
Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - KRLD024
$530.00
$589.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 225mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD024 - Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 130mm (5")
Length 1540mm (61")
Height 195mm (8")
Shipping Weight:
Weight 9.5kg (21.0lbs)

Front Runner
FRONT RUNNER Load Bed Cargo Slide / Large - SSBS009
$2,654.00
$2,949.00
Say goodbye to crawling into the back of your truck every time you need to reach your gear. Removing your tools, gear and boxes becomes easier, quicker and safer with a Front Runner Cargo Slide.
Hold open feature prevents the slide from closing when on uneven surfaces.
Push to close dual latching lock securely keeps the unit closed and rattle-free.
Load Rating: 250kg / 551.2 lbs.
Designed for the worlds toughest roads.
The flat drawer contains multiple tie down points and three cargo attachment channels for securing gear with the Stratchits or other style straps.
High strength, sealed bearings allows the tray to extend nearly 100% from the anchored base.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
Mounts to flat surfaces. Depending on application, drilling into vehicle may be required.
Designed for interior use only with a canopy, camper shell, or other style load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
Note: This cargo slide will only fit certain sized pickup truck load beds and vehicle cargo holds. Please see SPECS for exact product measurements and to determine if this product is the right fit. All vehicles with optional bed liners must check internal measurements.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Features
Consists of:
1 x Cargo Drawer unit
3 x Accessory channels
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Carpeted & Laminated plywood
Product Dimensions:
Closed:
1800mm (70.9") L x 1125mm (44.3") W x 112mm (4.4") H
Open:
3200mm (126") L x 1125mm (44.3") W x 112mm (4.4") H
Inner Tray Dimensions:
1786mm (70.3") L x 940mm (37") W x 50mm (2") H
Width needed between load bed wheel arches: 1022mm (40.2")
Weight:
67.2kg (148.2lbs)
Load Rating:
250kg (551.2lbs)

Front Runner
FRONT RUNNER Mercedes-Benz Sprinter Ladder - LAMS002
$469.00
$521.00
Secures to the rear of the Mercedes/Dodge/Freightliner Sprinter and LDV/Maxus Deliver 9 vans.
Simply mounts to the factory door hinges and door face with minimal modification to the vehicle.
Made from high strength steel and powder coated in the same durable black powder coating as all Front Runner racks.
Steps have rubber inserts for added grip when reaching on top of the Sprinter vans roof rack.
Install or remove effortlessly.
Note: Suitable for all low roof, high roof and super high roof vans.
NOTE: *Does not work with 270 Degree opening rear doors.
Features
Consists of:
1 x Mercedes Sprinter / LDV/Maxus Deliver 9 Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
239mm (9.4") L x 413mm (16.3") W x 1645mm (64.8") H
Weight:
7.9kg (17.4lbs)

Front Runner
FRONT RUNNER Premium Water Tank Hose Kit - WTAN029
$68.00
$75.00
A hose kit for your Front Runner water tanks with brass pipe fittings.
Features
Consists of:
1x 12mm (0.5") diameter x 1500mm (59.1") length of clear hose
5x Hose clamp
3x Straight tank to pipe brass fittings
1x Metal tap

Front Runner
FRONT RUNNER Quick Release Dometic Fridge Strap - STRA069
$38.00
$42.00
Make sure your fridge (or other gear) stays where you want it to with this easy-to-use Quick Release Fridge Strap. This is a quick way to safely secure your fridge to a fridge slide, on top of a drawer system or to a load bed slide. This strap system will give you peace of mind when off-roading.
A Strap to secure your Dometic fridges (and other makes) to the Front Runner fridge slides
Perfect for securing Fridges to Front Runner Drawer systems, Fridge sliders and Load Bed Cargo Slides.
Adjustable to secure a variety of fridges with a maximum usage length of 250mm (9.8").
For added peace of mind, use Rack Accessory Lock / Small to lock your Quick Release Fridge Strap.
Consists of:2 x StrapsInstallation HardwareFitment Guide
Materials used:Black powder-coated high strength steelMild Steel and Poly_Web
Product Dimensions:160mm (6.3") L x 36mm (1.4") W x 30mm (1.2") H
Weight:0.27kg (0.6lbs)

