All 4WD Parts and Accessories

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 954mm/37.6" (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 1000mm/39.4" long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA006T - Truck Canopy/Trailer SLII Rack Kit 1345(W)x954(L)Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x RRSTG05 - SLII Tray - 1345mm(W)X954mm(L)1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 19.03kg (41.95lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 280mm (11")Shipping Weight:Weight: 24kg (53lbs)

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9" (W) x 1358mm/53.5" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: Slot base width min 20mm / max 25mm Slot base height min 6.5mm / max 10mm Slot opening width min 8.5mm / max 10.5mm Slot opening height min 2mm / max 5mm **Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA005TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1358mm(L) - by Front Runner Consisting of: 3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 20kg (44lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 23.1kg (50.9lbs)

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9" (W) x 1156mm/45.5" (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: Slot base width min 20mm / max 25mm Slot base height min 6.5mm / max 10mm Slot opening width min 8.5mm / max 10.5mm Slot opening height min 2mm / max 5mm **Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA004TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1156mm(L) - by Front Runner Consisting of 2 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 18kg (39lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 20.7kg (45.6lbs)

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9" (W) x 1156mm/45.5" (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 1150mm/45.3" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRCA004T - Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 1156mm(L) - by Front Runner Consisting of: 2 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner1 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner  Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 20kg (43lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 22.9kg (50.4lbs)

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9" (W) x 1560mm/61.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: Slot base width min 20mm / max 25mm Slot base height min 6.5mm / max 10mm Slot opening width min 8.5mm / max 10.5mm Slot opening height min 2mm / max 5mm **Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA001TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1560mm(L) - by Front Runner Consisting of: 3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTA08 - Slimline II Tray - 1165mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 21kg (47lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6")Shipping Weight: Weight 25.0kg (55.0lbs)

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 1400mm/55.1" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty* KRCA001T - Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 1358mm(L) - by Front RunnerConsisting of:3x FASS024 - Foot Set / 50mm - 60mm1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)1x TRAC002 - Universal Track / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.89kg (57.08lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 265mm (10")Shipping Weight:Weight: 29kg (64lbs)

Front Runner Cargo Slide / Fridge Slide 80L–90L The Front Runner Cargo Slide / Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide quick and convenient access to larger portable fridges, camping equipment, toolboxes, and adventure gear. Ideal for 4WDs, canopies, ute trays, drawer systems, and touring vehicles, the slide maximises accessibility while maintaining a compact footprint. Built with high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, allowing easy access to equipment without climbing into your vehicle. The rattle-free design keeps your cargo secure during travel, while the clip latch locking system prevents unwanted movement when closed. Constructed from durable black powder-coated steel and featuring a hold-open mechanism for uneven terrain, the Front Runner Cargo Slide is engineered for demanding off-road, touring, camping, and worksite environments. Features Suitable for 80L–90L portable fridges High-strength bearing drawer slide mechanism Nearly 100% tray extension for easy access Rattle-free design during travel Clip latch locking system Hold-open mechanism for uneven surfaces Mounts to most flat surfaces Compatible with Front Runner Drawer Systems Pre-drilled mounting holes for simple installation Includes mounting hardware for wood and metal surfaces Heavy-duty black powder-coated steel construction Ideal for fridges, storage boxes, tools, and touring equipment Specifications Overall / Closed Dimensions: 942mm x 578mm x 85mm Open Dimensions: 1858mm x 578mm x 85mm Internal Dimensions: 884mm x 507mm x 64mm Weight: 18.2kg Load Rating: 113kg (250lbs) Material: Black Powder-Coated Steel What's Included 1 x Front Runner Cargo Slide Installation Hardware Fitting Instructions Frequently Asked Questions What fridge sizes will fit this Front Runner Cargo Slide? This model is designed for many popular portable fridges in the 80L–90L range. We recommend comparing your fridge dimensions with the tray measurements before purchasing. Can this Cargo Slide be installed in a canopy, ute tray, or drawer system? Yes. The slide can be mounted to most suitable flat surfaces, including canopies, ute trays, drawer systems, and touring vehicle storage setups. Does the slide lock securely during travel? Yes. The integrated clip latch locking system and rattle-free design help keep your fridge and equipment secure while driving on-road and off-road. Note: Fridges, storage containers, and accessories shown are sold separately.

