All

The CPX 165 car audiocoaxial provides the thrill of listening to the Hertz sound even when the vehicle does not allow the installation of a two-way kit. The Tetolon dome tweeter and Neodymium magnet is provided with off-axis dispersion features and exceptional frequency extension for a detailed, airy sound. Radial Venting System technology ensures unparalleled cooling of the coil thanks to the eight holes at the base of the engine that allow air exchange with the tweeter support. This acts as a rear camera, sized for low Fs, to ensure a natural mid range and allow a low frequency crossover point with the woofer. The pressed-paper cone and the butyl rubber suspension offer an extended low frequency response and an impressive punch. The Mille-inspired design basket features a dampened and protective rubber coated magnet. The grille, available as optional, is made up of a durable high resistance ABS frame and metallic mesh protection. Component Coaxials Size mm (in.) 165 (6.5) Power Handling - Continuous W 95 Power Handling - Peak W 285 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 22k Woofer Magnet size D x d x h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12) Weight of one speaker kg (lb.) 1.13 (2.49) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-paper cone Dome Tetolon Xmech mm (in.) ±6,9 (0.27) D mm 131,5 Re Ohm 3,3 Fs Hz 60 Le mH 0,29 Vas I 11,8 Mms g 14,6 Cms mm/N 0,47 BL T*m 5,3 Qts 0,55 Qes 0,64 Qms 4,1 Spl dB 92 A 165 mm 6.5 in. B 141 mm 5.55 in. C 84,5 mm 3.33 in. D 65,5 mm 2.58 in. E 171 mm 6.73 in. F 24 mm 0.94 in.

The latest addition to the Cento PRO line is the CPK 690 system equipped with an elliptical woofer to avail of the 6 x 9 door placements, which are particularly common in the North American market, such as for the models of Toyota and FORD groups.Like the other speakers of the Cento PRO line, the woofer cone is made of pressed paper, the most suitable material to obtain a linear and controlled emission even when the woofer is driven with very high power.All electroacoustic parameters have been optimized to obtain maximum performance with door installations; we therefore find a magnetic group and voice coil improved for an excellent power handling and a lower resonance frequency.The large emission area of the CP 690 increases the woofer efficiency and extends the response down to 35 Hz. The crossover made with selected components, features a low-pass filter on the woofer with a 6 dB/oct. slope and12 dB/oct. on the tweeter with three levels of attenuation.CPK 690 is dedicated to the young enthusiast who wants a front row seat at their favourite concert while sitting comfortably behind the steering wheel. Component System Size mm (in.) (6 x 9) Power Handling - Continuous W 120 Power Handling - Peak W 360 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 30,5 (1.2) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92 Frequency Response Hz 35 ÷ 22,5k Crossover Cut off LP 6 dB / Oct. - HP 12 dB / Oct. Crossover Type 2 Way Weight of one component - Woofer 1,69 (3.73) Weight of one component - Tweeter kg (lb) 0,07 (0.15) Weight of one component - Crossover kg (lb) 0,2 (0.44) D mm 172 Re Ohm 3,2 Fs Hz 58 Le mH 0,33 Vas I 22,80 Mms g 25,3 Cms mm/N 0,30 BL T*m 6,9 Qts 0,48 Qes 0,62 Qms 2,2 Spl dB 92,5

Two-way systems Cento CK 130 features the new C 26 tweeter featuring a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity. Much time was invested in the research of the perfect material for the C 130 woofer cones: through a long process of customization of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions. The ultra compact CCX 2 crossover featuring tweeter emission level control (0, +3 dB) uses selected components for a full and engaging sound. The CG 100 grilles included in the Cento systems brighten up the car interior with their sophisticated design. Made of high resistance ABS with metal mesh, they offer a high degree of protection within a compact size, ideal for in-car installation.   Component System Size mm (in.) 130 (5) Power Handling - Continuous W 70 Power Handling - Peak W 210 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Sensitivity dB SPL 92,5 Frequency Response Hz 65 ÷ 22,5k Crossover Cut off 2,5 kHz @ 12 dB Oct. Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0,7 (1.54) Weight of one component - Tweeter kg (lb) 0,03 (0.07) Weight of one component - Crossover kg (lb) 0,185 (0.41) D mm 110 Re Ohm 3,1 Fs Hz 80 Le mH 0,17 Vas I 6,30 Mms g 8 Cms mm/N 0,50 BL T*m 4,1 Qts 0,61 Qes 0,72 Qms 3,9 Spl dB 92,5

C 26 tweeter features a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity.   Component Tweeter Size mm (in.) 26 (1) Power Handling - Peak W 120 Power Handling - Peak Note (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 20(0.8) Frequency Response Hz 1.8k ÷ 22.5k Magnet size D x d x h mm (in.) 19 x 0 x 3 (0.75 x 0 x 0.12) Weight of one speaker kg (lb.) 0,04 (0.08) Magnet Neodymium Dome Tetolon D mm 26 Re Ohm 3,7 Fs Hz 1500 Le mH 0,02 Vas I - Mms g 0,17 Cms mm/N 0,07 BL T*m 1,3 Qts 1,6 Qes 3,5 Qms 2,9 Spl dB 92 A 44 mm 1.73 in. B 38,5 mm 1.52 in. C 20 mm 0.79 in. D 9,1 mm 0,36 in.

The MPK 165P.3 car audio speakers system energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section. The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The MPK 165P.3 timbre balance is entrusted to the MPCX 2P.3 crossover featuring a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3 Ω requires high impulse currents. The tweeter MP 25.3 12dB/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.   Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 115 Power Handling - Peak W 230 Impedance Ohm 3 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 93 Frequency Response Hz 45 ÷ 22,5k Crossover Cut off 4 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.20 (2.65) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.17 (0.37) D mm 132 Re Ohm 2,6 Fs Hz 75 Le mH 0,28 Vas I 8 Mms g 15,1 Cms mm/N 0,3 BL T*m 5,45 Qts 0,56 Qes 0,63 Qms 5,2 Spl dB 94

The MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28 kHz, a record for a tweeter featuring a 28 mm voice coil. An elegant and compact angled tweeter support is provided with the system: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations. The crossover MPCX 165.3 creates the optimal tone balance between the MP 28.3 tweeter and MP 165P.3 woofer. It features bi-metallic capacitors with polyester dielectric, for maximum acoustic transparency and air wound inductors built on pure copper wire with up to 1mm diameter eliminating saturation. It also mounts wire-wound type resistors with low parasite inductance. The two positions Hi-Contour control provides the ability to fine tune the system frequency response optimizing it according to the different speakers positions. Most of all, the listeners can achieve their favourite sound thanks to the three-position control for the tweeter emission level with 2 dB steps (+2/0/-2dB) attenuation. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 125 Power Handling - Peak W 250 Impedance Ohm 3 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 93 Frequency Response Hz 45 ÷ 25k Crossover Cut off 3 kHz (Hi-Cont. = ON) , 4 kHz (Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Adjustment Tweeter-Level +2 / 0 / -2 dBHi-Contour ON/OFF Weight of one component - Woofer 1.20 (2.65) Weight of one component - Tweeter kg (lb) 0,075 (0.16) Weight of one component - Crossover kg (lb) 0,37 (0.82)

The MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 165.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 110 Power Handling - Peak W 220 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.07 (2.36) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 132 Re Ohm 3,1 Fs Hz 70 Le mH 0,3 Vas I 9,5 Mms g 14,9 Cms mm/N 0,36 BL T*m 5,5 Qts 0,58 Qes 0,67 Qms 4,6 Spl dB 93

The three way MPK 163.3 car audio speakers system is dedicated to those who want the best: the MP 70.3 midrange featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. The dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.