Front Runner
FRONT RUNNER Rack Accessory Lock / Small - RRAC134
$19.00
$21.00
No keys needed.
Easily set your own combo.
Locks Front Runner Rack accessories for holding gear like Tables, Water Tanks, Hi-Lift Jacks, Axes, Wolf Packs and more.
Works with Hi-Lift Jack Bracket, Universal Water Tank Tap, Axe Bracket, Cub Pack Rack Bracket, Wolf Pack Rack Bracket, Lockable Strap For Water Cap / 42L.
Stainless steel rubber coated cable and corrosion resistant tumbler for years of worry-free security.
*Note: Rack accessories are sold separately.
Features
Consists of:
1 x 3-Digit Combination Cable Lock
Materials used:
Casing: Zinc Alloy
Inner Core: Zinc Alloy
Cable: Stainless steel wire with PVC coating
Product Dimensions:
87mm (3.4") L x 30mm (1.2") W x 39mm (1.5") H
Cable Length:
100mm (3.9")
Cable Width:
2.8mm (0.1")
Weight:
30g (17oz)

Front Runner
FRONT RUNNER Slat To Load Bar Conversion End Cap Kit - RRAC044
$25.00
$28.00
Convert any size slat to a load bar with these plastic end caps.
Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
Just pop them on and your slat to load bar "conversion" is complete!
Supplied in sets of (4) four.
Features
Consists of:
4x Load Bar End-caps
Material used:
Plastic - Polypropylene
Product Dimensions:
91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
80g (2.8oz)

Front Runner
FRONT RUNNER Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - By - RRAC182
$42.00
$47.00
A pair of brackets that secure to the slats of your Front Runner Slimsport or Slimpro Van Rack.
Mounts Front Runner side mount accessories such as:
Quick Release Awning Mount Kit
Ratcheting Spade/Shovel & Paddle Mount
Installs in the T-slots of the Slimsport or Slimpro Van Rack and can be inversed to allow for standard or lower mount depending on roof clearance.
Made from black powder coated 6063 T6 aluminum to match your rack accessories.
Supplied with installation hardware and fitting instructions.
Note: This product is only compatible with the Front Runner Slimsport and Slimpro Van Rack Kits.
Features
Consists of:
1 x Pair of Rack Accessory Mounting Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminum
Product Dimensions:
101mm (4") L x 60mm (2.4") W x 50mm (2") H (Per Single Bracket)
Weight:
0.37kg (0.8lbs)

Front Runner
FRONT RUNNER Spare Wheel Clamp / Low Profile - SWCL004
$77.00
$85.00
This Front Runner Spare Wheel Clamp is designed to hold your spare wheel to a Front Runner Roof Rack or Front Runner Load Bar set.
Mounts across 2 slats and can handle mostly any size wheel.
Specifically mounts a raised dish rim with the hollow side facing up.
Tightens down to the back side of the wheel to protect your wheel finish, and can accommodate even the deepest offsets.
Features
Consists of:
1x Rack Bracket
1x Clamp Bracket
1x Mounting Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
263mm (10.4") L x 55mm (2.2") W x 242mm (9.5") H
Weight:
1.5kg (3.3lbs)

Front Runner
FRONT RUNNER Strap Ratchet 25 X 2.5M W/ Hooks - STRA014
$26.00
$29.00
Strap Ratchet 25 X 2.5M W/ Hooks

