All 4WD Parts and Accessories

This kit creates a full-size rack that sits above your Ford Ranger Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm), 2 Load Bed Mounts, and 6 Pickup Legs that fit into the Load Bed Mounts. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Ford Ranger T6.2 comes standard with the OEM Roll Top, Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit is available. Features KRFR025T - Ford Ranger T6.2 (2022-Curr)SLII Load Bed Rack Kit Consisting of: 3x LASS026 - Universal Load Bed Leg / Tall (Pair) 1x LASS046 - Ford Rngr T6.2 (22-Curr) Ld bd rck mount system 1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 33.7kg (74.3lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 295mm (12") Shipping Weight: Weight: 39kg (86lbs)

Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6.2 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind. This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor load bed. Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Ford Ranger T6.2 Wildtrak/Raptor with specific mounting brackets bolted to the existing factory mounting points.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features PBFR002T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed Rack Kit Consisting of: 3x FASS025 - Foot Set / 70mm - 80mm 1x PBFR002S - Ford Ranger T6.2 Next Gen (2023-Current) Pro Bed S 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 70.63kg (155.71lbs) Shipping Dimensions: Width: 460mm (18") Length: 1720mm (68") Height: 640mm (25") Shipping Weight: Weight: 83kg (183lbs)

This tough, lightweight steel and aluminum cargo system secures to the load bed of your Ford Ranger T6.2 Wildtrak/Raptor Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this incredible cargo system, you can pack all the necessary overland, camping or sports gear. This Pro Bed System is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor Double Cab load bed. This System provides the frame to customize your Load Bed storage configuration. Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it. Secures to the load bed of the Ford Ranger T6.2 Wildtrak/Raptor Double Cab with specific mounting brackets bolted to the existing factory mounting points. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks. The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net. Features PBFR002S - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed System Consisting of: 1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium 1x PBFR002 - Ford Ranger T6 Wildtrak Raptor (22-Current) Pro 1x PBRA001 - Pro Bed Rack Universal Structural Components Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 49.86kg (109.92lbs) Shipping Dimensions: Width: 640mm (25") Length: 1280mm (50") Height: 460mm (18") Shipping Weight: Weight: 52kg (114lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFR007T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFR003 - Ford Ranger T6/Wildtrak (2012-2019) Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.91kg (63.74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 260mm (10") Shipping Weight: Weight: 30kg (66lbs)

This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. An opening on the Foot Rails allows access to Front Runner Under Rack Mount Tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a limited lifetime warranty* For further information on installation, please see the Fitment Guide in the Install tab. Drilling is required for installation. Features KRFR012T - Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFR005 - Ford RangerT6/Wildtrak/Raptor(2012-2022)Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.91kg (63.74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 250mm (10") Shipping Weight: Weight: 29kg (64lbs)

This kit creates a full-size rack that sits above your Ford Ranger Wildtrak's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT032T - Ford Ranger Wildtrak (2014-Curr) Roll Top Slimline II Load Bed Rack Kit / Tall - by Front Runner Consisting of: 3x LASS033 - Pick Up Roll Top Leg Mount / Tall (Pair) 3x RRAC962 - Track Mount Stud Plate 1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.56kg (62.96lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 250mm (10") Shipping Weight: Weight: 28.8kg (63lbs)

This kit creates a full-size rack that sits above your Ford Ranger Wildtrak/Rapotor's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT016T - Ford Ranger Wildtrak/Raptor (2012-Curr) Roll Top Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount 3x RRAC962 - Track Mount Stud Plate 1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 27.51kg (60.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 230mm (9") Shipping Weight: Weight: 25.91kg (57lbs)

This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford Super Cab 2012+ contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFS004T - Ford Super Cab (2012-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner 1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner 1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner 1 x TRFS002 - Ford Super Cab T6 (2012-Current) Tracks / 1080mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.3kg (51.3lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18.0") Length: 1615mm (64.0") Height: 140mm (6.0") Shipping Weight: 26.4kg (58.0lbs)

