All

Alpine BRV-S65 BassRev 6.5" 2-Way Coaxial Speakers with HEDGE Surround Technology Upgrade your vehicle’s factory audio system with the Alpine BRV-S65 BassRev 6.5" 2-Way Coaxial Speaker System. Engineered from Alpine’s decades of acoustic innovation, the BassRev Series introduces advanced HEDGE (High Excursion Design Gathered Edge) technology, delivering deeper bass response, greater speaker excursion, and improved sound pressure levels while maintaining Alpine’s signature clarity and precision. Combining a lightweight polypropylene woofer with an integrated 1-inch polyester soft dome tweeter, the BRV-S65 delivers rich bass, detailed vocals, and smooth high frequencies in a simple drop-in coaxial design. Perfect for factory speaker replacement, the BRV-S65 offers a significant improvement in audio performance for a wide range of vehicles. Key Features 6.5" (165mm) 2-Way Coaxial Speaker System designed for premium sound quality and easy installation. Exclusive HEDGE Surround Technology increases cone excursion for deeper bass and greater impact. Lightweight Polypropylene Woofer Cone delivers accurate sound with reduced distortion. Integrated 1" Polyester Soft Dome Tweeter provides detailed and smooth high-frequency response. Large 95mm Strontium Ferrite Magnet Structure enhances speaker efficiency and control. 40mm Voice Coil Design supports increased power handling and dynamic performance. Neodymium Tweeter Magnet ensures clean and precise treble reproduction. High-Quality Audio-Grade Crossover Network optimises frequency distribution. Factory Speaker Replacement Design suitable for a wide range of vehicles. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is engineered to maximise low-frequency performance by allowing greater cone movement while maintaining exceptional control. The result is powerful bass response within the critical 40Hz–80Hz frequency range without sacrificing accuracy. With up to 28mm of maximum linear excursion, the BRV-S65 produces deeper, more impactful bass than conventional factory replacement speakers, delivering a fuller and more immersive listening experience. Polypropylene Woofer for Accurate Sound Reproduction The BRV-S65 features a specially engineered polypropylene woofer cone that combines lightweight construction with outstanding rigidity. This design minimises unwanted resonance and distortion while maintaining excellent structural integrity even at high volume levels. The result is clean bass response, detailed midrange frequencies, and balanced overall sound performance across a wide range of music genres. Large Magnet Structure for Powerful Performance Built with a large 95mm Strontium Ferrite magnet and oversized 40mm voice coil, the BRV-S65 delivers enhanced driver control, greater efficiency, and increased sound pressure levels. Combined with Alpine’s HEDGE surround technology, this powerful motor structure enables louder output and stronger bass performance. Integrated Soft Dome Tweeter with Neodymium Magnet The integrated 1-inch polyester soft dome tweeter delivers smooth, detailed, and natural high-frequency reproduction. Featuring a lightweight polyester diaphragm and powerful Neodymium magnet assembly, the tweeter accurately reproduces subtle musical details, vocals, and harmonics with excellent clarity. The coaxial design ensures seamless integration between low and high frequencies, creating a balanced and enjoyable listening experience throughout the vehicle cabin. OPTIM™Sync Compatible Audio Enhancement The BRV-S65 is compatible with Alpine’s revolutionary OPTIM™Sync technology when used alongside the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock greater low-frequency extension, smoother tonal balance, and improved overall performance. Ideal Factory Speaker Upgrade Designed for direct replacement of factory-installed speakers, the BRV-S65 provides a simple upgrade path for drivers looking to improve their vehicle's audio quality. Its coaxial design simplifies installation while delivering significant improvements in clarity, bass response, and overall listening enjoyment. Technical Specifications Model Alpine BRV-S65 Speaker Type 2-Way Coaxial Speaker System Woofer Size 6.5" (165mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 40mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 95mm Tweeter Type 1" Polyester Soft Dome Tweeter Tweeter Magnet Material Neodymium Tweeter Voice Coil 20mm Crossover Network High-Quality Audio-Grade Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 38Hz – 20kHz Impedance 4 Ohms Sensitivity 84dB/W Recommended Amplification Up to 50W RMS Per Channel Speaker Dimensions Frame Diameter 16.5 cm Cut-Out Diameter 15.6 cm Mounting Depth 7.13 cm Mounting Height 1.09 cm Magnet Diameter 9.5 cm What's Included 2 x Alpine BRV-S65 6.5" BassRev Coaxial Speakers Integrated 1" Soft Dome Tweeters Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S65? Advanced HEDGE surround technology for enhanced bass response Powerful 95mm magnet structure and 40mm voice coil design Lightweight polypropylene woofer for accurate sound reproduction Integrated soft dome tweeter with Neodymium magnet Easy factory speaker replacement installation OPTIM™Sync compatibility for advanced DSP tuning Excellent balance of bass, mids, and highs Legendary Alpine engineering and reliability Experience deeper bass, greater clarity, and a more immersive driving experience with the Alpine BRV-S65 BassRev 6.5" Coaxial Speakers — a premium audio upgrade designed to bring your music to life.