Front Runner
FRONT RUNNER T-Slot Rubber Beading - RRAC013
$17.00
$19.00
Need a little extra insulation between your rack and gear?
The Front Runner T-Slot Rubber Beading slides easily into your Front Runner rack t-slots for extra grip and cushioning. It reduces rattles and is great for storage boxes, firewood, or any other item that you want to insulate from your rack. Comes in 1.5m (5') lengths.
On some vehicles with sun roofs, installing the t-slot beading on the front slats may help lessen wind noise.
Features
Consists of:
1.5m (5') Length of beading
Materials used:
Ethylene propylene diene monomer (M-class) all weather rubber
Weight:
0.1kg (0.3lbs)

Front Runner
FRONT RUNNER Universal Side Mount For Pro Water Tank / 20L - VACC099
$167.00
$186.00
Install this mount onto a flat surface to allow quick and easy access to your 20L Pro Water Tank (WTAN060).
Easily removable by loosening the stainless-steel eye nuts.
The water tank can be locked for added peace of mind using the Front Runner Accessory Lock (RRAC134) (sold separately).
Plastic alignment spacers protect, align and secure your water tank.
The bracket is made from steel and sealed with the same weather-resistant black powder coating as Front Runner racks.
All installation hardware included.
Features
Consists of:
1 x Universal Side Mount for Pro Water Tank / 20L
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
211mm (8.3") L x 341mm (13.4") W x 237mm (9.3") H
Weight:
2.06kg (4.5lbs)

Front Runner
FRONT RUNNER Universal Track / 1800Mm(L) - TRAC003
$242.00
$269.00
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the t-slotted track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
Made from t-slotted aluminum extrusion.
Often used for trailers and canopies to mount a rack or load bars.
Each track is supplied with fitted double sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
Powder coated black.
Comes in pairs.
Features
TRAC003 - Universal Track / 1800mm(L) - by Front Runner
Consisting of:
1 x TRAC003 - Universal Track / 1800mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
Approximate Installed Weight 3kg (8lbs)
Shipping Dimensions:
Width 110mm (4")
Length 1880mm (74")
Height 110mm (4")
Shipping Weight:
Weight 4.0kg (8.9lbs)

Front Runner
FRONT RUNNER Bbq/Fire Pit - VACC087
$328.00
$365.00
Camp cooking just got even more portable with this BBQ/Fire Pit that keeps the flame off the ground for safe grilling anywhere. Packs flat to save precious cargo room and transport easily and packs neatly in Wolf Pack Pro*.
A BBQ/Fire Pit that is designed to pack flat at 1.5 inches / 38mm thick.
Features a large grill surface area.
Sturdy base for safe grilling.
Quick and easy 30-second setup.
Sides of grill serve as a wind-break.
Safely contains your fire and keeps the fire elevated off the ground.
Constructed from durable 3CR12 stainless steel, providing high rust and corrosion resistance.
Supplied with gird lifting tools.
Stores neatly in Wolf Pack Pro*.
*Note: The Wolf Pack Pro is sold separately
Consists of:1 x BBQ/Fire Pit Assembly1 x Ember Tray/Griddle2 x Grid2 x Grid Lifting ToolsFitting & Assembly Instructions
Materials used:3CR12 Steel
Product Dimensions:Open Dimensions:436mm (17.2") L x 436mm (17.2") W x 310mm (12.2") H
Close Dimensions:415mm (16.3") L x 310mm (12.2") W x 38mm (1.5") H
Weight:7.9kg (17.4lbs)

Front Runner
FRONT RUNNER Aluminium Telescopic Ladder / 2.9M - LADD008
$232.00
$258.00
A telescopic ladder that effortlessly expands into a 2.9m, nine (9) step ladder to reach the top your vehicle to load goods and equipment onto the Roof Rack.
A telescopic ladder that effortlessly expands into a 2.9m, nine (9) step ladder to reach the top your vehicle to load goods and equipment onto the Roof Rack.
Made of Aluminium 6063/T5.
Folds down and locks in place with each step section.
Expands in one smooth motion.
Velcro nylon strap keeps ladder in place when closed.
Compact and sturdy.
Can be used in conjunction with the Telescopic Ladder Support Bracket / Slimline II Rack to securely stand against the Slimline II Roof Rack when in use.
Stores neatly in its own storage bag.
Consists of:1 x Telescopic Ladder1 x Storage bag
Materials used:Aluminium 6063/T5
Product Dimensions:Use height:290cm
Fold height: 78cm
Fold width: 46cm
Fold depth: 7.2cmProfile Diameter: 32 - 60mm
Cushion Thickness: 2.6cm
Rung Distance: 29.5cm
Rung Size: 4×2.79cm
Max loading:150kg
Weight:GW/NW:9.8kg/8.7kg