Long gone are the days of scheduling unnecessary fuel water separator inspections. Traditionally pre-filters rely on a visual inspection of the bowl and draining when full. With the NEW Ryco S102XK Fuel Pre-Filter Sensor Kit, simply log into the Ryco Connect App or let the Ryco Bluetooth Sensor Indicator let you know when it’s time to drain the unit. All of this adds an extra layer of protection for your diesel engine’s sensitive fuel system. The Ryco S102XK Pre-Filter Sensor Kit comes with all the parts necessary for users to be notified instantly by the Ryco Connect App when it is time to inspect and drain the unit, eliminating unnecessary visual assessments. Having a fuel water separator can assist your vehicle’s fuel system by filtering water and particulates before they ever reach the fuel filter, however, this is only working if the fuel water separator itself is clean and serviced regularly. What the Ryco Fuel Water Separator Sensor Kit does is support this line of defence, providing additional assurance to 4×4 owners that their engine health is protected by being better aware of what the fuel water separator’s servicing needs are. Ryco has also introduced the S101X Bluetooth Sensor Indicator, a hands-free optional accessory to accompany the Fuel Water Separator Sensor Kit, providing an in-cabin audio-visual alert notifying drivers when it is time to service their fuel water separator. The Bluetooth Sensor Indicator is powered by the traditional auxiliary 12/24V power adaptor or modern USB-A port and will operate even when the Fuel Water Separator Sensor Kit is connected to the Ryco Connect app, never interfering with app notifications if you are wanting to use both. BENEFITS OF A RYCO PRE-FILTER KIT: Be notified instantly through the Ryco Connect App when it’s time to drain the unit Remote filter monitoring via Bluetooth Connect remotely to your smartphone with the Ryco Connect app or in the cabin with the Ryco Bluetooth Sensor Indicator Easy Installation. No drilling through the firewall to run wires Fits all common fuel water separator brand filters (Adapters included) Kit comes with fuse taps to provide ignition-on power rather than wiring a separate circuit Expandable, system allows for the connection of 2 sensors IP67 rated to resist dust and water protection against harsh driving conditions Suitable for 12/24 volt systems with automatic voltage detection S102XK PRE-FILTER ADAPTORS: The S102XK Kit comes with various adaptors to suit upgrades to all RYCO Pre-Filters and other popular fuel pre-filters. All adaptors also come with a built-in drain, allowing you to simply drain water from the fuel system. ADAPTORS COMPATIBLE WITH: Ryco Z980, Z980S, Z981, Z982 Series Fuel Manager 31863, 31871 & 36693 Mann+Hummel Preline PL150 Dolandson P551615, P550588 & P551426 Stanadyne 37281 Fleetguard FS1069 Baldwin BF7956D NAPA 3694 WIX 33694

PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION   Direction-Plus™ Universal ProVent® Ultimate Catch Can only (PV200DP) kit comes with: Inc Provent 200 Element  It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. It also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance. DOESN’T VOID YOUR WARRANTY! If you are wondering about your vehicle’s warranty, you don’t need to worry about it, because this kit doesn’t void any vehicle’s warranties. You can read an article from AAAA about Genuine Parts and Vehicle Warranty HERE. Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DP: • Up to 200 l/min blow-by gas • Very compact design • Available with high-efficiency or ultra-efficiency medium • Integrated pressure regulation for crankcase • Also available with bypass valve (integrated in separation element) • Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle • Suitable for use with open or closed CCV system • Check valve for oil return available (recommended)

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! Direction Plus™ Fuel Manager Pre-Filter + Provent Ultimate Catch Can Dual Kit – FMPV664DPK is designed and engineered in Australia to suit: Ford Everest YNWS (2.0L 4cyl) 2018-2022 Ford Ranger YNWS (2.0L 4cyl) 2019-2022 HOW DOES IT WORK? FUEL MANAGER PRE-FILTER Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! The Direction-Plus™ Fuel Manager Pre-Filter + Provent Ultimate Catch Can Dual Kit – FMPV642DPK is designed and engineered in Australia to suit: Toyota Landcruiser 70 series 1GD-FTV (2.8L 4cyl) 2023 – On HOW DOES IT WORK? FUEL MANAGER PRE-FILTER Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