The MPK 130.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 130.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 130.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.. Component System Size mm (in.) 130 (5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 91 Frequency Response Hz 60 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0.95 (2.09) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 110 Re Ohm 3,1 Fs Hz 90 Le mH 0,25 Vas I 3 Mms g 10,5 Cms mm/N 0,24 BL T*m 5,3 Qts 0,64 Qes 0,74 Qms 5,1 Spl dB 92

The MPCX 2 TM.3 car audio crossover is specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven. Component Crossover Adjustment Tweeter   0 / +2 dB Weight of one component - Crossover kg (lb) 0,16 (0.35) Crossover Midrange   Low pass 5,5 kHz @ – 6 dB Oct.Tweeter      Hi pass 5,5k Hz @ – 12 dB Oct. Physical Specs G 102 mm 4.02 in. H 76,5 mm 3.01 in. I 37 mm 1.46 in.   Features 1. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.2. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.3. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.4. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.5. Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.

he Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 25k Crossover Cut off 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.29 (2.84) Weight of one component - Tweeter kg (lb) 0,1 (0.22) Weight of one component - Crossover kg (lb) 0,57 (1.26) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,24 Vas I 8,3 Mms g 17,5 Cms mm/N 0,3 BL T*m 7 Qts 0,47 Qes 0,52 Qms 5,3 Spl dB 93

The MLK 165.3 Legend car audio speakers system is composed of the ML 28.3 Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated crossover. The woofer originates from the ML 1650.3 Legend, inheriting all its technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp cone with cotton fibres, the six spoke aluminium basket with vented holes; however, it has been designed employing a high density ferrite magnet assembly, characterising its emission in the mid frequency range.  The ML 28.3 Legend tweeter mounts the same Neodymium magnet assembly as the ML 280.3 Legend’s and features all the optimizations made with FEA methods on the dome profile, and that it shares with its “older brother”, except for the most esoteric features such as the die-cast aluminium faceplate, the CNC machined body made from solid aluminium block and the copper short circuit ring.  Like MLCX 2 TW.3, also the MLCX 165.3 crossover features the “Hi-Contour” control to adjust the ML 28.3 tweeter cut-off frequency and so the cross-point with the ML 165.3 woofer, according to the position of the two speakers in the car. Through the tweeter three position level control, with 2 dB step attenuation, the level for a correct timbre balance can be fine-tuned according to one’s own tastes. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 91 Frequency Response Hz 40 ÷ 25k Crossover Cut off 3.5 kHz - 12 dB Oct Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1,65 (3.64) Weight of one component - Tweeter kg (lb) 0,075 (0.16) Weight of one component - Crossover kg (lb) 0,37 (0.82) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,37 Vas I 9 Mms g 17 Cms mm/N 0,3 BL T*m 6 Qts 0,57 Qes 0,64 Qms 5,4 Spl dB 92

component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers 5-1/4" treated paper woofer with polyurethane surround 15/16" PEI dome tweeter with external crossover handles up to 60 watts RMS (120 watts peak power) frequency range: 60-23,000 Hz sensitivity: 93 dB woofer mounting depth: 2-3/16" impedance: 4 ohms grilles not included warranty: 2 years MFR # DSK 130.3 Item # 301DSK1303 General Speaker Size 5 1/4 Driver Design 2-way Woofer Design Cone Woofer Material Pressed Paper (Water-Repellent) Woofer Surround Polyurethane Midrange Design --- Midrange Material --- Tweeter Design 24mm Dome Tweeter Material PEI Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included No Parts Warranty 2 Years Labor Warranty 2 Years Specifications Sensitivity (1W at 1 meter) 93 Sensitivity at 2.83 volts N/A Frequency Response 60 - 23k Hz Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 4 1/2 Mounting Height (Inches) 0.192 Frame Width 5.114 Frame Length 5.114

The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the “Center Tuning Duct” technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. The sophisticated design of the mobile group and suspensions of the CP 165 woofer, featuring a 60Hz calibrated resonance frequency, ensures a medium-low power with excellent punch, making listening to rich low frequency genres a unique experience. The basket is consistent with the family-feeling of the Mille line with the addition of damping and protective rubber. The cone material is inherited from the Mille Pro, as well as the suspension butyl rubber and the Tetolon fiber of the tweeter dome. These materials have excellent damping and lightness characteristics, producing a balanced sound without resonance peaks. The gift box includes the woofers grilles made of a combination of metallic mesh and high resistance ABS plastic frame. The combination of these two elements allows the user to customize the installation with a sophisticated and elegant design.  Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 105 Power Handling - Peak W 315 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92,5 Frequency Response Hz 45 ÷ 22,5k Crossover Cut off 2,8 kHz @ 12 dB Oct. Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.07 (2.36) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0,2 (0.44) D mm 131,5 Re Ohm 3,3 Fs Hz 60 Le mH 0,3 Vas I 11,5 Mms g 15,4 Cms mm/N 0,44 BL T*m 5,45 Qts 0,57 Qes 0,66 Qms 4,3 Spl dB 92,5