Alpine BRV-S65C BassRev 6.5" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's sound system with the Alpine BRV-S65C BassRev 6.5" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering deeper bass response, improved cone control, and exceptional sound clarity while maintaining Alpine’s renowned audio precision. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S65C provides rich low frequencies, detailed vocals, and crystal-clear highs. Designed as a premium factory speaker replacement, these speakers offer a significant upgrade in performance for a wide variety of vehicles. Key Features 6.5" (165mm) 2-Way Component Speaker System engineered for superior audio performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper and more impactful bass. Lightweight Polypropylene Woofer Cone delivers excellent rigidity with reduced distortion. 1" Polyester Soft Dome Tweeters reproduce smooth and detailed high frequencies. Large Strontium Ferrite Magnet Structure improves efficiency and speaker control. 40mm Woofer Voice Coil supports increased power handling and dynamic output. High-Quality Audio-Grade Crossover Network ensures seamless integration between woofer and tweeter frequencies. Neodymium Tweeter Magnets provide precise and articulate treble reproduction. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP Amplifier. Revolutionary HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise low-frequency performance. By allowing greater cone travel while maintaining exceptional control, the BRV-S65C achieves impressive bass output within the critical 40Hz–80Hz range. Capable of achieving up to 28mm of maximum linear excursion, these speakers produce powerful bass response that adds depth and impact to your music without compromising overall sound quality. Lightweight Polypropylene Woofer Cone The BRV-S65C features a durable polypropylene woofer cone designed to remain lightweight yet highly rigid. This advanced cone material effectively resists unwanted resonance and vibration, allowing for accurate and balanced sound reproduction even during demanding listening conditions. The result is cleaner bass response, improved midrange detail, and lower distortion at higher volume levels. Large Magnet Motor Structure Equipped with oversized 95mm Strontium Ferrite magnets and large 40mm voice coils, the BRV-S65C is built to deliver enhanced speaker control, increased efficiency, and greater sound pressure levels. Combined with HEDGE surround technology, this powerful motor structure produces louder, punchier sound with improved low-frequency extension. Polyester Soft Dome Tweeters with Neodymium Magnets The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with outstanding precision. Lightweight polyester diaphragms combined with powerful Neodymium magnets provide exceptional clarity, smoothness, and accuracy throughout the high-frequency range. Enjoy improved sound staging, wider imaging, and immersive listening performance with every drive. OEM-Friendly Tweeter Installation The BRV-S65C tweeters are designed for versatile installation with removable housings and trim rings that reduce overall size for OEM integration. This compact design allows installation into many factory tweeter locations including: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexibility enables a clean, factory-style appearance with minimal modification required. OPTIM™Sync Technology Compatibility The BRV-S65C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies dynamic bass enhancement and speaker-specific equalisation profiles to unlock deeper bass performance, smoother tonal balance, and improved overall sound quality. Technical Specifications Model Alpine BRV-S65C Speaker Type 2-Way Component Speaker System Woofer Size 6.5" (165mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 40mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 95mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 38Hz – 20kHz Impedance 4 Ohms Sensitivity 84dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 16.5 cm Cut-Out Diameter 15.6 cm Mounting Depth 7.13 cm Mounting Height 1.09 cm Magnet Diameter 9.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S65C 6.5" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S65C? Advanced HEDGE surround technology for powerful bass performance Premium polypropylene woofer cone for accurate sound reproduction Large 40mm voice coil and 95mm magnet structure for increased output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design for factory locations Compatible with Alpine OPTIM™Sync DSP processing Excellent factory speaker replacement upgrade Legendary Alpine engineering and sound quality The Alpine BRV-S65C BassRev 6.5" Component Speaker System delivers deep bass, exceptional clarity, and premium sound quality, making it the ideal upgrade for drivers seeking an immersive and powerful in-car audio experience.

Alpine BRV-S80C BassRev 8" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's audio performance with the Alpine BRV-S80C BassRev 8" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering powerful bass response while maintaining the exceptional clarity, detail, and precision Alpine is renowned for. Designed as a premium factory speaker replacement, the BRV-S80C combines an 8-inch lightweight polypropylene woofer with a precision 1-inch polyester soft dome tweeter to produce deep bass, detailed midrange frequencies, and crystal-clear highs. Whether powered by a factory head unit or aftermarket amplifier, these speakers deliver immersive sound with outstanding balance and dynamic performance. Key Features 8" (200mm) 2-Way Component Speaker System engineered for superior sound quality and bass performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper, more impactful bass. Lightweight Polypropylene Woofer Cone provides excellent rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth, detailed high-frequency reproduction. Large Strontium Ferrite Magnets increase driver force and efficiency. High-Quality Audio-Grade Tweeter Crossovers ensure seamless frequency integration. Neodymium Tweeter Magnets offer precise and articulate high-frequency response. Flush Mount & OEM-Friendly Tweeter Design for easy installation in factory locations. Compatible with Alpine OPTIM™8 DSP for advanced OPTIM™Sync bass optimisation. Ideal Factory Speaker Upgrade for a wide range of vehicles. All-New HEDGE Surround Technology At the heart of the BRV-S80C is Alpine’s revolutionary HEDGE (High Excursion Design Gathered Edge) surround technology. Specifically engineered to maximise low-frequency output, HEDGE dramatically increases cone travel while maintaining control and accuracy. The result is powerful bass response within the critical 35Hz–80Hz frequency range, delivering impressive low-end impact and a maximum linear excursion peak of 28mm. You'll experience bass that is not only heard but felt, without sacrificing clarity or balance. Lightweight Polypropylene Woofer Cone The BRV-S80C utilises a specially engineered polypropylene woofer cone that combines lightweight construction with exceptional rigidity. This advanced material minimises unwanted resonance and distortion while maintaining structural integrity under demanding listening conditions. Even at high volume levels and large cone excursions, the woofer reproduces music with smooth, accurate, and balanced performance across the entire frequency spectrum. Large Magnet Structure for Greater Output Featuring oversized 100mm Strontium Ferrite magnets and large 35mm voice coils, the BRV-S80C is built to deliver increased cone control and higher sound pressure levels. Combined with Alpine’s HEDGE surround technology, this powerful motor structure enables louder output, improved efficiency, and deeper bass performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters provide exceptional high-frequency detail and smooth tonal balance. Designed with lightweight polyester diaphragms and powerful Neodymium magnets, these tweeters accurately reproduce subtle musical details, transients, and harmonics for an expansive and immersive listening experience. The result is precise imaging, excellent sound staging, and crystal-clear highs without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S80C tweeters feature a collapsible housing and removable trim ring, allowing installation into many factory tweeter locations including: A-Pillar Mounts Mirror Sail Panels Factory Tweeter Pods Door Trim Locations This flexible design enables a clean, factory-style installation while preserving the vehicle's original interior appearance. OPTIM™Sync Compatible Performance The BRV-S80C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. This advanced processing platform intelligently applies dynamic bass enhancement and custom equalisation profiles specifically tuned for BassRev speakers, unlocking deeper bass, improved tonal balance, and enhanced overall performance. Technical Specifications Model Alpine BRV-S80C Speaker Type 2-Way Component Speaker System Woofer Size 8" (200mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 35mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 100mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 35Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 20.96 cm Cut-Out Diameter 19.7 cm Mounting Depth 8.55 cm Mounting Height 1.09 cm Magnet Diameter 10.0 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S80C 8" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S80C? Advanced HEDGE surround technology for deeper bass response Premium polypropylene woofer for clean, distortion-free sound Powerful Strontium Ferrite magnet motor structure Detailed and smooth polyester soft dome tweeters OEM-friendly installation design OPTIM™Sync compatibility for enhanced bass performance Perfect upgrade from factory vehicle speakers Legendary Alpine engineering and sound quality The Alpine BRV-S80C BassRev 8" Component Speaker System delivers the ideal balance of powerful bass, detailed highs, and exceptional clarity, making it the perfect audio upgrade for drivers seeking premium sound performance in any vehicle.

Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer with 400W RMS Amplifier & OPTIM™Sync DSP Experience powerful, controlled bass without sacrificing valuable cargo space with the Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer. Developed from Alpine’s decades of acoustic engineering expertise, the PWV-SB10 combines advanced DSP processing, premium enclosure construction, and high-output performance to deliver deep, impactful bass while maintaining Alpine’s renowned sound clarity and precision. Featuring Alpine’s revolutionary OPTIM™Sync technology and an integrated 400W RMS Class-D amplifier, this compact powered subwoofer is engineered to compete with larger traditional subwoofer enclosures. Whether paired with a factory head unit or a complete aftermarket audio system, the PWV-SB10 delivers exceptional low-frequency performance with effortless integration. Key Features 10" BassRev™ Slim-Line Powered Subwoofer designed for powerful and accurate bass reproduction. Integrated 400W RMS Class-D Amplifier with built-in DSP processing for maximum efficiency and performance. Exclusive OPTIM™Sync Technology dynamically optimises bass output and tonal balance. Compact Shallow Enclosure Design for flexible installation in cars, SUVs, utes and 4WDs. Sealed Enclosure Construction enhances low-end punch, impact and musical accuracy. Premium Carpeted MDF Enclosure with reinforced double-brace structure for superior rigidity. Extended Protective Grille protects the woofer from cargo movement and accidental damage. High-Level and RCA Inputs for compatibility with factory and aftermarket audio systems. Variable Low-Pass Filter, Gain Control and Phase Adjustment for precise tuning. Dual 4-Ohm Voice Coil Design engineered for efficient power handling and performance. Revolutionary OPTIM™Sync Technology Alpine’s proprietary OPTIM™Sync algorithm is specifically engineered to maximise the performance of BassRev audio components. Integrated directly into the PWV-SB10’s DSP amplifier, OPTIM™Sync intelligently applies dynamic bass enhancement and pre-EQ optimisation to safely extend low-frequency output while maintaining tonal accuracy and control. The result is richer, deeper bass with greater impact and musical detail than conventional powered subwoofers, creating an immersive listening experience across all genres of music. Integrated High-Power Class-D Amplifier The built-in 400W RMS amplifier delivers efficient, high-output power while maintaining compact dimensions and low heat generation. Advanced onboard tuning controls make it easy to optimise bass performance to suit your vehicle and listening preferences. 400W RMS Continuous Power 800W Peak Power Handling Variable Low-Pass Filter Phase Control (0° / 180°) Adjustable Gain Control Select-able Turn-On Modes High-Level Speaker Inputs Low-Level RCA Inputs Premium MDF Enclosure Construction Built for long-term durability and consistent performance, the PWV-SB10 features a carpeted MDF enclosure reinforced with a double-brace internal structure. This premium construction minimises vibration and unwanted resonance, allowing the subwoofer to deliver clean, accurate bass even at higher volume levels. An extended protective grille safeguards the woofer from everyday impacts while maintaining a clean and professional installation appearance. Groundbreaking X-Max Excursion Design The BassRev 10" subwoofer incorporates an ultra-wide rubber surround engineered for maximum linear cone excursion and increased sound pressure levels. This advanced design allows the woofer to move more air while maintaining excellent control, resulting in powerful bass output with outstanding clarity and precision. Factory & Aftermarket Audio Integration The Alpine PWV-SB10 is designed to integrate seamlessly into both factory and aftermarket audio systems. High-level speaker inputs allow direct connection to factory-installed head units, while RCA inputs provide straightforward integration with aftermarket amplifiers and processors. The slim enclosure profile allows convenient installation behind seats, in cargo areas, or other space-limited locations while preserving valuable interior room. Technical Specifications Model Alpine PWV-SB10 Subwoofer Size 10 Inch (25.4 cm) Amplifier Type Integrated Class-D Amplifier with DSP RMS Power Handling 400W RMS Peak Power Handling 800W Peak Nominal Impedance 2 Ohms (Dual 4 Ohm Voice Coils) Frequency Response 31Hz – 200Hz Phase Control 0° / 180° Low-Pass Filter 50Hz – 200Hz Variable (-24 dB/Octave) Input Sensitivity High-Level: 0.5V – 10VRCA: 0.2V – 2.0V Enclosure Type Sealed Carpeted MDF Enclosure Dimensions 47.0 cm (W) x 28.3 cm (H) x 12.7 cm (D) Weight 9.7 kg What's Included 1 x Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer Integrated 400W RMS DSP Amplifier Power Connection Plug Adaptor Installation Hardware User Documentation Why Choose the Alpine PWV-SB10? Revolutionary OPTIM™Sync DSP bass optimisation technology Powerful 400W RMS integrated amplifier Compact slim-line enclosure ideal for limited installation space Deep, punchy bass that rivals larger enclosure designs Premium MDF cabinet with reinforced double-brace construction Compatible with factory and aftermarket audio systems Legendary Alpine sound quality, engineering and reliability Upgrade your vehicle audio system with the Alpine PWV-SB10 BassRev Powered Subwoofer and enjoy powerful low-frequency performance, exceptional clarity and immersive sound quality wherever your journey takes you.

Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer with 400W RMS Amplifier & OPTIM™Sync DSP Transform your driving experience with the Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer. Engineered with Alpine’s decades of acoustic expertise, this powerful subwoofer combines advanced DSP technology, premium construction, and high-output bass performance in a compact enclosure designed to fit a wide range of vehicles. Featuring Alpine’s revolutionary OPTIM™Sync technology and an integrated 400W RMS Class-D amplifier, the PWV-SB12 delivers deep, controlled bass response while maintaining exceptional clarity and musical accuracy. Designed to compete with larger full-size subwoofer enclosures, the PWV-SB12 produces impactful low-frequency performance without sacrificing valuable cargo space. Whether you're upgrading a factory audio system or enhancing an aftermarket setup, this powered subwoofer delivers the powerful bass your music deserves. Key Features 12" BassRev™ Slim-Line Powered Subwoofer engineered for powerful low-frequency performance. Integrated 400W RMS Class-D Amplifier with DSP processing for efficient, high-output sound. Exclusive OPTIM™Sync Technology dynamically optimises bass performance and tonal balance. Compact Shallow Enclosure Design allows flexible installation in a variety of vehicle applications. Sealed Enclosure Construction enhances bass punch, impact, and low-frequency accuracy. Premium Carpeted MDF Enclosure with double-brace structure for maximum rigidity and reduced resonance. Extended Protective Grille safeguards the woofer from cargo, pets, and daily wear. High-Level and RCA Inputs for easy integration with factory and aftermarket audio systems. Variable Low-Pass Filter, Gain Control, and Phase Adjustment for precise system tuning. Dual 4-Ohm Voice Coil Design for optimised performance and efficiency. Revolutionary OPTIM™Sync Technology At the heart of the BassRev Series is Alpine’s proprietary OPTIM™Sync bass optimisation algorithm. Preloaded into the integrated DSP amplifier, OPTIM™Sync intelligently applies dynamic bass enhancement and pre-EQ tuning specifically engineered for the PWV-SB12. This advanced processing safely extends low-frequency output, smooths frequency response, and maximises overall performance without sacrificing sound quality. The result is deeper, fuller bass that remains controlled, accurate, and musical at all listening levels. Integrated High-Power DSP Amplifier The built-in 400W RMS Class-D amplifier provides efficient power delivery while maintaining compact dimensions and low heat output. Advanced onboard controls allow seamless system integration and custom tuning for optimal sound performance. 400W RMS Power Output 800W Peak Power Handling Variable Low-Pass Filter Phase Control (0° / 180°) Gain Adjustment Selectable Turn-On Modes High-Level Speaker Inputs Low-Level RCA Inputs Premium MDF Enclosure Construction Built to withstand daily driving conditions, the PWV-SB12 features a robust carpeted MDF enclosure reinforced with a double-brace internal structure. This premium construction minimises unwanted vibrations and enclosure resonance, allowing the subwoofer to deliver clean, accurate bass even at high volume levels. An extended metal grille protects the woofer from accidental impacts while maintaining a clean, factory-style appearance. Groundbreaking X-Max Excursion Design The BassRev 12" subwoofer utilises a durable ultra-wide rubber surround that supports increased cone excursion and higher sound pressure levels. This advanced design allows the woofer to move more air while maintaining excellent control, resulting in deeper bass extension, improved impact, and exceptional clarity. Easy Integration with Factory & Aftermarket Systems The Alpine PWV-SB12 is designed for effortless integration with virtually any vehicle audio system. High-level speaker inputs allow installation in factory-equipped systems without requiring aftermarket head units, while RCA inputs provide simple connectivity to aftermarket processors and amplifiers. Its slim enclosure design allows flexible mounting options while preserving cargo space and maintaining a clean, professional installation. Technical Specifications Model Alpine PWV-SB12 Subwoofer Size 12 Inch (30.48 cm) Amplifier Type Integrated Class-D Amplifier with DSP RMS Power Handling 400W RMS Peak Power Handling 800W Peak Impedance 2 Ohms (Dual 4 Ohm Voice Coils) Frequency Response 31Hz – 200Hz Phase Control 0° / 180° Low-Pass Filter 50Hz – 200Hz Variable (-24 dB/Octave) Input Sensitivity High-Level: 0.5V – 10VRCA: 0.2V – 2.0V Enclosure Type Sealed MDF Enclosure Dimensions 53.3 cm (W) x 34.3 cm (H) x 16.8 cm (D) Weight 14.5 kg What's Included 1 x Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer Integrated 400W RMS DSP Amplifier Power Connection Plug Adaptor Installation Hardware User Documentation Why Choose the Alpine PWV-SB12? Advanced OPTIM™Sync DSP bass optimisation technology Powerful 400W RMS integrated amplifier Deep, punchy bass from a compact slim-line enclosure Premium MDF cabinet with reinforced construction Factory and aftermarket system compatibility Flexible installation for cars, SUVs, utes, and 4WDs Legendary Alpine sound quality and reliability Upgrade your vehicle's audio performance with the Alpine PWV-SB12 BassRev Powered Subwoofer and experience deeper bass, greater impact, and premium sound quality wherever the road takes you.

Unlock the full potential of your vehicle with the TORQIT ModuleMap — a powerful remote ECU tuning solution designed to safely increase performance, power, and torque without the need for a dyno. Remote ECU tuning – Optimise your vehicle straight from your driveway using a laptop with USB connection 3 selectable drive modes – Switch between Cruise, Sport, and Standard to suit your driving needs Cruise mode – Improved efficiency and torque, perfect for towing caravans, boats, or trailers Sport mode – Maximum performance output for increased power and responsiveness Standard mode – Revert back to factory settings anytime Custom calibration – Tailored to your vehicle and aftermarket mods like exhaust, snorkel, tyres and more Dyno-tested performance – Developed through extensive in-house dyno and road testing Safe and reliable – Maintains OEM safety parameters without pushing your engine beyond limits Noticeable gains – Enhanced throttle response, increased torque, and improved drivability How It Works TORQIT’s ModuleMap uses pre-developed dyno-tested data to remotely tune your vehicle. Each tune is built from a proven performance baseline, ensuring accurate and reliable results without requiring a physical dyno session. What to Expect Increased power and torque Better towing performance Improved overall driving experience Flexible tuning at your control Part Number VISMMP15

TORQIT ModuleMap 14 – Remote ECU Tuning Solution Part Number: VISMMP14 TORQIT’s ModuleMap is an ultra-fast and powerful ECU programming solution designed to remotely calibrate and optimise your vehicle’s factory settings. Built from extensive dyno-tested data, ModuleMap enhances your vehicle’s performance while maintaining OEM safety and reliability. Key Features Remote ECU tuning – no workshop visit required Noticeable increase in power and torque Improved performance for towing caravans, boats, and trailers Maintains factory safety limits and reliability Customised tuning based on your vehicle’s modifications 3 Driving Modes Cruise Mode: Optimised for everyday driving and towing heavy loads Sport Mode: Maximum performance for enhanced power and torque Standard Mode: Reverts your vehicle back to factory settings How It Works ModuleMap allows you to remap your vehicle directly from your driveway using a simple plug-and-play setup. Your vehicle is remotely tuned by experienced software technicians with over 40 years of combined industry experience. Dyno-Tested Performance All TORQIT tunes are developed and stress-tested on a dynamometer (dyno), simulating real driving conditions. Each vehicle platform undergoes approximately 20 hours of R&D, including testing with aftermarket modifications such as exhaust systems, snorkels, and turbos. This ensures every tune is precise, reliable, and tailored to your vehicle. Customised for Your Vehicle ModuleMap adapts to your specific setup, including modifications like exhaust systems, tyres, and snorkels. It also allows control over when peak power is delivered, ensuring optimal performance across different driving conditions. Safe & Reliable TORQIT tuning solutions are engineered to stay within your vehicle’s safe operating limits. You can expect increased performance without compromising reliability or longevity.