Front Runner
FRONT RUNNER 40In Led Light Bar Vx1000-Cb Sm / 12V/24V - RRAC265
$711.00
$790.00
A 40” LED Light Bar featuring 36 intense, high-performance LEDs, with OSRAM technology, that reaches a distance of 525m and delivers 6000 lumens. The 5700 Kelvin, light intensity is distributed as a combo beam pattern- near and far-field illumination. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
To accommodate its wide range of uses, the searchlight is equipped with a durable polycarbonate lens. The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
Individual installation is possible due to the VX1000-CB SM's double ECE certification. The 12V/24V LED light bar is ECE-compliant and versatile in application and is not limited to automotive use only. Special regulations and legislation within each country should be taken into consideration before use. Secures to your Front Runner Roof Rack with supplied RRAC217.
Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions
Materials used:Black powder coated steel and aluminium mounting brackets
Product Dimensions:Light Bar:1031mm (40.6") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with Bracket:1070mm (42.1") L x 102mm (4") W x 58mm (2.3") H
Weight:5.56kg (12.3lbs)
Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)

Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Side Mount Jerry Can Holder - JCHO017
$305.00
$339.00
The same trusted and off-rough tough Front Runner lockable Jerry Can Holder, only conveniently reconfigured to mount on the side of the vehicle via a gutter mount.
The adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse.
For use with 20l / 5.3 gallon NATO/Wedco style military cans.
This strap covers the Jerry can cap. Add your own padlock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.
Simple installation that uses an existing pop-rivet hole.
Made of durable black powder coated high strength steel and designed to mount to the rain gutter on vehicles like the classic Land Rovers.
Note: Will not work with Scepter style cans.Note: This Jerry Can Holder is not compatible with the Land Rover New Defender.
Consists of:1 x Side Mount Jerry Can HolderInstallation HardwareFitting Instruction
Materials used:Black powder coated high strength steel
Product Dimensions:230mm (9.1") L x 385mm (15.2") W x 711mm (28") H
Weight:5.5kg (12.1lbs)

Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Gullwing Window / Aluminium- - GWLD009
$1,259.00
$1,399.00
The Front Runner Gullwing window replaces the rear window of a Land Rover Defender allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Aluminum Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle.
Fits in minutes, no modifications required.
Sealed with the same durable, weather resistant powder coating as the Front Runner Slimline II Roof Rack.
Includes 2 locking latches.
The Land Rover Defender can be brought back to stock within minutes by removing and replacing with standard window.
Note: The glass and aluminium panels for the Land Rover Defender are not interchangeable.
Consists of:1x Aluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1") x W 50mm (2") x H 490mm (19.3")Door Panel: L 1044mm (41.1") x H 414mm (16.3")Weight:15.5kg (34.2lbs)

Direction-Plus
DIRECTION-PLUS Transchill Transmission Cooler Kit Ford Ranger, Everest Pxiii Bi-Turbo () - TCB663DPK
$674.10
$749.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply

Direction-Plus
DIRECTION-PLUS Transchill Transmission Cooler Kit Toyota Hilux N80 () - TCB628DPK
$485.10
$539.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply

Direction-Plus
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Isuzu D-Max & Mu-X () - TCB601DPK
$485.10
$539.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB601DPK fits Isuzu D-Max and MU-X 4JJ1TCX (3.0L 4cyl) 2012 – 2020 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply

Polyair
POLYAIR Standard Bellows Ultimate Airbag Kit, Ford Ranger Raptor - 89416ULT
$1,345.50
$1,495.00
POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY.
NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY.
This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS
*** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS !
This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required.
Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle.
The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain.
This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design.
NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!

