mm - in.)
E
50 - 1.97 (mm - in.)
HERTZ Marine Digital Media Receiver- Dab+ Ready*, Bluetooth, Usb, Aux,...
$689.99
HMR 20 turn every cruise in an exciting adventure bringing the music of your favorite artist to open water. The powerful (RDS)/ AM PLL radio and the extended connectivity powered by DAB+ Ready, Bluetooth audio streaming and USB 2.0 port will liven up your trip with tons of musical contents.
Specification
DISPLAY
3” COLOR TFT IPS
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IPX RATING
IP66
MULTI-ZONE
2
LINE OUT
2 (1 x L + R per zone)
SUBWOOFER OUT
1 (Low Pass 60-80-100 Hz)
AUX INPUT
1 x L + R
EQUALIZER
4 PRESET
CAMERA IN
-
BATTERY VOLTAGE GAUGE
Yes
Sources
TUNER
AM/FM with RDS (where available)
USB
Yes
IPOD/IPHONE
-
DAB+ READY
Yes
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
5.0Audio streaming with ID3 Tag Display
Physical Specs
Unit Size mm (in.)
W 146 (5.75) x H 105 (4.13) x D 132 (5.2)
Mounting Hole size mm (in.)
W 120 (4.72) x H 50 (1.97)
Mounting Depth mm (in.)
98 (3.86)
Mounting Method
Screw
HERTZ Marine Digital Media Receiver- Bluetooth, Usb, Aux, Am-Fm (Hmr...
$609.99
The new Hertz source features a minimalist square-shaped design, perfectly in line with the latest trends in the most prestigious navigation instruments. The centerpiece is a generous display with the large marine-grade pushbutton panel symmetrically distributed in the lower and upper parts. Thanks to Bluetooth® 5.0 you can stream high-quality audio from your favorite mobile device, maximizing open water fun!
Specification
DISPLAY
2.8” DOT Matrix display
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IP RATING
IP66
LINE OUTS
2x L+R (Front and Rear)
SUBWOOFER OUT (RCA)
1x L+R (LPF: 80, 120,160 Hz)
AUX INPUT (RCA)
1x L+R
EQUALIZER
BASS-TREBLE
EQ. PRESET
3
CAMERA IN
-
BATTERY VOLTAGE GAUGE
-
Sources
TUNER
AM/FM (EU/US)
USB
Yes (1A)
IPOD/IPHONE
-
DAB+ Ready
-
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
5.0Audio streaming
REMOTE CONTROL
HMC U1 (up to 3)
Size & Mounting
Unit Size mm (in.)
W 126 (4.960) x H 114 (4.488) x D 96.5 (3.799)
Mounting Hole size mm (in.)
Ø 89,5 (3.52)
Mounting Depth mm (in.)
72 (2.83)
Mounting Method
Panel mount (4 screws); U-Bracket
Physical Specs
A
126 - 4.96 (mm - in.)
A1
113 - 4.45 (mm - in.)
B
114 - 4.49 (mm - in.)
B1
63 - 2.48 (mm - in.)
C
70.8 - 2.79 (mm - in.)
D
25.7 - 1.01 (mm - in.)
E
89.5 - 3.52 (mm - in.)
HERTZ Marine Digital Media Receiver - Dab+, Bluetooth, Usb, Am-Fm...
$574.99
HMR 10 D features DAB + compatibility to listen to your favorite radio stations with unmatched audio quality. It is the perfect choice for boat enthusiast who want a great sound on board with a reduced gauge installation. With two pairs of high quality stereo outputs, a screen readable at all times and a generous marine-grade control panel, it will be a breeze to control your favorite playlist on USB or Bluetooth© streaming for maximum fun in water.
Specification
DISPLAY
2.8 DOT Matrix Display
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IPX RATING
IP66
MULTI-ZONE
-
LINE OUT
2 x L + R (FRONT + REAR)
SUBWOOFER OUT
-
AUX INPUT
1 X L + R
EQUALIZER
3 PRESET
CAMERA IN
-
BATTERY VOLTAGE GAUGE
-
Sources
TUNER
AM/FM with RDS (where available)
DAB+ READY
Yes
USB
Yes
IPOD/IPHONE
-
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
2.1Audio streaming
Physical Specs
Unit Size mm (in.)