Two-way system Cento CK 165 features the new C 26 tweeter with a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil, delivering detailed and natural reproduction of medium-high frequencies. The R&D team optimized the C 26 dispersion characteristics to maximize performance at the listening point, ensuring a natural and progressive roll-off with excellent frequency linearity. Extensive research led to the selection of SPP-M (Semi Pressed Paper-Mica) for the C 165 woofer cone, preserving the natural sound of paper while enhancing rigidity through Mica powder. 165 mm (6.5 in.) | System | 285 W | 4 Ohm The result is an excellent balance between lightness and damping for powerful, controlled sound. The oversized ferrite magnet ensures superior control even at higher excursions. The ultra-compact CCX 2 crossover includes tweeter level control (0 / +3 dB) and uses selected components for a full and engaging sound. CG 165 grilles are included, made from high-resistance ABS with metal mesh, offering excellent protection and a refined in-car appearance. Technical Specs Component System Size mm (in.) 165 (6.5) Power Handling – Continuous W 95 Power Handling – Peak W 285 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Sensitivity dB SPL 93 Frequency Response Hz 55 – 22.5k Crossover Cut-off 2.5 kHz @ 12 dB/Oct Crossover Type 2-Way Passive Crossover Woofer Weight kg (lb) 0.96 (2.12) Tweeter Weight kg (lb) 0.03 (0.07) Crossover Weight kg (lb) 0.185 (0.41) Electro-Acoustic Specs D mm 131.5 Re Ohm 3.2 Fs Hz 60 Le mH 0.2 Vas l 13.24 Mms g 13.9 Cms mm/N 0.51 BL T·m 4.9 Qts 0.59 Qes 0.69 Qms 3.9 SPL dB 93   Accessories CPG 165 GRILE- Provided High resistance ABS metal finish grille and removable metallic mesh supplied   Technologies SPP-M (Semi Pressed Paper-Mica) cone enhanced with Mica powder for an excellent balance between lightness and damping.   Features C 26:  1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances. 2. Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range. 3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations. 4. Wide range of accessories, for easy integration in OEM placements. C 165:  1. 165 mm (6.5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper- Mica) enhanced with Mica powder for an excellent balance between lightness and damping. 2. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels. 3. 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high excursion and power handling. 4. Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations. 5. Provided elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh. CCX 2:  1. Tweeter level adjustment through a three-position switch (0, +3 dB) for an optimal tone balance that can be customized by the user. 2. Low-loss factor capacitors and low resistance inductances made with pure copper, for maximum sound transparency and clear high frequencies. 3. Compact design with metallic finish for an easy installation, with air vents for efficient heat dissipation.

Upgrade your vehicle's front channels and discover a whole new world of audio with the impressive IS MBZ 100 v2 kit. It showcases cutting-edge Flax cone midrange drivers and aluminium inverted dome tweeters. The advanced Focal technology ensures crystal-clear highs and superior spatialization, resulting in an unbelievably natural sound experience. The kit was specifically engineered to seamlessly replace the original system in the newest Mercedes-Benz models. Key points Developed in France Dedicated kit for latest-generation Mercedes-Benz vehicles Quick and easy installation, without any alterations Invisible integration in the passenger compartment Plug & Play manufacturer connectors dedicated to the vehicle   Specifications Product type : 2-way separate kit Loudspeakers :Midrange: 4" Membrane :Flax Coil diameter : 1'' Medium : 4" Filter : Woofer: Online / Tweeter box: Online Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 100 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 50 W RMS Sensitivity : 87 dB Surround material : Butyl

Made in France | Premium Plug & Play Upgrade Take your latest-generation Mercedes-Benz to a new level of audio performance with the Focal IC MBZ 100 V2. This high-fidelity 2-way coaxial speaker kit is part of the renowned Focal Inside range, designed specifically for seamless installation in compatible Mercedes models — with no modifications required. Crafted and engineered in France, the IC MBZ 100 V2 features Flax cone technology to deliver natural, detailed sound reproduction with warm midrange and precise highs. Powered by a neodymium motor, the compact design ensures enhanced efficiency and clarity, even in limited spaces. Key Features Developed and manufactured in France for superior build quality Plug & Play compatibility – quick, easy installation with OEM connectors Vehicle-specific design – perfectly fits late-model Mercedes-Benz vehicles High-performance Flax cone – delivers natural sound and dynamic response Compact neodymium motor – provides powerful output in a slim form factor ️ Invisible integration – blends seamlessly with your car’s interior Upgrade your factory system effortlessly with Focal’s IC MBZ 100 V2, and rediscover your favourite music with clarity, precision, and true French acoustic craftsmanship.   Specification Product type : 2-way coaxial kit Loudspeakers :Midrange: 4" Membrane :Flax Coil diameter : 1'' Medium : 4'' Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 80 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 40 W RMS Sensitivity : 88 dB Surround material : Butyl  

Bring powerful, precise bass to your Mercedes-Benz® with the ISUB MBZ 2 RHD V2 subwoofer kit from Focal. Designed specifically for right-hand drive vehicles, this Plug & Play solution delivers deep, controlled low-frequency response while maintaining seamless OEM integration. Engineered and developed in France, the ISUB MBZ 2 RHD V2 combines compact design with a high-performance neodymium motor to ensure outstanding dynamics without compromising space. Installation is fast and straightforward, requiring no vehicle modifications, and the result is a dramatic improvement in clarity, punch, and overall sound balance throughout your cabin. Key Points Right-hand drive dedicated design – Developed in France for perfect compatibility with Mercedes-Benz vehicles Powerful and controlled bass – Deep, impactful sound reproduction with impressive precision Plug & Play integration – Vehicle-specific connectors for a fast, clean installation No modifications required – Maintains factory look and integrity of your vehicle Compact neodymium motor – Delivers high performance in a small footprint Advanced protection – Ensures durability and reliability over time   Specifications Product type : right-hand drive subwoofers kit Loudspeakers :Subwoofer 8" Membrane :Polyglass Coil diameter : 1.38" Frequency response (+/- 3dB) :35Hz - 200Hz Impedance : 2 Ω Maximum power : 150 watts x2 Motor : Neodymium Nominal Impedance : 2 Ω Sensitivity : 93 dB Surround material : Butyl Design Depth behind surface (Mounting depth) : 99.5 mm Accessories Grilles : Included Plug & Play ISO cables supplied : Yes Grilles Yes