Polyair
POLYAIR 2" Lift Red Series Airbag Kit, Land Rover Defender - 95095
$364.50
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Landrover - Defender 110 1983 - 2016

Polyair
POLYAIR 2" Lift Bellows Airbag Kit, Isuzu D-Max - 85105R
$765.00
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Great Wall - V200 / V240, 2009 - 2013, 4WD
Holden - Colorado RC 2008 - 2012, 4WD,
Holden - Colorado RG,
Holden - Colorado 2012-on - 2WD LOW RIDE ,
Holden - Rodeo RA 2003 - 2008, 6 CYLINDER - 2/4WD
Isuzu - D-Max Gen 1, 2008 - 2011, 4WD,
Isuzu - D-Max Gen 2, 2012 - 2020, 2WD LOW RIDE

Polyair
POLYAIR 2" Lift Ultimate Airbag Kit, Toyota Landcruiser - 15993ULT
$387.00
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Landcruiser 300 Series

Polyair
POLYAIR 2" Lift Red Series Airbag Kit, Holden Colorado 7 / Trailblazer - 11092
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Holden - Colorado 7 Trailblazer RG
Isuzu - Mu-X Gen 1 & Gen 2, 2013 -on

GME
GME Xrs™ Connect Wireless Ptt And Steering Wheel Mount - XRS-PTT
$69.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The XRS-PTT is a IP67 wireless Push-To-Talk (PTT) and steering wheel clamp to suit the XRS-BT1.
The PTT design provides access to the battery without the need to remove it from the steering wheel, plus, the PTT button can also be removed from the clamp and mounted to an alternative location using the dash mount kit supplied.
Bluetooth® Wireless Technology
Wireless Push-to-Talk
Adjustable Steering Wheel Clamp
IP67 Ingress Protection (XRS-PTT)
3 Year Warranty
Key Features
Bluetooth® Wireless Technology
Wireless Push-to-Talk
Adjustable Steering Wheel Clamp
IP67 Ingress Protection (XRS-PTT)
In the box
IP67 Wireless PTT and Steering Wheel Clamp (XRS-PTT)
PTT Dash Mount Kit
2mm Silicone Sleeve

GME
GME Uhf Cb Magnet Antenna Sma - AE4026SMA
$55.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
Magnetic Antenna Base with Lead & Plug – SMA Connector.
Genuine GME Accessory
Key Features
Magnetic Mount External Antenna
Pre-terminated with SMA Connector
3m Cable Length
Suits GME Handheld Radios – TX6150, TX6155 and TX6160 Variants
In the box
Antenna Assembly

MSA
MSA 4X4 Patrol Y62 Right Storage Drawer System - 41009
$1,580.40
$1,756.00
Suits Nissan Patrol Y62
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1110mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm

MSA
MSA 4X4 Landcruiser 200 Series Left Storage Drawer System - E1030-LC200-LE-COM
$1,264.50
$1,405.00
Suits Toyota Landcruiser 200 Series GXL/VX/Sahara
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm

MSA
MSA 4X4 Landcruiser 100 Series Right Storage Drawer System - E1030-LC100-RI-COM
$1,264.50
$1,405.00
MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm

MSA
MSA 4X4 Power Fold Towing Mirrors For Mitsubishi Triton Series 2015-2024 - TM1155
$1,529.11
$1,699.01
VEHICLE DATE: 2015-02/2024
PRODUCT TYPE: Power Fold
SUITS: Mitsubishi Triton
Chrome, Electric, Heated, Indicators, Blind Spot Monitoring, Power Fold
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES:
MSA 4X4’s 5 Year Warranty
MSA POWER FOLD™ is a trademark used under licence