The Direction-Plus™ PreLine-Plus / Provent Dual Kit FMPV642DPK fits Toyota Landcruiser 70 series (2018-2021) models. It’s the ultimate defence against carbon build-up and water contamination with the Fuel Manager pre-filter kit and up to 98% oil separation efficiency with our ProVent kit. With this dual kit you can‘t go wrong! Protect your investment 24 hours a day, 365 days a year. HOW IT WORKS FUEL MANAGER Direction Plus™ Pre-Fuel Filter will be installed between the fuel tank and the O.E.M fuel filter which will remove the majority of water and particle contamination, leaving the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. PROVENT OIL SEPARATOR Direction Plus™ ProVent oil separator protects your diesel engine by reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus™ ProVent system is specifically designed to separate and redirect oil and air from blow-by gas produced from within the crankcase as it also provides the option of returning the oil back to the sump

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Combo Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Ultimate Catch Can Combo Kit – FMPV635DPC is designed and engineered in Australia to suit: Toyota Land Cruiser 300 Series (V6 Diesel F33A-FTV) 2022 – On Please note: Fuel Filters not compatible with Kaymar rear bar HOW DOES IT WORK? FUEL MANAGER PRE-FILTER Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Combo Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Ultimate Catch Can Combo Kit – FMPV613DPC is designed and engineered in Australia to suit: Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2011-2015 Vehicles with updated master cylinder only (with VSC) HOW DOES IT WORK? FUEL MANAGER PRE-FILTER Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Dual Kit. This is the Ultimate Defence against water contamination, costly injector failure, carbon build-up and reduced performance. Our PreLine-Plus offers up 100% water separation efficiency* and our Provent Catch Can offers up to a massive 98% oil separation efficiency. With this dual kit you can‘t go wrong! The Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Dual Kit – PLPV648DPK is designed and engineered in Australia to suit: Toyota Landcruiser 70 series 1GD-FTV (2.8L 4cyl) 2023 – On HOW DOES IT WORK? PRELINE-PLUS PRE-FILTER PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. For the first line of defence against water and particle contamination, investing in a Direction-Plus™ PreLine-Plus system will protect your investment 24 hours a day, 365 days a year. With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter' PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money *Only in installations where the oil is returned to the sump  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Combo Kit. This is the Ultimate Defence against water contamination, costly injector failure, carbon build-up and reduced performance. Our PreLine-Plus offers up 100% water separation efficiency* and our Provent Catch Can offers up to a massive 98% oil separation efficiency. With this dual kit you can‘t go wrong! The Direction-Plus™ PreLine-Plus Pre-Filter + ProVent Ultimate Catch Can Combo Kit – PLPV635DPC is designed and engineered in Australia to suit: Toyota Land Cruiser 300 Series (V6 Diesel F33A-FTV) 2022 – On Please note: Fuel Filters not compatible with Kaymar rear bar HOW DOES IT WORK? PRELINE-PLUS PRE-FILTER PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. For the first line of defence against water and particle contamination, investing in a Direction-Plus™ PreLine-Plus system will protect your investment 24 hours a day, 365 days a year. With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter' PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money *Only in installations where the oil is returned to the sump  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Combo Kit. This is the Ultimate Defence against water contamination, costly injector failure, carbon build-up and reduced performance. Our PreLine-Plus offers up 100% water separation efficiency* and our Provent Catch Can offers up to a massive 98% oil separation efficiency. With this dual kit you can‘t go wrong! The Direction-Plus™ PreLine-Plus Pre-Filter + ProVent Ultimate Catch Can Combo Kit – PLPV614DPC is designed and engineered in Australia to suit: Toyota Land Cruiser 200 series 1VD-FTV (4.5L 8cyl) 2007-2022. HOW DOES IT WORK? PRELINE-PLUS PRE-FILTER PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. For the first line of defence against water and particle contamination, investing in a Direction-Plus™ PreLine-Plus system will protect your investment 24 hours a day, 365 days a year. With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter' PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money *Only in installations where the oil is returned to the sump  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Combo Kit. This is the Ultimate Defence against water contamination, costly injector failure, carbon build-up and reduced performance. Our PreLine-Plus offers up 100% water separation efficiency* and our Provent Catch Can offers up to a massive 98% oil separation efficiency. With this dual kit you can‘t go wrong! The Direction-Plus™ PreLine-Plus Pre-Filter + ProVent Ultimate Catch Can Combo Kit – PLPV613DPC is designed and engineered in Australia to suit: Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2011-2015 Vehicles with updated master cylinder only (with VSC) HOW DOES IT WORK? PRELINE-PLUS PRE-FILTER PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. For the first line of defence against water and particle contamination, investing in a Direction-Plus™ PreLine-Plus system will protect your investment 24 hours a day, 365 days a year. With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter' PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money *Only in installations where the oil is returned to the sump  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV661DPK is designed and engineered in Australia to suit: Ford Ranger P4AT (2.2L 4cyl) 2011-2020 Ford Ranger P5AT (3.2L 5cyl) 2011-2022 Ford Everest P5AT (3.2L 5cyl) 2015-2022 Mazda BT-50 P4AT (2.2L 4cyl) 2011-2018 Mazda BT-50 P5AT (3.2L 5cyl) 2011-2021 HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from particle contamination, costly injector failure, carbon build-up and reduced performance. With this bundle kit you can‘t go wrong! Direction Plus™ Fuel Manager Post-Filter + ProVent Ultimate Catch Can Dual Kit (PFPV645DPK) is designed and engineered in Australia to suit: Isuzu D-Max 4JJ3TCX (3.0L 4cyl) 2020 – On Isuzu MU-X 4JJ3TCX (3.0L 4cyl) 2020 – On Mazda BT-50 4JJ3TCX (3.0L 4cyl) 2020 – On HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! The Direction-Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – FMPV642DPK is designed and engineered in Australia to suit: Toyota Landcruiser 70 series 1VD-FTV (4.5L 8cyl) 2018-On HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV629DPC is designed and engineered in Australia to suit: Mitsubishi Triton 4N15 (2.4L 4cyl) 2015-2024 Mitsubishi Pajero Sport 4N15 (2.4L 4cyl) 2015-2023 HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV628DPC is designed and engineered in Australia to suit: Toyota Fortuner 1GD-FTV (2.8L 4cyl) 2016 – on Toyota Hilux 1GD-FTV (2.8L 4cyl) 2016 – on Toyota Hilux 2GD-FTV (2.4L 4cyl) 2018 – on NOTE: EXCLUDES Mild Hybrid 48V-equipped V-Active versions HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV620DPC is designed and engineered in Australia to suit: Toyota Prado 150/155 series 1GD-FTV (2.8L 4cyl) 2015-2023 HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV614DPC is designed and engineered in Australia to suit: Toyota Land Cruiser 200 Series 1VD-FTV (4.5L 8cyl) 2007-2022 HOW DOES IT WORK? FUEL MANAGER POST-FILTER Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!! THE SOLUTION To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system BENEFITS OF A FUEL MANAGER POST-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked *Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