Performance Meets Precision in Compact Form The 3 KM is a specialised 3-inch (80 mm) mid-range driver built for serious car audio systems that demand clarity and fidelity in tight installation spaces. As part of the K2 Power M series, it brings Focal’s premium acoustic technologies into a compact format Key Features & Specifications Aramid fibre K2 sandwich cone with M-profile – improved frequency response, better dispersion and reduced depth Patented TMD® (Tuned Mass Damper) surround – lowered distortion and improved cone stability. Rigid aluminium non-magnetic frame – high mechanical integrity. Nominal power: ~60 W RMS, peak ~120 W (various sources). Sensitivity: ~89 dB (2.83 V/1 m) with 4 Ω impedance. Frequency response: approx. 200 Hz–9 kHz (as a dedicated mid-range driver). Mounting depth: approx. 27.3 mm / 1-1/8″. 4 Ω nominal impedance Why Use It? If you’re building a custom high-fidelity car audio system, the 3 KM allows precise mid-range reproduction with high accuracy. Its compact size makes it suitable for limited spaces while maintaining premium acoustic performance. The use of the “M” profile cone ensures better dispersion and reduced installation depth — ideal for demanding installs. Installation & System Considerations Because this is a dedicated mid-range driver, you’ll need appropriate crossover filters (often active crossovers) to ensure proper integration with tweeters and woofers. Its compact depth (~27 mm) allows for flush or near-flush mounting in constrained spaces. Should be paired with other components from the K2 Power M line to maintain tonal match and performance (e.g., 6.5 KM woofer, FRAK tweeter). Ensure your amplifier and system power levels align with the RMS/peak specs to avoid under- or over-driving. Summary The Focal 3 KM mid-range driver brings audiophile-grade mid-range clarity into a compact form, leveraging top-tier technologies like the K2 sandwich cone, TMD surround, and M-profile design. If you’re seeking to elevate your car audio build with precision and performance — this is a strong choice.   Sound Acoustics Product type : Medium Loudspeakers : Medium: 3.14″ Membrane : Aluminum/magnesium with “m” profile Suspension technology : Tuned Mass Damper Medium : 3″ Filter : Integrated Frequency response (+/- 3dB) : 200Hz – 9kHz Maximum power : 120 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 60 W RMS Sensivity : 89 dB Sound Electronics RMS power : 60 W RMS Design Product Depth: 27.3 Cut-Out diameter : 80 mm Weight : 200 g Accessories Supplied with screws and mounting brackets Grilles Available

Pure Dynamics. Unrivalled Precision. The Focal 6.5 KM 6½″ (165 mm) woofer from the K2 Power M Series brings uncompromising performance, combining raw power, absolute control, and musical precision.Built in Focal’s French workshops, this high-end driver is engineered for enthusiasts demanding the very best in clarity, tonal balance, and dynamic expression. Like all K2 Power M components, the 6.5 KM uses Focal’s iconic aramid fibre K2 sandwich cone, enhanced with the exclusive ‘M’-profile geometry for superior dispersion and reduced mounting depth. The result is an ultra-compact, high-efficiency driver that delivers authentic, full-bodied sound in virtually any installation. K2 Technology – Precision That Performs The K2 cone is a Focal signature: an aramid-fibre composite built for unmatched rigidity and low mass.By adding the ‘M’-profile, Focal’s engineers have refined frequency response and dispersion while minimising distortion — giving your music a tighter, faster, and more accurate attack. Every detail of the 6.5 KM is designed to serve one purpose: pure, high-fidelity energy that feels as alive as it sounds. Patented TMD® Surround – Zero Distortion Originally developed for Focal’s Sopra home hi-fi series, the TMD® (Tuned Mass Damper) surround eliminates unwanted cone resonances and mechanical colouration.By stabilising the surround and suppressing deformation, the 6.5 KM achieves ultra-clean midrange detail with extraordinary linearity — even at high volumes. Progressive Spider – Dynamic Control Focal’s progressive-profile spider enhances cone control and damping, allowing for greater excursion without losing composure.This advanced suspension system ensures impeccable dynamics, transient precision, and bass authority across the entire frequency range. Modular Freedom – Your System, Your Way The K2 Power M range is designed “à la carte”, giving installers and enthusiasts the flexibility to build a truly bespoke system.Pair the 6.5 KM with the 3 KM midrange and FRAK tweeter to create an extraordinary 3-way configuration, or run it as a dedicated mid-bass driver for uncompromising accuracy. Key Features Made in France – designed and built in Focal’s acoustic labs 6½″ (165 mm) woofer – premium K2 Power M mid-bass driver Aramid fibre K2 sandwich cone – ultra-rigid, lightweight, dynamic ‘M’-profile cone – superior dispersion and reduced mounting depth Patented TMD® surround – eliminates resonance and distortion Progressive spider – improved damping and linearity Aluminium chassis – rigid, non-magnetic structure for high excursion Compact form factor – ideal for tight factory locations or custom installs Bespoke system ready – integrate seamlessly with 3 KM and FRAK drivers The K2 Legacy Lives On The Focal 6.5 KM continues the K2 Power legacy — engineering mastery, handcrafted precision, and sound that moves you.Every detail is tuned for realism, delivering the emotion, energy, and excellence that define Focal’s performance heritage. Focal 6.5 KM – Dynamic Power. Absolute Fidelity.   Sound Acoustics Product type : Woofer Loudspeakers : Woofer: 6.5″ Membrane : K2 Power Suspension technology : Tuned Mass Damper Filter : Integrated Frequency response (+/- 3dB) : 50Hz – 5kHz Maximum power : 240 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 120 W RMS Sensivity : 92.5 dB Sound Electronics RMS power : 120 W RMS Design Product Depth: 54 mm Cut-Out diameter : 165 mm Weight : 1950 g Grilles Available

IS BMW 100KL is a 2-way component kit designed for BMW drivers looking to upgrade their factory audio system with a high-fidelity solution tailored to their vehicle. It features Focal’s iconic K2 Sandwich cone, which offers an ideal balance of weight, rigidity, and damping — delivering powerful, dynamic sound reproduction. The kit also includes TKM inverted dome “M” tweeters, capable of reproducing high frequencies up to 22 kHz, ensuring exceptional precision and smoothness in the treble range. A premium solution for an immersive and detailed in-car listening experience. Specifications Product type : 2-way separate kit Loudspeakers :Woofer / Midrange / Subwoofer: 3.94" Membrane :Kevlar sandwich Tweeter :100mm Filter : Separated Frequency response (+/- 3dB) :80Hz - 22kHz Impedance : 4 Ω Maximum power : 80 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 40 W RMS Sensitivity : 84 dB Surround material : Butyl   Sound Electronics RMS power : 60 W RMS Design Depth behind surface (Mounting depth) : 41 mm Accessories Supplied with screws and mounting brackets : Yes Grilles No

Specially designed for Model 3 and Model Y from the manufacturer Tesla®, the IC T3Y 100 coaxial kit is a reference hi-fi solution that can be integrated quickly and easily and does not require modification within the vehicle. The speakers are equipped with the Flax sandwich membrane, made of linen fiber and manufactured in France. This exclusive Focal technology delivers pure, natural and ultra-realistic sound. The aluminum inverted dome tweeter allows faithful reproduction of high frequencies, while offering improved sound spatialization. And for even greater performance in a limited depth space, the IC T3Y 100 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system   Specifications Product type : 2-way coaxial kit Loudspeakers :Medium: 4" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 80 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 40 W RMS Sensitivity : 88 dB Surround material : Butyl