TJM
BOULIA Roof Top Tent Cover - 620RCTCOVERT (In Store Pick-Up Only)
$219.00
The Replacement Outer Cover Bag is designed to fit the TJM Boulia roof top tent. The bag is specifically designed to fit the TJM Boulia roof top tent, ensuring a perfect fit and protection from dust, dirt, and water. With its easy-to-use design, you can quickly and easily replace a worn or damaged outer cover bag and get back to enjoying your camping trips. Keep your TJM Boulia roof top tent looking and performing like new with the Replacement Outer Cover Bag.
Specifications
Material: 1000D PVC
Package Weight: 1.90 kg

TJM
TJM Airtec Snorkel Wedgetail Polyethylene Black Kit For Ford Ranger Py 06/22-On - 011SATW0121Y
$599.01
Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. A must-have upgrade for any 4WD enthusiast, our snorkels allow hassle-free air induction. In addition to 4WD benefits, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compare to air at bonnet level. Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. TJM snorkels are built tough for challenging Australian conditions.
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and Engineered to supply correct volume of air to engine
Tech: Wedgetail style air ram.
Package Weight: 4.16 kg
Compatible Vehicles
FORD RANGER PY 06/22-On XL 2Dr Cab Chas 2.0L SiT
FORD RANGER PY 06/22-On XL Super C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XL 4Dr C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLS 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT Super Cab P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT 4Dr C/C & P/Up 3.0L V6
FORD RANGER PY 06/22-On Sport 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On Sport 4Dr P/Up 3.0L V6
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 2.0 BiT
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 3.0 V6
FORD EVEREST UB 09/22-On Ambiente 2.0L BiT
FORD EVEREST UB 09/22-On Trend 2.0L BiT
FORD EVEREST UB 09/22-On Platinum 3.0L V6
FORD EVEREST UB 09/22-On Sport 3.0L V6

TJM
TJM Airtec Snorkel Polyethylene Black Kit For Toyota Hilux 6Th Gen - 011SAT0387F
$449.00
Give your vehicle a breath of fresh air with a TJM Airtec snorkel. This snorkel kit suits Toyota Hilux 11/2001 - 03/2005 1KZ 3 L turbo and EFI non turbo vehicles. A must-have upgrade for any 4WD enthusiast, our snorkels allow deep water crossings and hassle-free air induction when immersed in dust. In addition to 4WD benefits, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compare to air at bonnet level. Our snorkels are designed and engineered in Australia for uncompromised performance. Read Less
Pricing
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and Engineered to supply correct volume of air to engine
Suits: 1KZ Turbo Diesel & EFI Non Turbo Diesel 11/2001-03/2005 models
Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine
Package Weight: 3.00 kg
Compatible Vehicles
TOYOTA HILUX 6th GEN 11/01-03/05
TOYOTA HILUX 6th GEN 11/97-10/01

TJM
TJM Airtec Snorkel Polyethylene Black Kit For Toyota Fj Cruiser - 011SAT0185A
$549.00
Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. This snorkel kit suits Toyota FJ Cruiser vehicles. They are proudly designed, engineered and molded in Australia from high grade UV-resistant (UV20 UV24) polyethylene for maximum strength and rigidity. A simple installation process requires minimal modifications to your vehicles original components. It takes a lot to stand out from the pack, but TJM Airtec snorkels do just that, even winning "Best Aftermarket Product Award under $700" in 4x4 Australia Magazine. Read Less
Pricing
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and Engineered to supply correct volume of air to engine
Suits: V6 Petrol model
Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine
Package Weight: 3.60 kg

TJM
TJM Airtec Snorkel Polyethylene Black Kit For Gwm Cannon Npw - 011SAT0117F
$599.01
Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. A must-have upgrade for any 4WD enthusiast, our snorkels allow hassle-free air induction. In addition to 4WD benefits, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compare to air at bonnet level. Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. TJM snorkels are built tough for challenging Australian conditions.
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and Engineered to supply correct volume of air to engine
Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine.
Package Weight: 3.66 kg
Compatible Vehicles
GWM CANNON NPW 09/20-On 4Dr Pick Up