The Direction-Plus™ TR+ Throttle Controller TR0985DP fits Jeep Wrangler & Grand Cherokee WK2 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures) INSTALLATION With an easy installation, the TR+ can be fitted to both diesel and petrol vehicles in less than 5 minutes! The Direction-Plus™ TR+ Throttle Controller utilises all factory plugs so there is no cutting or rewiring necessary.

Direction-Plus™ PreLine-Plus Pre-Filter kit PL652DPK is an innovative pre-filter system for diesel fuel which suits Mitsubishi Triton MV models. This kit fits: Mitsubishi Triton MV 4N16 (2.4L 4cyl) 2024 – on PROTECT YOUR ENGINE PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. WATER SEPARATION EFFICIENCY With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter  Check fitment guide below to confirm suitability for your vehicle.

Direction-Plus™ PreLine-Plus PL648DPK is an innovative pre-filter system for diesel fuel which is designed and engineered in Australia to suit: Toyota Landcruiser 70 series 1GD-FTV 2.8L 4cyl (2023 – On) models . Driver side mounting location. This kit fits: Toyota Land Cruiser 70 Series 1GD-FTV (2.8L 4cyl) 2023 – On PROTECT YOUR ENGINE PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. WATER SEPARATION EFFICIENCY With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter  Check fitment guide below to confirm suitability for your vehicle.