This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-250 Super Duty. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Features KRFF010T - Ford Super Duty F-250-F-350 (1999-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 1x FAFF002 - Ford F-250 F-350 (1999-Current) Foot Rails / Low 1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.75kg (67.79lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 240mm (9") Length: 1730mm (68") Height: 95mm (4") Shipping Weight: Weight: 30.6kg (67lbs)

This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Tourneo/Transit Custom LWB. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFT003T - Ford Tourneo/Transit Custom LWB (2013-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFT002 - Ford Tourneo/TransitCustomLWB(2013-Curr)Foot Rails1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 54.62kg (120.42lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")   Shipping Weight: Weight: 53.2kg (117lbs)

This 2368mm/93.2" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Tourneo/Transit Custom SWB. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFT004T - Ford Tourneo/Transit Custom SWB (2013-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFT003 - Ford Tourneo_Transit CustomSWB(2013-Cur) Foot Rail 1x RRSTM12 - SLII Tray - 1475mm(W)X2368mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 48.26kg (106.39lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 260mm (10") Shipping Weight: Weight: 49.4kg (109lbs)

Compatible with Ford Transit (L2H2/130" WB) (2013-Current) medium roof vans with a vehicle length of 5531mm / 217.8". Load-carrying area: 2368mm (93") x 1470mm (57.9") . Six (6) Mounting Feet secure into van's existing factory mounting points. Compatible with most Front Runner side mount accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVFT001T - Ford Transit (L2H2/130" WB/Medium Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 3x FAVF003 - Ford Transit Van Rack Foot Set 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 3x RRNS1425 - Narrow Slat / 1425mm (Pair) 2x SPVT001 - Van Rack Side Profile / 1156mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H Approximate Installed Weight: 26.59kg (58.62lbs) Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 29.35kg (65lbs)

Compatible with Ford Transit L2/H3 / 130" wheelbase high roof vans with a vehicle length of 5531mm / 217.8". Load-carrying area: 2368mm (93") x 1470mm (57.9"). Six (6) Mounting Feet secure into van's existing factory mounting points. Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVFT002T - Ford Transit (L2H3/130" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 3x FAVF003 - Ford Transit Van Rack Foot Set 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 3x RRNS1425 - Narrow Slat / 1425mm (Pair) 2x SPVT001 - Van Rack Side Profile / 1156mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H Approximate Installed Weight: 26.59kg (58.62lbs) Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 29.35kg (65lbs)

Compatible with Ford Transit (L3H3/148" WB) (2013-Current) high roof vans with a vehicle length of 5981mm / 235.5". Load-carrying area: 2974mm (117.1") x 1470mm (57.9"). Eight (8) Mounting Feet secure into van's existing factory mounting points. Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVFT004T - Ford Transit (L3H3/148" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 4x FAVF003 - Ford Transit Van Rack Foot Set 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 4x RRNS1425 - Narrow Slat / 1425mm (Pair) 1x SPVT002 - Van Rack Side Profile / 1358mm 1x SPVT003 - Van Rack Side Profile / 1560mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 2974mm (117.1") L x 1470mm (57.9") W x 123mm (4.8") H Approximate Installed Weight: 34.45kg (75.95lbs) Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 37.35kg (82lbs)

Compatible with 2013-Current Ford Transit (L4H3/148" WB) High roof vans with a vehicle length of 6704mm / 263.9". Load-carrying area: 3580mm (141") x 1470mm (57.9"). Eight (8) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket standard configuration at 123mm (4.8"). Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVFT005T - Ford Transit (L4H3/148" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 4x FAVF003 - Ford Transit Van Rack Foot Set 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 5x RRNS1425 - Narrow Slat / 1425mm (Pair) 2x SPVT004 - Van Rack Side Profile / 1762mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 3580mm (141") L x 1470mm (57.9") W x 123mm (4.8") H Approximate Installed Weight: 43.45kg (95.79lbs) Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 44.35kg (98lbs)