TJM
TJM Winch Frame Mount Kit For Nissan Or Toyota - 957MTT1399M
$275.00
Sturdy steel bolt-on winch mount kit to suit TJM bull bars that is designed to spread the winch load evenly across the chassis. Suits up to 9500lb/4300kg rated winches. Compatible Vehicles NISSAN NAVARA D22 09/01-09/09 Japan Built NISSAN NAVARA D22 10/09-03/15 Thai Built TOYOTA LANDCRUISER COMMERCIAL 73/74 SERIES 11/84-12/89 TOYOTA LANDCRUISER COMMERCIAL HJ75, FJ75 84-99 2Dr C/Chassis TOYOTA LANDCRUISER COMMERCIAL HJ75, FJ75 84-99 Troopy TOYOTA LANDCRUISER COMMERCIAL HZJ78, FZJ78 99-07 Troopy TOYOTA LANDCRUISER COMMERCIAL HZJ79, FZJ79 99-07 2Dr C/Chassis TOYOTA HILUX 5th GEN 10/88-10/97 - Independent Front TOYOTA HILUX 5th GEN 10/88-10/97 - Leaf Front Suspension

TJM
TJM Winch Frame Mount Kit For Land Rover Discovery - 957MTT1539T
$465.00
Sturdy steel bolt-on winch mount kit to suit TJM T15 bull bar that is designed to spread the winch load evenly across the chassis. Suits up to 9500lb/4300kg rated winches. Landrover Discovery Series 2 02/99 - 02/05 Package Weight: 13.40 kg

TJM
TJM Yellow Winch Rope Synthetic 9.5Mm - 946TQSYNR1
$249.00
The Synthetic Rope 9.5mm is the perfect addition to your Torq winch setup. This high-quality rope is made from durable synthetic materials that are designed to withstand tough off-road conditions. The 9.5mm thickness provides excellent strength, making it ideal for heavy-duty use. Unlike traditional steel cables, synthetic ropes are lighter and easier to handle, reducing the risk of injury during operation. Specifications Suitable for winches up to 12,000lb 9.5mmØ x 28metre Constructed from 12 Strand Braided UHMWPE Includes stainless rope thimble & protective sleeve at both ends to provide additional abrasion & wear resistance & protect the rope from heat generated from drum Package Weight: 2.10 kg

TJM
TJM Awning 1400 X 2000Mm - 620RTA140 (Pick up only)
$199.00
A TJM Awning gives you instant comfort and protection from the elements wherever you pull up. The smallest and most compact variant in the range, the 1400mm (L) x 2000mm (W) awning is a perfect shade and shelter solution for the rear of your vehicle and can work in perfect harmony with a larger TJM Awning on the side of your 4x4. Swift to set up in under 30 seconds and simple to pack away, TJM awnings are made from hardy 280gsm ripstop poly/cotton canvas that's built to last while delivering unbeatable sun protection thanks to a UV rating of UPF50+. Each awning's legs are constructed from black powder-coated aluminium to keep them standing in all conditions, while they fold away neatly in individual pole channels to make set up and pack up simple.
Specifications
Fabric weight:280gsm ripstop poly/cotton canvas
UV rating:UPF50+
Water column:1000mm
Travel bag: Black 1000D PVC
Hinge (knuckle): Nylon
Guy rope: 6mm yellow reflective
Brackets and hardware
Twist lock poles: Black aluminium
Pole pins: Stainless steel
Awning side flaps: 75mm side flaps
Internal storage bag: Yes
Package Dimensions
Weight" 8.800000 kg
Length: 140 mm
Width: 120 mm
Height: 1500 mm