Direction-Plus™ PreLine-Plus Pre-Filter Kit PL635DPK is an innovative pre-filter system for diesel fuel which is designed and engineered in Australia to suit: Toyota Landcruiser 300 Series models. This kit fits: Toyota Land Cruiser 300 Series (V6 Diesel F33A-FTV) 2022 – On Please note: Fuel Filters not compatible with Kaymar rear bar PROTECT YOUR ENGINE PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. WATER SEPARATION EFFICIENCY With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter  Check fitment guide below to confirm suitability for your vehicle.

Direction-Plus™ PreLine-Plus PL671DPK is an innovative pre-filter system for diesel fuel which is designed and engineered in Australia to suit: Ford Next Gen Everest & Ranger models. UPDATE: Version 2 bracket released November 2023 now compatible for Touring & Premium Pack options with Auxilliary 6 switch pack (overhead switches) This kit fits: Ford Next-Gen Ranger & Everest (BF2S 3.0L 6cyl) 2022- On Compatible with Dual Battery Systems Ford Next-Gen Ranger & Everest (YN2S 2.0L 4cyl) 2022- On Compatible with Dual Battery Systems VW Amarok Core & Life NF – (DXWA 3.0L 6cyl) 2023- On  Excludes Aventura, Panamericana & Style due to different battery tray VW Amarok Core & Life NF – (DXK 2.0L 4cyl) 2023-On Excludes Aventura, Panamericana & Style due to different battery tray PROTECT YOUR ENGINE PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. WATER SEPARATION EFFICIENCY With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT: Remote multi-stage water alert system (visual and audible) 100% water separation efficiency (based on 150μm droplet size) 98% particle separation (based on 30 micron particles) Reliable protection from corrosion and abrasion No need to visually check for water – included alarm Simple spin on style filter  Check fitment guide below to confirm suitability for your vehicle.

​The Gullwing Window Panel is a replacement part for your Front Runner Gullwing Window. ​This Glass Gullwing Window Panel is sold as a seperate component in order to replace a damaged window panel. If you currently own an Aluminium Gullwing Window and would like to swap out your aluminium panel for a glass panel, the Gullwing Window's Panel has been designed to be interchangable. The glass panel blends in well to the Land Cruiser 76's exterior style and allows you to peer into your load bed area for ease of access to your goods. Consists of:1x Glass panelMaterials used:Tinted and toughened 6mm glassProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:5.39kg (11.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8

​This Aluminium Gullwing Window Panel is sold as a seperate component in order to replace a damaged window. If you currently own a Glass Gullwing Window and would like to swap out your glass panel for an aluminium panel, the Gullwing Window's Panel has been designed to be interchangable. The aluminium panel allows for added security and blocks out view of your goods in the load bed area of your vehicle. Consists of:1x Aluminium panelMaterials used:Black powder-coated AluminiumProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:3.16kg (7lbs)

​This Aluminium Gullwing Window Panel is sold as a seperate component in order to replace a damaged window.If you currently own a Glass Gullwing Window and would like to swap out your glass panel for an aluminium panel, the Gullwing Window's Panel has been designed to be interchangable. The aluminium panel allows for added security and blocks out view of your goods in the load bed area of your vehicle. Consists of:1x Aluminium panelMaterials used:Black powder-coated AluminiumProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:3.16kg (7lbs)

​The Front Runner Aluminium Gullwing Window replaces the stock LEFT HAND rear window with an upward/outward opening window that is hinged at the top. Create easy access to the rear storage area of your Toyota Land Cruiser 76. The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Aluminum Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle. Includes 2 locking latches. Sealed with the same durable, weather resistant powder coating as the Front Runner Roof Rack. The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window. Drilling required for fitment. Consists of:Steel FrameHingesGas strutsLocksSet of keysAluminium panelMaterials used:Black powder-coated high strength steelBlack powder-coated 6mm Aluminium Product Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:13.6kg (30lbs)

​The Front Runner Glass Gullwing Window replaces the stock RIGHT HAND rear window with an upward/outward opening window that is hinged at the top. Create easy access to the rear storage area of your Toyota Land Cruiser 76. The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Glass Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle. Includes 2 locking latches. The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window. Drilling required for fitment. Consists of:Steel FrameHingesGas strutsLocksSet of keysGlass PanelMaterials used:Black powder-coated high strength steelTinted and toughened 6mm glassProduct Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:14kg (30.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:

​The Front Runner Glass Gullwing Window replaces the stock LEFT HAND rear window with an upward/outward opening window that is hinged at the top. Create easy access to the rear storage area of your Toyota Land Cruiser 76. The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Glass Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle. Includes 2 locking latches. The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window. Drilling required for fitment. Consists of:Steel FrameHingesGas strutsLocksSet of keysGlass PanelMaterials used:Black powder-coated high strength steelTinted and toughened 6mm glassProduct Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:14kg (30.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8

The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium. This creates extra convenient storage space for your Land Rover Defender Puma. Front Runner Gullwing Box Shelves can be used to create divisions in the box for storage. *Front Runner Gullwing Box Shelves, sold seperately. Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9") W x 310mm (12.2") L x 654mm (25.8") H (Box)860mm (33.9") W x 310mm (12.2") L x 746mm (29.4") H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Shelf made from plywood and powder-coated mild steel.Up to 6 of these shelves can be used in a gullwing box.Shelf has slots cut in to allow for various fixing straps or elastic straps to be used to secure plates or other items. Consists of:1x Mild steel & wood Shelf1x Installation KitMaterial used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steelProduct dimensions:264mm (10.4") L x 856mm (33.7") W x 36mm (1.4") HWeight:3.8kg (8.4lbs)

Transport and store you Gas/Propane bottle onto your Land Rover 90 & 110 with this high strength steel, gutter mount Single Gas Bottle Bracket. The bracket secures a single gas / propane bottle to the Land Rover Defender 90 & 110. For installation, drilling is required. This holder features a black powder coated high strength steel bracket and adjustable clamp to accommodate gas bottles with a diameter of 210mm (8.3") up to 290mm (11.4"). The bracket is lockable with the Rack Accessory Lock / Small. Supplied with installation hardware. Consists of:1 x Gas Bottle Frame1 x Gas Bottle Base Plate1 x Adjustable Gas Bottle ClampInstallation HardwareFitting Instruction Materials used:Black powder coated high strength steel Assembled Product Dimensions:341mm (13.4") L x 294mm (11.5") W x 621mm (24.4") H Weight:5.4kg (11.9lbs)Suitability:Holds gas bottles ranging from 210mm (8.3") to 290mm(") in diameter

Fuel your adventure with this easy-to-use gas/propane holder that attaches securely to any Front Runner Rack Tray. Never be far from the comforts of your portable stove and other propane accessories again. The simple latching method allows you to quickly attach different sized bottles. Perfect for portable cooking stoves, geyser/water heaters, heaters and lamps. Rack brackets securely hold your gas/propane bottle on your rack. 2 latches feature a safety catch to prevent any movement and are lockable with a for added safety. The removable collar is placed over the cylinder valve collar and latched on the rack brackets. The collar rods are adjustable to suit various bottle heights. Max Cylinder Height: 320mm (12.6")Max Cylinder Diameter: 280mm (11")Max Top Collar Diameter: 175mm (6.9")Max Weight: 10kg (22lbs) Consists of:1 x Pair of Rack Brackets1 x LPG Cylinder BracketInstallation HardwareFitting InstructionMaterials used:Black powder coated steelStainless steel safety latchesSpecial Notes:Cylinder dimension guidelines:Max Cylinder Height: 12.6" (320mm)Max Cylinder Diameter: 11" (280mm)Max Top Collar Diameter: 6.7" (170mm)Max Weight: 22lb (10kg)