Specially designed for Model 3 and Model Y vehicles from the manufacturer Tesla®, the IW T3Y 200 woofers are aimed at drivers wishing to replace their original audio system with a hi-fi solution from Focal and perfectly suited to their vehicle. Integrating quickly and easily, IW T3Y 200 significantly improves the in-car listening experience. Designed and manufactured in France, the speakers are equipped with a Flax sandwich membrane in flax fiber. Recognized for its performance, this Focal technology contributes to the reproduction of pure, natural and ultra-realistic sound. And for even greater sound performance in vehicles, the IW T3Y 200 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system Specifications Product type : Kit 2 Woofers Loudspeakers :Woofer: 8" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :40Hz - 1500Hz Maximum power : 150 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 75 W RMS Sensitivity : 91 dB Surround material : Butyl

An exclusive Focal innovation, the FRAK tweeter is a revolution in Car Audio with its unique power handling (600 Hz - 32 kHz). Its Aluminum/Magnesium cone with “M” profile brings unprecedented dynamics to your installation. Perfection of the treble and great clarity of the midrange combine for very high-end listening. Specifications Product type : Tweeter Loudspeakers :Tweeter: 1.25 Membrane :Aluminum/magnesium with "m" profile Surround technology : Tuned Mass Damper Coil diameter : 1.25" Filter : Integrated Frequency response (+/- 3dB) :600Hz - 32kHz Maximum power : 150 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 25 W RMS Sensitivity : 91 dB

Specially designed for Model 3 and Model Y vehicles from the manufacturer Tesla®, the IS T3Y 100 2-way exploded kit is aimed at drivers wishing to replace their original audio system with a hi-fi solution from Focal. It is integrated quickly and easily, without any modifications having to be made within the vehicle. IS T3Y 100 consists of Flax sandwich membrane speakers, made of linen fiber and manufactured in France. Recognized for its high quality, this Focal technology is the source of pure, natural and ultra-realistic sound. Another exclusive Focal innovation, the aluminum inverted dome tweeter allows faithful reproduction of highs, while offering sound spatialization optimized for confined spaces. And for even greater sound performance in vehicles, the IS T3Y 100 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system Specifications Product type : 2-way separate kit Loudspeakers :Medium: 4" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 100 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 50 W RMS Sensitivity : 87 dB Surround material : Butyl

Intended for Tesla® Model 3 and Model Y vehicles, the ICC T3Y 100 central channel kit is designed for drivers wishing to replace their original audio system with a tailor-made hi-fi solution from Focal. Integrating quickly and easily, the installation of ICC T3Y 100 does not require any modification within the passenger compartment. This central channel is made up of a speaker equipped with the Flax sandwich membrane, made of linen fiber and manufactured in France. Recognized for its high quality, this Focal technology is the source of pure, natural and ultra-realistic sound. Another exclusive Focal innovation, the aluminum inverted dome tweeter allows faithful reproduction of highs, while offering sound spatialization optimized for confined spaces. And for even greater sound performance in vehicles, the ICC T3Y 100 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system   Specifications Product type : Central Way Kit Loudspeakers :Medium: 4" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 100 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 50 W RMS Sensitivity : 87 dB Surround material : Butyl

Our BMW Plug & Play offering is complemented by two premium kits: IS BMW 100K and IS BMW 100KL. They utilize our iconic aramid fibre K2 cone which permits the best balance between weight, rigidity and damping. It provides power and depth to each listening experience. The ‘M’ profile inverted dome TKM tweeter can reproduce high frequencies up to 22 kHz, for more precise and soft trebles. Woofer Depth:  1⅜” (36mm) Key points Developed and manufactured in France Do it yourself quick installation Seamless integration into the cabin High quality soundstage Dedicated manufacturer Plug & Play connector Installation video tutorial (available)

Tough Dog Airbags are engineered to handle the harshest conditions worldwide. Air Assist suspension helps level and control rear ride height for vehicles with varying loads. High-pressure polyurethane inserts are tough, durable, and backed by Tough Dog’s unlimited km, 3-year warranty. Key Features Suitable for coil spring vehicles Heavy duty high density polyurethane construction 5-60psi capacity (most applications) Laser cut & powdercoated brackets Zinc plated roll plates top & bottom No drill fitting (most applications) Eliminates sway & body roll Guards against excessive compression when loaded Warranty 4-Year / Unlimited KM Recreational Warranty (conditions apply) 3-Year / Unlimited KM Commercial Warranty (conditions apply)   Delivery Information We ship Australia-wide via trusted courier partners. Orders are dispatched same-day from our Sydney warehouse. Metro or regional, expect fast, reliable delivery to get your vehicle upgraded without delay.

MSA Toyota Powerfold Towing Mirror Extension Infill With Camera Provision- TMA150 SUITS: ALL MSA Power Fold™ Towing Mirror Models Quick & Easy Fitment! The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles. MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.   Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles. The mirror is the subject of Chinese utility model No. 201721652844.X and international patent application No. PCT/AU2017/051320, as well as corresponding patents and patent applications in Australia, Belgium, Canada, China, France, Germany, the Netherlands, New Zealand, South Africa, Spain, the United Kingdom and the United States of America. The mirror is also the subject of international patent application No. PCT/AU2020/050810, as well as corresponding patents and patent applications in Australia, Canada, China, Europe, New Zealand, South Africa and the United States of America. The shape of the mirror is protected by Australian design registration No. 201715134 and Chinese design registration No. 201830077185.5.

Nissan Navara Np300 2015-11/2020 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM1453 Suits Nissan Navara Np300 2015-11/2020 Colour Chrome Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Nissan Navara Np300 2015-11/2020 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM1453 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Nissan Navara Np300 2015-11/2020 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM1452 Suits Nissan Navara Np300 2015-11/2020 Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Nissan Navara Np300 2015-11/2020 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM1452 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Lc150 Prado 2009-07/2024 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM555 Suits Lc150 Prado 2009-07/2024 Colour Chrome Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Heated – Heated mirror glass to demist in cold or wet conditions Bsm Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Lc150 Prado 2009-07/2024 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM555 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