This 2570mm/101.18" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Transit contains Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. Installs easily with no drilling required. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFT005T - Ford Transit 6th Gen (2006-2013) Slimline II Roof Rack Kit - by Front Runner Consisting of: 5x LASS103 - No 3 Leg 155mm (Pair)5x RRAC109 - Gutter Mount Leg Extensions1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 68.24kg (150.44lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1720mm (68"); Height: 270mm (11")   Shipping Weight: Weight: 70kg (154lbs)

This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains the Slimline II Tray, Wind Deflector, and 4 foot rails to mount the Slimline II Tray to your Ford Transit Passenger Van XLT. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFT002T - Ford Transit Passenger Van XLT (2013-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 1x FAFT001 - Ford Transit Passenger Van XLT (2013-Current) Foot Rails 1x RRSTM06 - SLII Tray - 1475mm(W)X1156mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 31.96kg (70.46lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 300mm (12") Shipping Weight: Weight: 32.14kg (71lbs)

This 2772mm/109.1" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Ford Transit Passenger Van XLT (USA 148 SPEC) (Euro L3H2 & L3H3 Spec). Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Suitable for Transit Passenger Van XL /XLT 148 WB (length 236') H1 /H2. Features KRFT001T - Ford Transit Passenger Van XLT (2013-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFT001 - Ford Transit Passenger Van XLT (2013-Current) Foot Rails 1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 50.33kg (110.96lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 250mm (10") Shipping Weight: Weight: 51.6kg (114lbs)

A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 50mm Feet, 2 60mm Feet, 2 1255mm Load Bars, 2 Ford Ranger 1200mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars. These Load Bars are mounted to the vehicles roof via a set of supplied Tracks and Track Mounted Feet. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRFM013 - Ford/Mazda T6/T7 (2012-2022) Load Bar Kit / Track & Feet - by Front Runner Consisting of: 1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner 1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner 1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 8kg (18lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 250mm (10") Length 1360mm (54") Height 110mm (4") Shipping Weight: Weight 9.3kg (20.5lbs)

This 2312mm/91" long, 1/2 Slimline II cargo carrying roof rack kit for the Freightliner Sprinter (2007+) contains 2 Slimline II Trays, Wind Deflector, Track set and 12 Mounting Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFS006T - Freightliner Sprinter Van (2007-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 6 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner 2 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner 1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner 1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 55kg (120lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1800mm (71") Height 380mm (15") Shipping Weight: Weight 63.4kg (139.5lbs)

This 1560mm/61.4" long, Slimline II cargo carrying roof rack kit for the Freightliner Sprinter (2007+) contains a Slimline II Tray, Wind Deflector, Track set and 6 Mounting Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFS007T - Freightliner Sprinter Van (2007-Current) Slimline II 1/4 Roof Rack Kit - by Front Runner Consisting of: 3 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner 1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner 1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner 1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 35kg (77lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1795mm (71") Height 260mm (10") Shipping Weight: Weight 40.9kg (90.0lbs)

This 3120mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the Freightliner Sprinter (2007+) contains 2 Slimline II Trays, Wind Deflector, Track Set and 12 Mounting Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFS005T - Freightliner Sprinter Van (2007-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 6 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner 2 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner 1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner 1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 61kg (135lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1800mm (71") Height 380mm (15") Shipping Weight: Weight 71.4kg (157.1lbs)

This 1358mm/53.5 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRGC001T - GMC Canyon (2015-2022) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FACC001 - Chev Colorado/GMC Canyon (2015-2022) Foot Rails - by Front Runner 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 26kg (57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1615mm (64") Height 245mm (10") Shipping Weight: Weight 30.1kg (66.2lbs)

This kit creates a full-size rack that sits above your GMC Canyons Roll Top (2015-present) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Roll Top Leg Mounts that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRGC002T - GMC Canyon Roll Top 5.1' (2015-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm 1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L) 1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 31.41kg (69.25lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18") Length: 1730mm (68") Height: 280mm (11") Shipping Weight: Weight: 34.63kg (76lbs)