Diameter 113 (4.45) D 96.5 (3.79)
Mounting Hole size mm (in.)
89.5 (3.52)
Mounting Depth mm (in.)
72 (2.83)
Mounting Method
U-bracket
HERTZ Marine Digital Media Receiver - Bluetooth, Usb, Am-Fm (Hmr...
$469.99
HMR 10 is ideal for boat enthusiast who want a great sound on board with a reduced gauge installation. With two pairs of high quality stereo outputs, a screen readable at all times and a generous marine-grade control panel, it will be a breeze to control your favorite playlist on USB or Bluetooth© streaming for maximum fun in water.
Specification
DISPLAY
2.8 DOT Matrix Display
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IPX RATING
IP66
MULTI-ZONE
-
LINE OUT
2 x L + R (FRONT + REAR)
SUBWOOFER OUT
-
AUX INPUT
1 X L + R
EQUALIZER
3 PRESET
CAMERA IN
-
BATTERY VOLTAGE GAUGE
-
Sources
TUNER
AM/FM with RDS (where available)
USB
Yes
IPOD/IPHONE
-
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
2.1Audio streaming
Physical Specs
Unit Size mm (in.)
Diameter 113 (4.45) D 96.5 (3.79)
Mounting Hole size mm (in.)
89.5 (3.52)
Mounting Depth mm (in.)
72 (2.83)
Mounting Method
U-bracket
HERTZ Marine Remote Control (Hmc U1)
$294.99
Play your favorite song and pump up the volume while swimming in open water. With IPX7 certification you can install HMC U1 remote control anywhere on the boat. Optional for CAPRI, HMR 50, HMR 20, HMR 18, HMR 18D, HMR 15, HMR 15 D, HMR 10 D, HMR 10, HMR BT.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 45 (1,77)
Mounting Method
U-Bracket
Physical Specs
mm
in
A
68
2.68
A1
70
2.76
B
58
2.28
C
29
1.13
D
18
0.70
E
46
1.83
HERTZ Marine Remote Control With Tft Display (Hmc D1)
$429.99
HMCD1 provides the ability to replicate every function of the HMR 50 main unit, creating up to 3 independently controlled listening areas.
Optional for HMR 50
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 75 (2.95)
Mounting Method
U-Bracket/Screw
Physical Specs
mm
in
A
146
5.75
B
105
4.13
C
12
0.47
D
34
1.34
E
80
3.15
G
50
1.97
H
133
4.98
HERTZ Dab+ Digital Radio Module For Hertz Marine Hmr 20...
$314.99
This module adds DAB+ DIGITAL RADIO capability to Hertz Marine Source. Provided with the dedicated antenna.
Optional for Capri and HMR 20
HERTZ Hertz Marine 6M Remote Controller Extension Cable (Hma C1306)
$119.99
13 pin remote controller extension cable 6 mt.
Optional for HMR 50.
HERTZ Hertz Marine Remote Controller Y-Splitter Cable (Hma C13Y)
$109.99
13 pin y cable.
Optional for HMR 50
HERTZ Hertz Marine 10M Remote Controller Extension Cable (Hma C1310)
$174.99
HMA C1310 extension cable is made to connect CAPRI HD1 to the CAPRI H100 main unit.
Optional for CAPRI - 10 mt.
HERTZ Marine Remote Control With Tft Ips Display (Capri Hd1)
$849.99
CAPRI HD1 allows to replicate every function of the main unit in every place of the boat you desire, maximizing the onboard comfort.
Optional for CAPRI.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 60 (2.95)
Mounting Method
Screw
Physical Specs
mm
in
A
178.5
7.02
A1
163
6.42
B
101
3.57
B1
84
3.31
C
18
0.71
D
31.30
1.23
E
59. 89
2.36
F
8
0.31
HERTZ Marine Digital Media Receiver - Bluetooth, Usb, Aux, Am-Fm,...