TORQIT Performance Exhaust Manifold – SUZUKI JIMNY 2018+ Designed specifically for SUZUKI JIMNY models (XL 5-Door, GLX & Lite 3-Door), TORQIT’s Performance Exhaust Manifold replaces the restrictive factory unit to deliver improved exhaust flow, increased power, and enhanced engine efficiency. Developed over 5 years, this high-performance manifold is engineered to reduce back pressure and improve overall engine performance—perfect for drivers looking to maximise power or reduce engine strain when towing or under load. Key Benefits Increased exhaust flow for improved power and torque Reduced engine strain under load or towing conditions Enhanced exhaust note and efficiency Direct replacement for factory manifold Premium Construction Manufactured in Australia, TORQIT Performance Headers are mandrel bent from premium-grade steel. Unlike restrictive cast iron factory manifolds, the smooth and consistent pipe diameter ensures unrestricted airflow and improved performance. Mandrel bent steel for maximum flow and precision fitment Consistent pipe diameter reduces back pressure High-quality construction for long-term durability Turbo X Ceramic Coating Each manifold is coated with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves longevity and performance Installation & Compatibility Bolt-on installation Compatible with SUZUKI JIMNY 2018+ (XL, GLX, Lite) Recommended Upgrade For maximum performance gains and a deeper, more aggressive exhaust note, pair this manifold with a TORQIT Cat-Back Exhaust System. Warranty & Origin 3-year product warranty Proudly made in Australia

TORQIT Performance Exhaust Headers – CHEVROLET SILVERADO 2020+ Part Number: TPH03 Upgrade your CHEVROLET SILVERADO with TORQIT’s Performance Exhaust Headers, designed to replace the restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide a noticeable improvement in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Silverado headers feature a long tube design, where the pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports better fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance gains, pair these headers with a TORQIT Silverado Performance Exhaust System. Designed with a single 3.5" pipe into twin 3" tailpipes, it delivers a powerful V8 note without cabin drone. Warranty & Origin Made in Australia Engineered for long-term performance and reliability

TORQIT Performance Exhaust Headers – DODGE RAM DT 5.7L (2019+) Part Number: TPH02 Upgrade your DODGE RAM DT with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT RAM headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with a TORQIT Performance Exhaust System to eliminate restriction and achieve optimal power, torque, and sound. Installation Professional installation recommended Bolt-on fitment compatible with factory components Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: DODGE RAM DT 5.7L Year: 2019+

TORQIT Performance Exhaust Headers – NISSAN PATROL Y62 5.6L (2013+) Part Number: TPH01 Upgrade your NISSAN PATROL Y62 with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Y62 headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with TORQIT Y62 Patrol Performance Exhaust and High Flow Catalytic Converters to eliminate restriction and achieve optimal power, torque, and sound. Installation Estimated installation time: 5–6 hours Professional installation recommended (requires hoist and mechanical expertise) Bolt-on fitment compatible with factory components Important Notes Installing headers on the Y62 Patrol removes primary catalytic converters and may trigger O2 sensor warning lights. An ECU tune such as TORQIT ModuleMap is recommended to prevent this. Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: NISSAN PATROL Y62 5.6L Series: Series 1–5 (2013+) Weight: 11 kg

TORQIT Stainless Steel Snorkel – TOYOTA LANDCRUISER 300 SERIES Part Number: SN12SS TORQIT’s Stainless Steel Snorkel is a fully sealed, one-piece construction designed to maximise airflow and protect your engine in harsh conditions. Australian-designed and rigorously tested, it is built to handle demanding off-road environments. By elevating your vehicle’s air intake, the snorkel improves air quality entering the engine, resulting in better performance, efficiency, and potential fuel savings. It also acts as essential protection when driving through dust or water crossings, reducing engine wear and extending vehicle lifespan. Key Benefits Improved engine performance and airflow Protection against dust and water ingestion Reduced engine wear and maintenance Enhanced fuel efficiency and longevity Premium Stainless Steel Construction Manufactured from 304 grade stainless steel, each snorkel is mandrel bent from a single piece to ensure a fully sealed unit with no joins. The smooth internal diameter maximises airflow, while the streamlined external design reduces snagging when off-road. Mandrel bent one-piece construction Fully sealed design for maximum protection High structural rigidity for extreme conditions Corrosion-resistant and temperature stable Designed for Australian Conditions Tested in harsh environments, TORQIT snorkels maintain strength in extreme temperatures without warping or corroding. The durable construction ensures long-term reliability for serious off-road use. Features Heavy-duty stainless steel with strong mounting brackets Choice of brushed stainless or satin black powder coat finish DIY installation with vehicle-specific fitting template Includes rust-proof paint for guard cut and rubber pinch weld Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Compatible with factory or TORQIT stainless steel airbox Works with most roof racks and light bars Warranty 5-year product warranty Does not void factory vehicle warranty Why Upgrade? Upgrading to a TORQIT Stainless Steel Snorkel enhances airflow, improves engine efficiency, and adds a durable, premium look to your vehicle—making it an essential upgrade for off-road and touring setups.