This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. Features KRGM009T - GMC Sierra 1500 (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L) 1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 38.9kg (85.8lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18.0") Length: 1730mm (68.0") Height: 290mm (11.0") Shipping Weight: 39.4kg (87.0lbs)

This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. Features KRGM008T - GMC Sierra 1500 / Short Load Bed (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L) 1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 35.3kg (77.8lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18.0") Length: 1730mm (68.0") Height: 285mm (11.0") Shipping Weight: 35.8kg (79.0lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRGM011 - GMC Sierra Crew Cab (2014-Current) Double Load Bar Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner 1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 11.7kg (25.8lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 1685mm (66.0") Length: 125mm (5.0") Height: 310mm (12.0") Shipping Weight: 11.6kg (26.0lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRGM013 - GMC Sierra Crew Cab (2014-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner 1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 16.1kg (35.6lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 1685mm (66.0") Length: 125mm (5.0") Height: 385mm (15.0") Shipping Weight: 15.6kg (34.0lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab / Short Load Bed. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRGM010 - GMC Sierra Crew Cab / Short Load Bed (2014-Current) Double Load Bar Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner 1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 11.4kg (25.2lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 1685mm (66.0") Length: 125mm (5.0") Height: 315mm (12.0") Shipping Weight: 11.0kg (24.0lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab / Short Load Bed. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRGM012 - GMC Sierra Crew Cab / Short Load Bed (2014-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner 1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 15.9kg (35.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 1685mm (66.0") Length: 125mm (5.0") Height: 385mm (15.0") Shipping Weight: 15.2kg (33.0lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Grab-On Feet to mount the Slimline II Tray to the roof rails of your Subaru Forester Wilderness. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. This rack kit can be removed leaving your vehicles roof and roof rails in their original condition. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly. Features KRSF005T - Subaru Forester Wilderness (2022-Current) Slimline Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GORR052 - Raised Rail Outer Grips / No. 32x GORR072 - Raised Rail Inner Grips / C1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 22.94kg (50.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 160mm (6")   Shipping Weight: Weight: 25kg (55lbs)

This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. Features KRGM008T - GMC Sierra 1500 / Short Load Bed (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L) 1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 35.3kg (77.8lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18.0") Length: 1730mm (68.0") Height: 285mm (11.0") Shipping Weight: 35.8kg (79.0lbs)

This kit creates a full size rack that sits above your Nissan Frontier's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNF001T - Nissan Frontier Pickup (1997-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner 1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 26kg (57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 30.1kg (66.1lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Subaru Forester (2007-2013). This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicles roof and roof rails in their original condition. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly. Features KRSF003T - Subaru Forester (2007-2013) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR053 - Raised Rail Outer Grab-On / No. 4 - by Front Runner 2 x GORR071 - Raised Rail Inner Grab-On / B - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 21kg (46lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1610mm (63") Height 285mm (11") Shipping Weight: Weight 24.3kg (53.4lbs)

Get your Suzuki Fronx geared-up for all types of adventures with the proven tough Slimline II Roof Rack Kit. This modular rack has 55+ available accessories, so transporting cargo, bicycles, kayaks, camping, or overland gear will be a breeze. Front Runner's popular Under Rack Table can be fitted to this rack so you can picnic wherever you stop. This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Suzuki Fronx. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRSF006T - Suzuki Fronx (2023 - Current) Slimline II Roof Rack Consisting of: 1x FASF001 - Suzuki Fronx (2023 - Current) Foot Rails 1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.14kg (51.01lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 595mm (23") Length: 1720mm (68") Height: 160mm (6") Shipping Weight: Weight: 29kg (64lbs)

This 752mm/29.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Fiat 500X. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicles roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly. Features KRFF007T - Fiat 500X (2014-Curr) Slimline II Roof Rack Kit Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR011 - Flush Rail Grab-On Outer Grips / No. 2 - by Front Runner 2 x GOFR034 - Flush Rail Grab-On Inner Grips / E - by Front Runner 1 x RRSTD04 - Slimline II Tray - 1255mm(W) X 752mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 17kg (38lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 20.0kg (44.0lbs)