300 Series Vx-Sahara,Sahara Zx - Gr Sport 01/2025 - Curr Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM2257 Suits 300 Series Vx-Sahara,Sahara Zx - Gr Sport 01/2025 - Curr Colour Chrome Type Non Power Fold Key Features Elec Ind Heat – Heated mirror glass to demist in cold or wet conditions Bsm Camera Memory – Memory function recalls your preferred mirror position Puddle Light – Puddle lights illuminate the ground when entering or exiting Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: 300 Series Vx-Sahara,Sahara Zx - Gr Sport 01/2025 - Curr Colour: Chrome Adjustment: Manual Sold As: Pair (left and right mirrors) Product Code: TM2257 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Sony's Elevated Standard subwoofer amp Sony's Mobile ES Series XM-1ES Elevated Standard mono subwoofer amplifier will boost the level of your bass while retaining its pristine, crisp, and low-frequency sound and impact. Capable of dishing out large amounts of power, this amp will help make it sound like you're right there with the drummer and bass player in the studio or on stage. With up to 1,000 watts RMS output, there'll be plenty of volume available for playing your sub the way you want. Signal handling The amplifier features adjustable low-pass and subsonic filters, so you can fine-tune the sound to fit almost any size and style of subwoofer. A remote control knob is included so you can dial in just the right amount of bass. Preamp outputs let you easily add another stereo or mono amp to your system. The amp comes with a wired remote bass knob   Product highlights: mono subwoofer amplifier 600 watts RMS x 1 at 4 ohms 1,000 watts RMS x 1 at 2 ohms CTA-2006 compliant Class D amp technology — frequency response: 10-500 Hz variable low-pass filter (50-500 Hz, 24 dB/octave) variable subsonic filter (5-50 Hz, 24 dB/octave) wired remote level control included More Info: resonance-damping aluminum chassis gold plated connectors preamp inputs and outputs speaker-level inputs (handle up to 16V) wiring and hardware not included with amplifier 4-gauge power and ground leads recommended fuse rating: 25A x 4 dimensions: 10-5/8"W x 2-3/8"H x 8-1/2"D warranty: 3 years MFR # XM1ES Item # 158XM1ES What's in the box: Mono subwoofer amplifier Wired remote control (18' Cable attached) Four 25-amp ATO fuses (installed) 2.5mm Allen wrench Remote mounting bracket Adhesive backed pad Four 3/4" Screws Two 1/2" Screws Two 1/4" Screws Operating instructions Warranty information

Sony has a worldwide reputation for making great audio easy to access. So it's always exciting when they decide to make a product that's focused on premium car audio, like their flagship XS-690ES 6"x9" speakers. I carved out some time to experience their Mobile ES Series for myself at Crutchfield HQ's Car Audio Listening Lab. Using Hi-res Audio streaming service Qobuz, I listened to some of my favorite albums from female vocalists like Bonnie Raitt and Kate Bush, soundscapes from Daft Punk, and hip-hop from MF DOOM. It's no exaggeration to say that with every track, I heard texture and detail I'd never heard before. All of those small revelations added up to a bigger, deeper feeling — I felt closer to the music... I felt like I was "there." If you're hungering for an audiophile-grade experience in the car, these Hi-res Audio-compatible speakers from Sony are a wonderful way to start. Specialized woofer Sony builds the woofer cones of these 6"x9" 2-way speakers from a specialized, mica-reinforced cellular aramid fiber. Developed in-house, this lightweight, rigid material minimizes distortion and enhances overall low-frequency response. Sony's unique, notch-edge surround helps with responsiveness and shrugging off wear and tear over the life of the speaker Audiophile tweeter The speaker's synthetic fabric dome tweeter delivers frequencies up to 40,000 Hz that, even though they are above the range of human hearing, reveal more texture and detail in your high-resolution audio files and add more realism and atmosphere to instruments and vocals. The sum of its parts Sony's meticulous approach to stamping out distortion wherever it might lurk continues with nearly every other facet of this speaker. The structure of its five-beam frame helps the dispersion of unwanted resonance and the speaker's integrated dynamic air diffuser promotes essential cooling when the going gets hot. That means you can feed the Mobile ES Series speakers plenty of power from an aftermarket amp and always count on immersive, natural sound. Product highlights: 6"x9" 2-way car speakers (pair) Mica Reinforced Cellular aramid fiber woofer 1" synthetic fiber dome tweeter handles up to 110 watts RMS (330 watts peak power) frequency response: 35-40,000 Hz sensitivity: 90 dB warranty: 3 years MFR # XS690ES Item # 158XS690ES What's in the box: Two 2-way speakers 2 Grilles Eight 1-1/8" Screws Installation instructions (English/ French/ Spanish/ German/ Italian/ 20 other languages) Warranty information Template on the box