3" TO 4" PERFORMANCE EXHAUST WITH 650MM EXTENSION FOR TOYOTA LANDCRUISER 200 SERIES (WITH DPF) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or driving off-road. Offer available while stocks last. Enhance the performance and efficiency of your Toyota LandCruiser 200 Series with TORQIT's premium 3" to 4" Performance Exhaust featuring a 650mm extension section. Specifically designed for vehicles equipped with a Diesel Particulate Filter (DPF), this premium exhaust system improves airflow, lowers exhaust gas temperatures (EGTs), and delivers a deeper exhaust note while maintaining excellent drivability. Manufactured from premium stainless steel, this heavy-duty exhaust system is built to withstand Australia's demanding touring, towing and off-road conditions. The larger diameter design allows exhaust gases to flow more efficiently, helping your engine perform at its best whether towing a caravan, tackling challenging terrain or covering long distances. KEY FEATURES 3" to 4" performance exhaust system 650mm extension section included Designed for Toyota LandCruiser 200 Series models fitted with a DPF Improves exhaust flow and engine efficiency Helps reduce exhaust gas temperatures (EGTs) Premium stainless steel construction Corrosion-resistant finish for long-term durability Heavy-duty design for towing, touring and off-road use Bolt-on installation for straightforward fitment Engineered for reliable long-term performance PERFORMANCE BENEFITS Improved exhaust flow Enhanced engine responsiveness Reduced exhaust gas temperatures (EGTs) Improved towing performance Deep, refined exhaust note Built for demanding Australian conditions VEHICLE COMPATIBILITY Toyota LandCruiser 200 Series Vehicles equipped with a Diesel Particulate Filter (DPF) INSTALLATION This exhaust system features a bolt-on design for simplified installation. Professional fitting is recommended to ensure correct alignment and optimum performance. IMPORTANT INFORMATION Please confirm vehicle compatibility before ordering, particularly if your vehicle has aftermarket accessories or modifications. Contact our team if you require assistance selecting the correct exhaust system for your LandCruiser.

TORQIT Twin Exit Stainless Steel Turbo Back Performance Exhaust for Toyota LandCruiser 200 Series 4.5L (11/2007 - 09/2015) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. Transform the performance, sound and appearance of your Toyota LandCruiser 200 Series with TORQIT's premium Twin Exit Stainless Steel Turbo Back Performance Exhaust. Designed specifically for the 4.5L V8 Turbo Diesel, this heavy-duty exhaust system delivers substantial gains in power and torque while producing the deep V8 note that LandCruiser owners love. Manufactured in Australia from premium 304-grade stainless steel up to 2mm thick, this twin exit system is engineered for demanding towing, touring and off-road conditions. Featuring dual rear outlets, mandrel-bent tubing and premium construction throughout, it offers outstanding durability, improved exhaust flow and a distinctive rear appearance. Performance Gains Power Increase: Up to 26kW Torque Increase: Up to 94Nm Reduced Exhaust Gas Temperatures (EGTs) Improved Turbo Efficiency Enhanced Towing and Touring Performance Deep V8 Exhaust Note Key Features Twin exit turbo back performance exhaust system Dual left and right rear exit configuration Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel-bent system TIG welded construction Internal and external welds for maximum strength Three-bolt laser-cut flanges Heavy-duty wrap-around mounting brackets Titanium-coated dump pipes to assist heat dispersion High-flow diesel catalytic converter Double-braided stainless steel flex bellows Stainless steel resonator/muffler Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Built for Australian Conditions Designed and tested in some of Australia's toughest environments, this exhaust system combines thick-wall stainless steel construction, precision TIG welding and mandrel-bent tubing to maximise durability and performance. The twin exit configuration follows the factory exhaust path and exits on both sides of the vehicle, creating a distinctive appearance and exhaust note. High-flow catalytic converters, titanium-coated dump pipes and premium flex bellows work together to improve exhaust flow, reduce heat build-up and support long-term engine reliability. The result is a system engineered to help your LandCruiser perform at its best both on and off the road. Vehicle Compatibility Toyota LandCruiser 200 Series 4.5L V8 Turbo Diesel 11/2007 – 09/2015 Suitable for GX, GXL, VX, Sahara and Horizon models Compatible with KDSS suspension Installation This exhaust system includes detailed fitting instructions and features a bolt-together design. Installation typically takes approximately 3–4 hours. Due to the complexity of turbo-back twin-exit systems, professional installation on a hoist is recommended. Additional Compatibility Information This twin exit system has been designed to work with KDSS-equipped vehicles and a range of 200 Series variants. If your vehicle is fitted with additional aftermarket accessories, please contact our team prior to ordering to confirm compatibility. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and coating are completed to order and may require additional processing time before dispatch.

TORQIT 3.5" Turbo Back Stainless Steel Exhaust for Toyota LandCruiser 79 Series 4.5L TD Dual Cab (08/2012 - 07/2016) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. Upgrade your Toyota LandCruiser 79 Series Dual Cab with TORQIT's premium 3.5-inch Turbo Back Stainless Steel Exhaust System. Designed specifically for the 4.5L V8 Turbo Diesel, this high-performance exhaust delivers substantial gains in power and torque while producing the deep V8 note that LandCruiser owners love. Manufactured in Australia from premium 304-grade stainless steel up to 2mm thick, this heavy-duty exhaust system is built to handle demanding towing, touring and off-road conditions. The larger 3.5-inch diameter improves exhaust flow and engine efficiency, while premium components ensure long-term durability in harsh Australian environments. Performance Gains Power Increase: Up to 23kW Torque Increase: Up to 91Nm Reduced Exhaust Gas Temperatures (EGTs) Improved Turbo Efficiency Enhanced Towing and Touring Performance Deep V8 Exhaust Note Key Features 3.5-inch turbo back exhaust system Straight-through configuration for maximum exhaust flow and sound Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel-bent system TIG welded construction Laser-cut flanges welded internally and externally Heavy-duty wrap-around mounting brackets Titanium-coated dump pipes to assist heat dispersion High-flow diesel catalytic converter Double-braided stainless steel flex bellows DIY bolt-together installation Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Built for Australian Conditions Designed and tested in some of Australia's toughest environments, this exhaust system combines thick-wall stainless steel construction, precision TIG welding and mandrel-bent tubing to maximise durability and performance. The larger 3.5-inch diameter allows your engine to breathe more freely while producing an aggressive V8 exhaust note. High-flow catalytic converter technology, titanium-coated dump pipes and premium flex bellows work together to improve exhaust flow, reduce heat build-up and support long-term reliability for serious touring, towing and off-road applications. Vehicle Compatibility Toyota LandCruiser 79 Series Dual Cab 4.5L V8 Turbo Diesel 08/2012 – 07/2016 SKU: HS8132SS S/T Installation This exhaust system features a DIY bolt-together design and includes a complete fitting kit. Installation typically takes approximately three hours using standard workshop tools and can be completed without requiring a hoist. Additional Compatibility Information This system is compatible with selected long-range fuel tanks including LRA, Long Ranger, Frontier Long Range and Brown Davis Long Ranger fuel tanks. If your vehicle is fitted with additional aftermarket accessories, please contact our team prior to ordering to confirm compatibility. Toolbox Clearance: Vehicles fitted with a toolbox require a minimum clearance of 165mm measured from the inside wall of the tray to ensure correct exhaust fitment. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and coating are completed to order and may require additional processing time before dispatch.