Front Runner Fridge Slide 80L–90L The Front Runner Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide convenient access to portable fridges, camping equipment, storage boxes, and touring gear. Ideal for 4WDs, canopies, caravans, ute trays, and drawer systems, this low-profile slide maximises accessibility while minimising the space required within your vehicle. Featuring high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, making it easy to access your fridge and equipment without climbing into the vehicle. The rattle-free design and secure swivel latch locking mechanism help keep your cargo stable and secure during travel. Constructed from durable black powder-coated steel and supplied with mounting hardware for wood and metal surfaces, this fridge slide is built to withstand demanding touring, camping, overlanding, and worksite conditions. Features Suitable for 80L–90L portable fridges Heavy-duty 100kg load capacity High-strength bearing drawer slide system Nearly 100% tray extension for easy access Low-profile design maximises storage space Rattle-free operation during travel Secure swivel latch locking system Mounts to most flat surfaces Compatible with Front Runner drawer systems Pre-drilled mounting holes for easy installation Includes mounting hardware for wood and metal surfaces Durable black powder-coated steel construction Specifications Overall / Closed Dimensions: 920mm x 580mm x 65mm Open Dimensions: 1830mm x 580mm x 65mm Internal Dimensions: 880mm x 508mm x 25mm Weight: 16.7kg Maximum Load Capacity: 100kg Material: 1.8mm Black Powder-Coated Steel What's Included 1 x Front Runner Fridge Slide 1 x L-Bracket Latch Bolt Kit Frequently Asked Questions What fridge sizes are suitable for this Front Runner Fridge Slide? This slide is designed to suit many popular portable fridges in the 80L–90L range. Always compare your fridge dimensions with the tray measurements before purchasing. Can this fridge slide be mounted in a canopy, caravan, or ute tray? Yes. The slide can be mounted to most suitable flat surfaces, including canopies, caravans, ute trays, drawer systems, and touring vehicle storage setups. Does the slide lock securely during travel? Yes. The integrated swivel latch locking system and rattle-free design help keep your fridge and equipment secure while travelling on-road and off-road. Note: Fridges and storage containers shown are sold separately.

This battery bracket allows you to fit an additional battery to your vehicle by mounting as an additional bracket under your vehicle's hood. Includes all fitment parts. Made out of black powder coated high strength steel. Fits Right Hand Drive vehicles. NOTE: Not suitable for models fitted with an Auxiliary heater.

Direction Plus™ Fuel Manager Post-Filter Kit (PF664DPK) is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure. This kit fits: Ford Everest YNWS (2.0L 4cyl) 2018 – 2022 Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022 Ford Ranger Raptor YN2S (2.0L 4cyl) 2018 – 2022 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF642DPK is designed and engineered in Australia to suit Toyota Land Cruiser 70 Series models, protecting its engine against costly injector failure. This kit fits: Toyota Land Cruiser 70 Series 1VD-FTV (4.5L 8cyl) 2018 – On PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF635DPK is designed and engineered in Australia to suit: Toyota Land Cruiser 300 Series (V6 Diesel F33A-FTV) 2022 – On PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF631DPK is designed and engineered in Australia to suit Isuzu D-Max and MU-X models, protecting its engine against costly injector failure. This kit fits: Isuzu D-Max 4JJ1TC (3.0L 4cyl) 2012 – 2017 Isuzu MU-X 4JJ1TC (3.0L 4cyl) 2013 – 2017 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF629DPK is designed and engineered in Australia to suit Mitsubishi Pajero Sport and Triton models, protecting its engine against costly injector failure. This kit fits: Mitsubishi Pajero Sport 4N15 (2.4L 4cyl) 2015 – 2023 Mitsubishi Triton 4N15 (2.4L 4cyl) 2015 – 2024 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF625DPK is designed and engineered in Australia to suit Toyota Land Cruiser 70 Series models, protecting its engine against costly injector failure. This kit fits: Toyota Land Cruiser 70 Series 1VD-FTV (4.5L 8cyl) 2012 – 2017 Passenger side radiator mount Dual Battery Compatible ARB Compressor Compatible Toyota Land Cruiser 70 Series 1VD-FTV (4.5L 8cyl) 2018 – On Passenger side radiator mount PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF622DPK is designed and engineered in Australia to suit Mitsubishi Challenger and Triton models, protecting its engine against costly injector failure. This kit fits: Mitsubishi Triton 4D56 (2.5L 4cyl) 2008 – 2015 Mitsubishi Triton 4M41 (3.2L 4cyl) 2006 – 2008 Mitsubishi Challenger 4D56 (2.5L 4cyl) 2011 – 2013 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF621DPK is designed and engineered in Australia to suit Ford Everest / Ranger and Mazda BT-50 models, protecting its engine against costly injector failure. This kit fits: Ford Everest P5AT (3.2L 5cyl) 2015 – 2022 Ford Ranger P5AT (3.2L 5cyl) 2015 – 2022 Ford Ranger P4AT (2.2L 4cyl) 2011 – 2022 Mazda BT-50 P5AT (3.2L 5cyl) 2011 – 2021 Mazda BT-50 P4AT (2.2L 4cyl) 2011 – 2018 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.