Mobile ES quality with a beautiful touchscreen One look at Sony's flagship XAV-9500ES digital multimedia receiver, and I was cooking up ways to make it part of my daily drive. My car's factory radio can't be replaced, but... maybe it's time for a new car? Okay, okay... buying a car just to add a new radio might be taking things too far, but there's no denying this stereo churns up serious fanboy energy within me. Doubtless, it'll do the same for other Sony fans. The Mobile ES Series is legendary in the industry for its commitment to sound quality, and Sony has incorporated that pedigree into a high-performance stereo with a 10.1" touchscreen and onboard Apple CarPlay® and Android Auto™. Not your average touchscreen Sony designed this digital multimedia receiver with tablet users in mind, providing a super-sized HD capacitive display that doesn't disappoint. Unlike most displays, the LCD is bonded directly to the protective glass touch layer with a transparent adhesive, so you'll get a precise touch experience as well as enhanced contrast and visual performance. Check your dash! Important Note — The screen measures 10.635" x 6.695". Before ordering, check for possible interference with your dash, your shifter, and all other controls. Fits more dashes The XAV-9500ES comes in two main pieces: a 2" tall chassis and a 10.1" touchscreen. The chassis fits in most single-DIN dash openings, so it'll work great in many older vehicles. When you mount the chassis in your dash opening, the screen offers four-way adjustability you can get a perfect view and not block essential climate controls. Play your High-Res music... wirelessly! Sony uses a premium digital audio converter (DAC) chip to elevate sound quality across the board. With high-performance 32-bit processing and eliminated timing jitter, you'll hear an impressive dynamic range with minimal distortion. Audiophile-grade capacitors step up the power for satisfying bass performance and a dual-layer chassis helps eliminate electro-magnetic interference for an even cleaner audio signal. Use the rear USB Type-C input to connect your smartphone or thumb drive with High-Resolution audio files to hear music as your favorite artists intended. Sony also builds in LDAC technology which allows you to wirelessly stream audio from compatible devices at 96 kHz / 24-bit sampling, which is a significant improvement over conventional Bluetooth streaming. Superior tools for sculpting your sound Sony builds in an impressive array of tools that are hard to find in most stereos. A 192-kHz / 24-bit DSP offers excellent sound processing and precision time alignment. A 14-band EQ gives you control over the 6 output channels, and each channel also sports an 8-band parametric EQ. Combined with a 3-zone crossover, you'll have everything you need to pull together the fine-tuning of your front speakers, rears, and subs. The XAV-9500ES also includes three pairs of 5-volt RCA preamp outputs that provide an ultra-clean signal when you add amps to your system. Smartphone fun, without wires Without exceptional smartphone integration, a new car stereo just isn't as exciting or useful. Thankfully, Sony includes the very best in the XAV-9500ES, with onboard Android Auto and Apple CarPlay that you can access with a wireless connection. Android Auto (wired and wireless): Android Auto integrates the Android platform into your driving experience in a non-distracting way. You'll have voice control access to Google Maps, weather, music, your phone, text messages, plus easy access to many of your favorite apps. Get more info at www.android.com/auto. Apple CarPlay (wired and wireless): CarPlay integrates your iPhone® into the driving experience, putting iPhone content at the driver's voice command with minimal distraction. That means easy access to your music library, your phone, messages, navigation, and many third-party streaming music apps, too. Learn more at www.apple.com/ios/carplay. Note: Sony offers a firmware update to support wired CarPlay operation. See details at sony.com. Built-in Bluetooth® and more Of course, Sony gives you Bluetooth® as well. Use it to make or receive hands-free phone calls via your smartphone with the included microphone, or stream music from your phone with ease. You can also use the included microphone to activate voice commands for Apple CarPlay and Android Auto. If you're hankering for even more entertainment, step up to satellite radio programming by adding a SiriusXM tuner. iDatalink Maestro lets you keep your factory extras The XAV-9500ES offers compatibility with a growing number of aftermarket radios, thanks to iDatalink's Maestro modules (not included). In a wide selection of vehicles, the Maestro ADS-MRR module lets you keep factory features that you'd otherwise lose when you install a new radio. You'll also be able to check out engine performance data and other vehicle info on the screen. iDatalink also now offers the Maestro ADS-MRR2 module, which adds features like programmable outputs for add-on accessory items, such as lighting and winch accessories, as well as built-in Bluetooth for future wireless software updates for the module. Once you've identified your vehicle, you'll see the compatible iDatalink ADS-MRR modules offered on the way to the Shopping Cart. General features: digital multimedia receiver with AM/FM tuner (does not play CDs) 10.1" capacitive HD anti-glare touchscreen with four-way adjustable mount fits single-DIN dash openings optional remote control (sold separately — not available at Crutchfield) Bluetooth hands-free calling and audio streaming High-Resolution audio and High-Resolution wireless LDAC audio support built-in ESS digital-to-analog converter built-in high-grade 192-kHz / 24-bit digital signal processor Smartphone features (see Details for info on compatibility with specific smartphones and apps): wired/wireless Apple CarPlay and wired/wireless Android Auto compatible wired CarPlay may require software update Audio/video features: plays MP3, WMA, WAV, AAC, FLAC, ALAC, DSF, and DSDIFF music files plays ASF, WMV, AVI, MKV, MPEG-4 video files via USB 14-band graphic equalizer with independent 8-band parametric EQ per channel 3-zone crossover Expandability: compatible with SiriusXM's aftermarket satellite radio tuner (sold separately, subscription required) inputs: rear USB Type-C port, backup cam input, two additional camera inputs outputs: 6-channel preamp outputs (5-volt front, rear, sub) Other information: Important Note — Monitor dimensions are 10.635" x 6.695". Before ordering, check for possible interference with your dash. wired connection to parking brake required to access settings and other features on this receiver (the brake must be connected and set for video display) built-in internal amp (20 watts RMS CTA-2006/55 peak x 4 channels) compatible with most factory steering wheel audio controls (adapter required) works with iDataLink Maestro module displays engine performance and other vehicle data on touchscreen retains factory features in a wide selection of vehicles warranty: 3 years MFR # XAV9500ES Item # 158XAV9500   What's in the box: Sony XAV-9500ES owner's manual Single-DIN source unit (10A fuse) 10.1" Touchscreen monitor Wiring harness (attached 6.5' parking brake wire) Camera/Preout harness 3-Wire to 3.5mm SWC adapter 59" USB-C extension cable GPS antenna (attached 10' cable terminated by a FAKRA connector) GPS Antenna mounting plate Microphone with visor-bracket (attached 12' cable terminated by a right-angle mono-3.5mm connector) Surface bracket Two-sided tape Four M5x9mm ISO-screws Four M4x6mm machine screws M3x8mm machine screw Connector bracket 2 Rear-panel covers Operating Instructions Warranty Information Installation Note

Lovells SSM GVM Upgrade Suspension kits have been designed to improve the useable payload of your 4x4. With a bunch of 4wd Accessories, two or three adults along with the tow ball load of a caravan your payload is very quickly consumed. Load carrying and performance can be compromised if you are not taking your suspension seriously. With a Lovells GVM Suspension upgrade you are in safe hands knowing these kits are fully track tested and certified by an automotive engineer. These kits provide a solution for consumers of most common 4x4 vehicles who need to carry loads that exceed the factory GVM. When upgrading your GVM you should also consider upgrading your engine cooling system as the added load on your vehicle will mean your engine has to work harder. Lovells Radiator upgrades have been designed to factory fitment specifications and provide up to 30% more cooling efficiency over a factory radiator. Contact your nearest TJM approved Lovells installer for more information.  GVM Upgrade: 3695KG ADR: Complete Lovells Online application Approval: State (Post Registration) or Federal (Pre Registration) VIN Number: Required for application Lovells Kit Part Number: ISUZKIT009-GVM-C-PLAT Lovells Heavy Duty Coil Spring: IFS-002 Lovells Heavy Duty Leaf Spring IS-003EHD 2.0" Mono Tube, Adjustable Remote Reservoir Long Travel Gas Shock Absorber: 64611038LH/RH-2.0ADJMONO 2.0" Mono Tube, Adjustable Remote Reservoir Long Travel Gas Shock Absorber: 6462258B-2.0ADJMONO Package Weight: 122.00 kg   Compatible Vehicles  ISUZU D-MAX RG 08/20-04/24 2Dr Cab Chassis Hi Rider  ISUZU D-MAX RG 08/20-04/24 Space C/Chas & Pick Up  ISUZU D-MAX RG 08/20-04/24 4Dr C/Chas & Pick Up  ISUZU D-MAX RG 05/24-On SX 2Dr Cab Chassis  ISUZU D-MAX RG 05/24-On SX Space Cab Cab Chassis  ISUZU D-MAX RG 05/24-On LS-U Space Cab Pick Up  ISUZU D-MAX RG 05/24-On SX 4Dr Cab Chassis & Pick Up  ISUZU D-MAX RG 05/24-On LS-M 4Dr Cab Chassis & Pick Up  ISUZU D-MAX RG 05/24-On LS-U 4Dr Cab Chassis & Pick Up  ISUZU D-MAX RG 05/24-On LS-U+ 4Dr Pick Up  ISUZU D-MAX RG 05/24-On X-Terrain 4Dr Pick Up