$1,799.99
ITALIAN SYMPHONY OF ELEGANCE AND HI-END AUDIO MASTERY
Introducing “Capri,” the epitome of elegance and sophistication in hi-end audio sources. Inspired by the breathtaking beauty and luxurious atmosphere of the namesake island, the Capri Hi-End Source is a true masterpiece that transcends ordinary audio experiences. With meticulous attention to detail and uncompromising craftsmanship, the Capri Hi-End Source by Hertz represents the pinnacle of audio engineering. Engineered to deliver superior sound quality and withstand the harsh marine environment, this top-of-the-line audio source is designed to elevate your boating experience to new heights. With a focus on high-resolution audio, CAPRI ensures that every note, every detail, and every nuance of your favorite music is reproduced with stunning clarity and fidelity, allowing you to immerse yourself in a true audiophile-grade experience on the water.
Specification
DISPLAY
4.3” COLOR TFT IPS
PEAK POWER @ 4 Ω
CLASS-D: 4 x 70 W
FRONT PANEL IP RATING
IP67
MULTI-ZONE
4
LINE OUT (RCA)
4x L+R (one per zone) - HPF: ALL, 60, 80, 100 Hz
SUBWOOFER OUT (RCA)
4x (LPF: ALL, 60, 80, 100 Hz)
AUX INPUT (RCA)
1x L+R
S/PDIF DIGITAL IN
Toslink (24 bit/96 kHz)
S/PDIF DIGITAL OUT
Coaxial (24 bit/96 kHz)
EQUALIZER
CUSTOM 8 BANDS for each zone
EQ. PRESET
8
CAMERA IN
Yes
BATTERY VOLTAGE GAUGE
Yes
Sources
TUNER
AM/FM (RDS) (EU/US) Weather band
USB
Yes (2A)
IPOD/IPHONE
Yes
DAB+
Ready
SIRIUSXM READY
Yes
BLUETOOTH
5.1Audio streaming with ID3 Tag DisplayLDAC – AAC – APTX HD
REMOTE CONTROL
HMC HD1 (up to 4 zones) HMC U1 (up to 2 zones)
Size & Mounting
Unit Size mm (in.)
W 146 (5.748) x H 105 (4.134) x D 121 (4.763)
Mounting Hole size mm (in.)
W 122 (4.8) x H 52 (2.05)
Mounting Depth mm (in.)
99 (3.89
Mounting Method
Panel mount (4 screws)
Physical Specs
A
178.5 - 7.023 (mm - in.)
B
101 - 3.57 (mm - in.)
C
104 - 4.09 (mm - in.)
D
31 - 1.22 (mm - in.)
E
60 - 2.36 (mm - in.)
HERTZ Digital Interface Processor (S8 Dsp)
$1,309.99
The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
General Specifications
POWER SUPPLY
Nominal Power supply voltage / fuse:
7 ÷ 20 VDC / 1A
Pulse operating voltage:
5 ÷ 24 VDC
Idling current:
0.34 A
OFF current (ART= OFF):
<80 uA
OFF current (ART= ON):
<80 uA
Remote IN
6 ÷ 20 VDC (10 mA)
Remote OUT
4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable):
1.5 ÷ 7 VDC
Input Stage
Analog low level Inputs
6 ch. (Differential input) (Molex microfit to RCAs)
Analog high level Inputs
6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator)
Digital inputs
Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA)
Input sensitivity (low level)
0.8V – 6V RMS
Input sensitivity (high level)
2.5V – 21V RMS
Analog inputs management
Audio input routing matrix type
Analog inputs eq
7 bands paragraphic for each input channel
ART
Automatic Remote Turn-On/Off with Speaker-In
Output Stage
Analog outputs (rca)
8 channels
Max output level (rms) @ 0.05% THD
4V
Analog outputs management
The DSP controls each output channel: gain, crossover, EQ, delay, polarity
Bandwidth
10Hz – 40KHz (+/-3db)
Signal to noise ratio (A weighted)
105dBA (Analog Input) 112dBA (Digital Input)
THD+N (@ 1Vrms out, @ 1Khz)
<0.005%
Crosstalk (channel separation) @ 1KHz
>95dBA
Digital Signal Processor
Sample rate
96KHz
Bit depth
24
Output equalizer
15 bands per channel w/ adjustable Q and Frequency
Equalizer resolution
1/10th dB per step +12dB / -12dB
Time alignment (distance)
0 ÷ 468.4 cm / 0 ÷ 184.4 inches
Time alignment (time)
0 ÷ 13.5ms
Time alignment (step)
0,08 ms; 2,8 cm / 1.1 inch
Time alignment (fine set)
0,02 ms; 0,7 cm / 0.27 inch
Crossovers
AP/HP/LP/BP all channels
Crossover type
Butterworth, Linkwitz-Riley, Bessel (All Channels)
Crossover slope
From 6dB/oct. until 30dB/oct. (6dB step)
Crossover steps
120 steps 20Hz-20KHz
Mute function
Each channel individually, or all channels.