TJM
TJM Double Swag - 620TJMDSWAG (Pick up Only)
$399.00
The TJM Double Swag - perfect for any camper and can fit 2 adults. Be it for an overland adventure, fishing trip or a relaxing getaway this beauty will have you covered. Trusty and reliable, well ventilated and waterproofed - the TJM Swag won't let you down.
Size:
Open : 205cm (L) x 140cm (W) x 86cm (H)
Packed : 145cm (L) x 40cm (W) x 40cm(H)
Sleeping Capacity : 2 Adults Weight : 18kg
Material:
Swag : 400gsm
Ripstop Canvas Floor : 500gsm
Reinforced PVC Mesh Windows and Doors
Superfine Mesh Mattress : 205cm (L) x 136cm (W) x 50mm (H)
High Density 35D Foam Curved Poles
8.5mm Ø 7 Series High Tensile Aluminium Poles Ridge Pole
25mm/22mm Aluminium Telescopic Cam Lock Poles
Features:
100mm High Bucket Floor
Entrance Floor
Internal Storage Pockets
Dual Storm Windows and Doors
Includes Awning Poles and Storage Bag

MSA
MSA 4X4 Power Fold Towing Mirrors Landcruiser 300 Series July 2021-Current - TM2250
$1,552.50
$1,725.00
MSA 4X4 Power Fold Towing Mirrors TM2250 Landcruiser 300 Series July 2021-Current
Black, Electric, Indicators, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-cast aluminium components
5 Year Warranty

MSA
MSA 4X4 Power Fold Towing Mirrors Isuzu D-Max September 2020-Current - TM951
$1,529.11
$1,699.01
MSA 4X4 Power Fold Towing Mirrors TM950 Isuzu D-MAX September 2020-Current
Chrome, electric, Indicators, Blind Spot Monitoring, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-cast aluminium components
5 Year Warranty

MSA
MSA 4X4 Power Fold Towing Mirrors -Ford Ranger 2012-May 2022 - TM651
$1,485.00
$1,650.00
MSA 4X4 TM651 -Ford Ranger 2012-May 2022 Chrome, Electric, Heated, Indicators, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-castaluminium components
5 Year Warranty

MSA
MSA Power Fold Towing Mirror Ford Ranger 2012-May 2022 - TM650
$1,485.00
$1,650.00
MSA 4X4 TM650 -Ford Ranger 2012-May 2022 Black, Electric, Heated, Indicators, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-castaluminium components
5 Year Warranty

TJM
TJM Tyre Inflation Kit - 013COMPDTIAA
$99.00
The TJM Tyre Inflation Kit is the perfect companion for the car enthusiast. Featuring a digital display with a backlight, along with a 600mm rubber hose and durable fittings, inflating your tyres has never been quicker or simpler. With multiple unit measurement options, getting the perfect tyre pressure is as easy as pushing a button! Pump up your ride in no time with this nifty kit.

TJM
TJM 8T Snatch Strap Kit - 867TJMRECSKIT8T
$115.01
Be ready for when you get stuck off-road with the TJM 8T Snatch Strap Kit! It's the ultimate get-out-of-a-jam set, complete with an 8T snatch strap, bow shackles (3.25T WLL), recovery gloves, a gear bag, and safety guide - so you can recover with confidence. Don't get bogged down - snatch it up and hit the trails!

TJM
TJM Kinetic Recovery Kit - 867TJMRECKITKR13T
$339.00
Take your recovery game to the next level with the TJM Kinetic Recovery Kit. With a 50% more elongation than a traditional snatch strap and a soft shackle made from genuine spectra fiber, you won't be stuck in sand, mud, snow (or any other sticky situations) for long. And the TJM recovery blanket? It's designed to keep you safe, adding another layer of protection against the recoil of the strap. Get out of any jam easily, safely and in style.
Specifications
Includes:
1 X 22mm Ø x 9m13000KG Recovery Rope with Neoprene Sleeve2 X 21,000KG Soft Shackle1 X Recovery Blanket1 X Gloves (XL)2 X Keepers1 X TJM Gear Bag