Lovells GVM Upgrade Suspension kits have been designed to improve the useable payload of your 4x4. With a bunch of 4wd Accessories, two or three adults along with the tow ball load of a caravan your payload is very quickly consumed. Load carrying and performance can be compromised if you are not taking your suspension seriously. With a Lovells GVM Suspension upgrade you are in safe hands knowing these kits are fully track tested and certified by an automotive engineer. These kits provide a solution for consumers of most common 4x4 vehicles who need to carry loads that exceed the factory GVM. When upgrading your GVM you should also consider upgrading your engine cooling system as the added load on your vehicle will mean your engine has to work harder. Lovells Radiator upgrades have been designed to factory fitment specifications and provide up to 30% more cooling efficiency over a factory radiator. Contact your nearest TJM approved Lovells installer for more information    GVM Upgrade: 3695KG ADR: Complete Lovells Online application Approval: State (Post Registration) or Federal (Pre Registration) VIN Number: Required for application Lovells Kit Part Number: ISUZKIT009-GVM-D Lovells Heavy Duty Coil Spring: IFS-002 Lovells Heavy Duty Leaf Spring IS-003EHD Lovells Gas Legend Front Strut: 64611038 Lovells Gas Legend Rear Shock: 6462258B Package Weight: 130kg Package Weight: 120.00 kg   Compatible Vehicles  ISUZU D-MAX RG 08/20-04/24 2Dr Cab Chassis Hi Rider  ISUZU D-MAX RG 08/20-04/24 Space C/Chas & Pick Up  ISUZU D-MAX RG 08/20-04/24 4Dr C/Chas & Pick Up  ISUZU D-MAX RG 05/24-On SX 2Dr Cab Chassis  ISUZU D-MAX RG 05/24-On SX Space Cab Cab Chassis  ISUZU D-MAX RG 05/24-On LS-U Space Cab Pick Up  ISUZU D-MAX RG 05/24-On SX 4Dr Cab Chassis & Pick Up  ISUZU D-MAX RG 05/24-On LS-M 4Dr Cab Chassis & Pick Up  ISUZU D-MAX RG 05/24-On LS-U 4Dr Cab Chassis & Pick Up  ISUZU D-MAX RG 05/24-On LS-U+ 4Dr Pick Up  ISUZU D-MAX RG 05/24-On X-Terrain 4Dr Pick Up

6.95"(17.6cm) Digital Media Receiver with WebLink™️ Cast Full smartphone integration and enhanced connectivityEnjoy smartphone connectivity including screen mirroring with WebLink™. An anti-glare 6.95" (17.6cm) diagonal touchscreen wakes up right after turning on the ignition and gives you intuitive control over music, communications, and more. Newly added A/V connectivity allows you to hook up an external audio or visual source device. Use with your smartphone Connect your compatible Apple or Android smartphone to get directions, stream music and more. Responsive anti-glare touchscreen The anti-glare 6.95" (17.6cm) touchscreen gives you intuitive control over music playback, making phone calls and more. A/V input connectivity A composite video and stereo audio input terminal enables connection with an external source device. Smarter driving with intelligent voice control Connect your smartphone and speak through the supplied microphone. Voice control makes it safer and easier than ever to navigate, communicate and play music on the road. Siri with Apple CarPlay Easily access the iPhone features you know and love, just by talking to Siri. Music, maps, phone calls and messages are all under your control. Voice Control with Android™ Auto Use voice commands to dictate messages, take phone calls, or get help from Google Maps. You can even control music playback with your voice. Your personal navigator Get directions in real-time without ever taking your hands off the wheel, easily navigate to your destination, or search for stops mid-journey. Navigating with Apple CarPlay Tell Siri where you’re going, and it will give you real-time directions as you drive. Navigating with Android Auto Use Google Maps to get directions and traffic updates whenever you need them. WebLink™ Cast compatible  WebLink™ is a lightweight app delivery platform designed especially for in-vehicle use. Using the Android or iOS device connection, it is now possible to mirror your smartphone screen right on the car audio display—for reliable, responsive infotainment anytime on the road. Anti-glare touchscreen with clear, responsive and sleek design Everything you need is just a tap away, thanks to the 6.95" (17.6cm) sleek anti-glare touchscreen with its large, easy-to-use icons for source selection and settings. Simple button controls Get instant access to commonly used features such as volume, source, sound settings and voice control, for safe and easy operation on the road. Hear music your way Multiple customisation options let you adapt the audio experience to your liking, and with the built-in 4 x 55 W amplification, your music will sound clear even at high volume. Quick Wake-up With the Quick Wake-up feature, you're ready to go, right after turning the ignition Rear-view camera ready Do you have a rear camera installed? View its feed through the screen, along with customisable guidelines that help you back in safely. Easy installation with a compact rear chassis Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation and leaves plenty of room for cabling and other accessories in the space behind the display.  SPECIFICATIONS & FEATURES Enjoy smartphone connectivity including screen mirroring with WebLink and hear the rich sound from the powerful 4 x 55 W amplification and EXTRA BASS™ boost. The anti-glare 6.95" (17.6cm) touchscreen wakes up soon after turning on the ignition and gives you intuitive control over your music, phone calls and much more. Mirror and control selected smartphone apps with WebLink Cast1Anti-glare touchscreen with quick bootEXTRA BASS™ adds low-end powerA/V input for an external audio and visual source deviceRear-view camera ready for safe reversing   General Specifications RMS Power (CTA-2006): 20 watts RMS Power (Manufacturer): 20 watts Expandability & Connectivity AUX Input: Rear (Mini) Audio/Video Input: Rear (Mini) USB Input: Rear USB Port Power: 1.5A Backup Camera Input: Yes Second Camera Input: No Preamp Outputs: 5-channel Subwoofer Preamp Output: Yes Switchable Rear Preamp Outputs: No Memory Card Support: USB memory Smartphone Integration iPhone Compatibility: iPhone 5S and newer Apple CarPlay: Wired only Siri Control: Via CarPlay Android Control: Yes Android Auto: Wired only Amazon Alexa Voice Control: No Tuner Features FM Sensitivity: 7 dBf European Tuning: No Seek/Scan: Seek Radio Data System (RDS): Yes Media & File Playback Supported Audio Formats: MP3, WMA, AAC, FLAC, WAV High-Resolution Audio Playback: No Navigation Compatibility Navigation Platforms: Apple CarPlay, Android Auto Navigation Apps (iOS): Apple Maps, Google Maps, Waze Navigation Apps (Android): Google Maps, Waze Features & Technical Specifications Bluetooth: Built-in Bluetooth Version: 3.0 Satellite Radio Ready: SiriusXM HD Radio: No Video Screen: Yes Screen Size: 6.95″ Screen Type: Resistive (Basic) Preamp Voltage: 2V EQ Bands: 10-band Equalizer Key Button Illumination: White Wireless Remote Included: Yes Steering Wheel Control Compatible: Yes (Adapter Required) Warranty Parts Warranty: 1 Year Labour Warranty: 1 Year Dimensions Chassis Depth: 4.995″ Chassis Width: 7.015″ Chassis Height: 3.935″