Presets
4 presets
Presets selection
2 specific wires to control the 4 presets selection by extarnal switches.
Input selection by wire
One specific wire to select the desired input between Analog or Digital.
Audio signal compressor on output stage
Yes (enable/disable)
DSP chipset
Analog Device: ADAU1451
DSP management by bt app (iOS/ Android)
1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file.
Setup file sharing via bt
Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode.
DSP management by pc / mac / ios / android
Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Physical Specs
Max size W x H x D (mm/inch)
130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47
Weight (kg/lbs)
0,66 / 1.45
HERTZ 24V Marine 1740W 6 Channel Amplifier (Venezia V6 24V)
$2,149.99
Venezia V6 24V option is the first six-channel Hertz marine amplifier, featuring the impressive power of 160 W x 6 (4Ω), delivering the output levels needed in the marine environment! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability. Venezia V6 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V6 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
General Specs
Channels
6 - 5 - 4 - 3
POWER SUPPLY
Power supply voltage
22 ÷ 33 VDC
ldling current (power ON/OFF):
1 A / 0.04 mA
Consumption@ 1Ω, 28.8 VDC (Max Musical Power):
30 A
Remote In:
7 ÷ 33 VDC - 1 mA
Remote Out:
14÷ 33 VDC
AMPLIFIER STAGE
Distorsion - THD (100Hz @ 4Ω):
<0,06%
Bandwidth:
10 ÷ 42 kHz
S/N Ratlo (A welghted @ 1 V):
100 dB
Damping factor (100Hz @ 4Ω)
130
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10 kΩ
Load impedance (MIN)@6Ch:@5Ch:@4Ch:@3Ch:
2Ω2Ω + 2Ω + 2Ω +2Ω + 4Ω2Ω + 2Ω + 2Ω +4Ω + 4Ω4Ω
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 28.8 VDC, THD 1%
6Ch
160 W x 6 (4Ω)
6Ch
290 W x 6 (2Ω)
5Ch
160 x 4 (4Ω) + 580 x 1 (4Ω)
5Ch
290 x 4 (2Ω) + 580 x 1 (4Ω)
4Ch
160 x 2 (4Ω) + 580 x 2 (4Ω)
4Ch
290 x 2 (2Ω) + 580 x 2 (4Ω)
3Ch
580 x 3 (4Ω)
Total Power
1740 W
INPUTS / FILTERS
lnputs:
A Ch. Pre inB Ch. Pre inC Ch. Pre in
Pre Out:
No
Ch. A filters:
MONO IN (on/off)
Yes
By-pass
Yes
Hi-pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Ch. B filters:
MONO IN (on/off)
Yes
By-pass
Yes
Hi-pass:
50 ÷ 500 Hz @ 12 dB/Oct
Band-pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Ch. C filters:
MONO IN (on-off)
Yes
By-pass
Yes
Hi-pass:
50 ÷ 500 Hz @ 12 dB/Oct
Lo-pass:
50 ÷ 500 Hz @ 12 dB/Oct
Bass boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
330
13
B
300
11.18
C
200
7.87
D
170
6.7
E
54
2.12
kg
lb
Weight:
3.72
8.2
HERTZ 24V Marine 1010W 5 Channel Amplifier (Venezia V5C 24V)
$1,149.99
Venezia V5C 24V is the compact five-channel marine amplifier, featuring 80 W x 4 (4Ω) plus 330 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5C 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5C 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