TORQIT 3.5" Stainless Steel Turbo Back Performance Exhaust for Toyota LandCruiser 79 Series 4.5L TD Dual Cab (08/2012 - 07/2016) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. Unlock the full potential of your Toyota LandCruiser 79 Series Dual Cab with the TORQIT 3.5" Stainless Steel Turbo Back Performance Exhaust. Designed specifically for the 4.5L V8 Turbo Diesel, this premium exhaust system delivers substantial gains in power and torque while producing the aggressive V8 exhaust note that LandCruiser enthusiasts demand. Manufactured in Australia from premium 304-grade stainless steel up to 2mm thick, this heavy-duty exhaust system is engineered to withstand harsh touring, towing and off-road conditions. The larger 3.5-inch diameter improves exhaust flow and engine efficiency while maintaining the durability required for Australia's toughest environments. Performance Gains Power Increase: Up to 23kW Torque Increase: Up to 91Nm Improved Exhaust Flow Reduced Exhaust Gas Temperatures (EGTs) Enhanced Towing and Touring Performance Deep V8 Exhaust Note Key Features 3.5-inch turbo back performance exhaust system Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel-bent system TIG welded construction Three-bolt laser-cut flanges welded internally and externally Heavy-duty wrap-around mounting brackets Titanium-coated dump pipes to assist heat dispersion High-flow exhaust design Double-braided stainless steel flex bellows Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Built for Australian Conditions Designed and tested in demanding Australian conditions, this performance exhaust combines thick-wall stainless steel construction, precision TIG welding and mandrel-bent tubing to maximise durability and performance. The larger 3.5-inch pipe diameter allows the engine to breathe more freely, improving responsiveness and supporting increased power output. Titanium-coated dump pipes assist with heat management by helping disperse heat more efficiently, while premium double-braided flex bellows reduce stress on the exhaust system and absorb vehicle movement during off-road use. Vehicle Compatibility Toyota LandCruiser 79 Series Dual Cab 4.5L V8 Turbo Diesel 08/2012 – 07/2016 SKU: HS8132SS / DD Installation This exhaust system includes a complete fitting kit and features a bolt-together design for straightforward installation. Installation typically takes approximately three hours using standard workshop tools and can be completed without requiring a hoist. Additional Compatibility Information This system is compatible with selected long-range fuel tanks including LRA, Long Ranger, Frontier Long Range and Brown Davis Long Ranger fuel tanks. If your vehicle is fitted with additional aftermarket accessories, please contact our team prior to ordering to confirm compatibility. Toolbox Clearance: Vehicles fitted with a toolbox require a minimum clearance of 165mm measured from the inside wall of the tray to ensure correct exhaust fitment. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and coating are completed to order and may require additional processing time before dispatch.

3.5″ SINGLE EXIT TURBO BACK EXHAUST FOR TOYOTA 79 SERIES 4.5L SINGLE CAB LANDCRUISER: 03/2007 – 07/2016 PERFORMANCE GAIN: 23KW / 91NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling demanding off-road conditions. Offer available while stocks last. The Toyota 79 Series Single Cab is built to tackle Australia's toughest conditions, and TORQIT's 3.5" Single Exit Turbo Back Performance Exhaust is engineered to unlock its full potential. Designed for the 4.5L V8 Turbo Diesel, this premium exhaust delivers substantial gains in power and torque while producing a deep, unmistakable V8 exhaust note. Manufactured from premium 304 grade brushed stainless steel, the fully mandrel bent system features tubing up to 2mm thick for exceptional strength and corrosion resistance. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally to withstand serious towing, touring and off-road use. Running from the turbo back to the rear of the vehicle, the system incorporates a high-flow diesel catalytic converter, double braided stainless steel flex bellows and exclusive titanium-coated dump pipes. Together these components improve exhaust flow, reduce exhaust gas temperatures (EGTs), improve engine efficiency and protect critical engine components during demanding conditions. KEY FEATURES 3.5" Turbo Back Single Exit Performance Exhaust Performance gain of up to 23KW / 91NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Three-bolt laser-cut flanges Heavy-duty wrap-around brackets High-flow diesel catalytic converter Titanium-coated dump pipes for improved heat management Double braided stainless steel flex bellows Stainless steel resonator/muffler Deep V8 exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can typically be installed in approximately two hours using a basic socket set and spanners. No hoist is required for installation. TOOLBOX CLEARANCE If your vehicle is fitted with a toolbox, allow a minimum clearance of 165mm measured from the inside wall of the tray to ensure correct exhaust fitment. VEHICLE COMPATIBILITY Toyota LandCruiser 79 Series 4.5L Single Cab (03/2007 – 07/2016) Compatible with LRA, Long Ranger, Frontier Long Range and Brown Davis Long Range fuel tanks Please Note: If your vehicle has additional aftermarket accessories, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch.

TORQIT 3" Turbo Back Exhaust for Toyota LandCruiser 100 Series 4.2L TD (03/1998 - 08/2007) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. Improve the performance, sound and efficiency of your Toyota LandCruiser 100 Series 4.2L Turbo Diesel with Torqit's premium 3-inch Turbo Back Exhaust System. Designed to bolt directly to the turbo, this performance exhaust delivers increased power and torque while reducing exhaust gas temperatures (EGTs) for improved engine efficiency and drivability. Manufactured from premium 304-grade stainless steel, this heavy-duty exhaust system is built to handle demanding Australian touring, towing and off-road conditions. Featuring mandrel-bent tubing, laser-cut flanges and robust mounting hardware, it provides long-term durability and a deep exhaust note without compromising reliability. Performance Gains Power Increase: Up to 19kW Torque Increase: Up to 88Nm Reduced Exhaust Gas Temperatures (EGTs) Improved Engine Breathing and Efficiency Enhanced Towing and Touring Performance Deep Exhaust Note Key Features 3-inch turbo back exhaust system Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel-bent design for improved exhaust flow Internal and external welds on flanges for added strength 10mm laser-cut flanges Heavy-duty mounting brackets DIY bolt-together installation Designed for towing, touring and off-road applications Fits with many major aftermarket accessories (contact us to confirm compatibility) Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Vehicle Compatibility Toyota LandCruiser 100 Series 4.2L Turbo Diesel 03/1998 – 08/2007 Installation This exhaust system features a bolt-together design for straightforward installation. All major components are engineered for precise fitment, making it suitable for DIY installation using standard workshop tools. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and coating are completed to order and may require additional processing time before dispatch.

TORQIT 3" Turbo Back Exhaust for Toyota Prado 120 Series 3.0L (02/2003 - 10/2007) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. Unlock improved performance, efficiency and a deeper exhaust note with the TORQIT 3" Turbo Back Exhaust for the Toyota Prado 120 Series 3.0L Turbo Diesel. Designed to bolt directly to the rear of the turbocharger, this premium stainless steel exhaust system improves exhaust flow to deliver increased power, enhanced torque and reduced Exhaust Gas Temperatures (EGTs). Manufactured from premium 304-grade stainless steel and engineered for Australian touring, towing and off-road conditions, this system combines durability, performance and reliability in one complete package. Featuring mandrel-bent tubing, TIG-welded construction and heavy-duty mounting hardware, it is built to perform wherever your Prado takes you. Performance Gains Power Increase: Up to 10kW Torque Increase: Up to 31Nm Reduced Exhaust Gas Temperatures (EGTs) Improved Exhaust Flow and Turbo Efficiency Enhanced Towing and Touring Performance Deep Exhaust Note Without Cabin Drone Key Features 3-inch turbo back exhaust system Premium 304-grade stainless steel construction Brushed stainless steel tubing Fully mandrel-bent design for unrestricted exhaust flow TIG-welded construction for maximum strength Laser-cut flanges welded internally and externally Heavy-duty mounting brackets Titanium-coated dump pipes to assist heat dispersion* High-flow diesel-specific catalytic converter Deep exhaust note without excessive cabin drone Bolt-together installation design Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Engineered for Performance and Durability TORQIT uses thick brushed stainless steel and precision manufacturing techniques to ensure long-term durability in demanding conditions. The fully mandrel-bent system maintains a consistent internal diameter throughout the exhaust, improving gas flow and reducing restriction to help maximise engine efficiency. Premium TIG-welded construction, internally and externally welded flanges, and heavy-duty brackets provide additional strength and resistance to cracking, making this exhaust ideal for touring, towing and off-road use. Vehicle Compatibility Toyota Prado 120 Series 3.0L Turbo Diesel 02/2003 – 10/2007 SKU: HS8111PCRSS Installation The system features a straightforward bolt-together design for easier installation. Before ordering, please consider any aftermarket accessories fitted to your vehicle, including long-range fuel tanks, suspension upgrades or other modifications. Contact our team if you would like assistance confirming compatibility. Important Information Please Note: This is a manufactured-to-order product. While key components may be kept in stock, final assembly and coating are completed to order and may require additional time before dispatch. *Some engines require a cast dump pipe. In these cases, a cast component will be supplied instead of a titanium-coated stainless steel dump pipe.

3" Single Exit Performance Exhaust for Toyota LandCruiser 79 Series Dual Cab (08/2012 - 07/2016) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. Upgrade your Toyota LandCruiser 79 Series Dual Cab with Torqit's premium 3-inch Single Exit Performance Exhaust. Designed specifically for the 4.5L V8 turbo diesel engine, this heavy-duty exhaust system delivers improved performance, enhanced towing capability and the deep V8 note Torqit is renowned for. Manufactured in Australia from premium 304-grade stainless steel up to 2mm thick, this mandrel-bent exhaust system is engineered to withstand harsh off-road conditions, long-distance touring and demanding towing applications. The turbo-back design incorporates high-flow diesel catalytic converters, titanium-coated dump pipes and double-braided flex bellows to maximise exhaust flow while reducing stress on the system. Performance Gains Power Increase: Up to 17kW Torque Increase: Up to 79Nm Improved Exhaust Flow Reduced Exhaust Gas Temperatures (EGTs) Deep Exhaust Note Without Cabin Drone Key Features 3-inch single exit turbo-back exhaust system Premium 304-grade stainless steel construction Tube thickness up to 2mm for maximum durability Fully mandrel-bent design for unrestricted flow TIG welded internally and externally Three-bolt laser-cut flanges Heavy-duty wrap-around mounting brackets Stainless steel resonator and muffler Double-braided stainless steel flex bellows Titanium-coated dump pipes for improved heat management High-flow diesel-specific catalytic converter Brushed stainless steel finish with laser-cut Torqit badge DIY bolt-together installation Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Why Choose Torqit? Torqit's exhaust systems are among the thickest mandrel-bent exhausts manufactured in Australia. Using premium 304-grade stainless steel and precision TIG welding, every component is engineered for superior strength, corrosion resistance and long-term reliability. The result is an exhaust system built to handle demanding Australian touring, towing and off-road conditions. The inclusion of titanium-coated dump pipes helps disperse heat more efficiently, reducing engine bay temperatures and supporting engine longevity. Combined with Torqit's high-flow catalytic converter technology, this system improves engine breathing while remaining road legal. Vehicle Compatibility Toyota LandCruiser 79 Series Dual Cab 4.5L V8 Turbo Diesel 08/2012 – 07/2016 Installation This exhaust system features a DIY bolt-together design and includes a complete fitting kit. Installation typically takes approximately one hour using basic hand tools and does not require a hoist. Important Information This exhaust is compatible with selected long-range fuel tanks including LRA, Long Ranger, Frontier Long Range and Brown Davis Long Ranger fuel tanks. If your vehicle is fitted with additional aftermarket accessories, please contact our team prior to ordering to confirm compatibility. Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and coating are completed to order and may require additional processing time before dispatch.