General Specs
Channels
5 - 3
POWER SUPPLY
Power supply voltage
22 ÷ 33 VDC
ldling current (power ON/OFF):
1.7 A / 0.05 mA
Consumption@ 1Ω, 14.4 VDC (Max Musical Power):
47 A
Remote In:
7 ÷ 15 VDC - 1 mA
AMPLIFIER STAGE
Distorsion - THD (100Hz @ 4Ω):
<0,05%
Bandwidth:
10 ÷ 42 kHz
S/N Ratlo (A welghted @ 1 V):
100 dB
Damping factor (100Hz @ 4Ω)
>130
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10 kΩ
Load impedance (MIN)@5Ch:@3Ch:
2Ω4Ω + 4Ω + 2Ω
Weight (kg/lb):
3.72 / 8.2
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 28.8 VDC, THD 1%
5Ch
80 W x 4 (4Ω) + 330 x 1 (4Ω)
5Ch
115 W x 4 (2Ω) + 550 W x 1 (2Ω)
3Ch
230 W x 2 (4Ω) + 330 W x 1 (4Ω)
3Ch
230 W x 2 (4Ω) + 550 W x 1 (2Ω)
Total Power
1010 W
INPUTS / FILTERS
lnputs:
A Ch. Pre inB Ch. Pre inSub Ch. Pre in
Pre Out:
No
A Ch. filters:
Yes
By-Pass
Yes
Hi-Pass :
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
B Ch. filters:
By-pass:
Yes
Hi-Pass:
50 ÷ 500 Hz @ 12 dB/Oct
Band-Pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Sub Ch. filters:
By-pass:
No
Low-Pass:
50 ÷ 250 Hz @ 24 dB/Oct
Phase (adjust°):
(0 ÷ 180°)
Subsonic:
25 Hz @ 24 dB/Oct
Boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
270
10.6
B
240
9.44
C
185
7.2
D
155
6.1
E
54
2.12
kg
lb
Weight:
3.72
8.2
HERTZ Marine 1700W 5 Channel Amplifier (Venezia V5)
$1,574.99
Venezia V5 is the most-powerful five-channel Hertz marine amplifier ever, featuring 130 W x 4 (4Ω) plus 490 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting...
General Specs
Channels
5 - 3
POWER SUPPLY
Power supply voltage
9 ÷ 16 VDC
ldling current (power ON/OFF):
1.8 A / 0.04 mA
Consumption@ 1Ω, 14.4 VDC (Max Musical Power):
70 A
Remote In:
7 ÷ 15 VDC - 1 mA
AMPLIFIER STAGE
Distortion - THD (100Hz @ 4Ω):
<0,05%
Bandwidth:
10 ÷ 42 kHz
S/N Ratlo (A welghted @ 1 V):
102 dB
Damping factor (100Hz @ 4Ω)
130
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10 kΩ
Load impedance (MIN)@5Ch:@3Ch:
2Ω4Ω + 4Ω + 2Ω
Weight (kg/lb):
3.72 / 8.2
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%
5Ch
130 W x 4 (4Ω) + 490 x 1 (4Ω)
5Ch
220 W x 4 (2Ω) + 820 W x 1 (2Ω)
3Ch
440 W x 2 (4Ω) + 490 W x 1 (4Ω)
3Ch
440 W x 2 (4Ω) + 820 W x 1 (2Ω)
Total Power
1700 W
INPUTS / FILTERS
lnputs:
A Ch. Pre inB Ch. Pre inSub Ch. Pre in
Pre Out:
No
A Ch. filters:
Yes
By-Pass
Yes
Hi-Pass :
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
B Ch. filters:
By-pass:
Yes
Hi-Pass:
50 ÷ 500 Hz @ 12 dB/Oct
Band-Pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Sub Ch. filters:
By-pass:
No
Low-Pass:
50 ÷ 250 Hz @ 24 dB/Oct
Phase (adjust°):
(0 ÷ 180°)
Subsonic:
25 Hz @ 24 dB/Oct
Boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
330
13
B
300
11.8
C
200
7.87
D
170
6.7
E
54
2.12
kg
lb
Weight:
3.72
8.2
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