This 1964mm/77.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2016+ Toyota Fortuner. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRTF010T - Toyota Fortuner (2016-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FATF005 - Toyota Fortuner (2016-Current) Foot Rails - by Front Runner 1 x RRSTA10 - Slimline II Tray - 1165mm(W) X 1964mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 33kg (73lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 630mm (25") Length 1640mm (65") Height 160mm (6") Shipping Weight: Weight 38.8kg (85.3lbs)

This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Flush Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.   Consisting of:2x GOFR008A - Dometic Grab-on Flush Rail Adaptor Plate (Pair)1x GOFR008L - Leopard Foot with Lock / Pair1x GOFR008N - Leopard Foot without Lock / Pair1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 22.87kg (50.42lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 30kg (66lbs)

This 752mm/29.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Flush Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.   Consisting of:2x GOFR008A - Dometic Grab-on Flush Rail Adaptor Plate (Pair)1x GOFR008L - Leopard Foot with Lock / Pair1x GOFR008N - Leopard Foot without Lock / Pair1x RRSTD04 - SLII Tray - 1255mm(W)X752mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 16.66kg (36.73lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 24kg (53lbs)

Seamlessly elevate your vehicle's rooftop carrying capacity with the Grab-On Flush Rail Slimline II Kit. This integrated ensemble features a tough Slimline II Tray and includes two pairs of sturdy Grab-On Flush Rail Feet, offering a secure platform for transporting your outdoor or work gear. This 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Flush Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.   Consisting of:2x GOFR008A - Dometic Grab-on Flush Rail Adaptor Plate (Pair)1x GOFR008L - Leopard Foot with Lock / Pair1x GOFR008N - Leopard Foot without Lock / Pair1x RRSTD05 - SLII Tray - 1255mm(W)X954mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 18.73kg (41.29lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 28kg (62lbs)

The Grab-on Flush Rail Slimline II Kit allows you to live a sporty and outdoor lifestyle as you can now carry the equipment you need on the strong Slimline II Tray. The easy-to-fit system is secured to your roof using 2 pairs of Grab-On Flush Rail Feet. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Flush Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.   Consisting of:2x GOFR008A - Dometic Grab-on Flush Rail Adaptor Plate (Pair)1x GOFR008L - Leopard Foot with Lock / Pair1x GOFR008N - Leopard Foot without Lock / Pair1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 24.29kg (53.55lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 31kg (68lbs)

Elevate your vehicle's cargo-carrying capacity with the Grab-on Raised Slimline II Kit. Once fitted, you can quickly load your camping, work, or sports gear onto the tough Slimline II tray. This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.   Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 20.22kg (44.58lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 28kg (62lbs)

The smart Grab-on Raised Rail Slimline II Kit lets you live the sporty or outdoor lifestyle as you can now put the gear you need on the Slimline II Tray, which is secured to your vehicle’s roof using the 2 pairs of Grab-On Raised Rail Feet. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 22.16kg (48.85lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 24kg (53lbs)

The Grab-on Raised Rail Slimline II Kit consists of a Slimline II Tray, Wind Deflector, and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to your vehicle's roof rails. This easy-to-install system lets you carry sports or camping gear on your vehicle’s roof. This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.   Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 20.45kg (45.08lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 23kg (51lbs)

Elevate your outdoor lifestyle when you fit the Grab-on Raised Rail Slimline II Kit. Using the smart Grab-On Raised Rail Feet, you can now carry your camping, sports, or work gear on the Slimline II Tray attached to your roof. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 23.24kg (51.24lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 30kg (66lbs)

Get set for the outdoor lifestyle when you fit the Grab-on Raised Rail Slimline II Kit. The Slimline II Tray can now be attached to your roof using the smart Grab-On Raised Rail Feet, allowing you to carry your camping, sports, or work gear. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 22.52kg (49.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 30kg (66lbs)

Live the outdoor lifestyle you want when you fit the Grab-on Raised Rail Slimline II Kit. The Slimline II Tray allows you to carry your camping, sports, or work gear. The Tray is attached to your roof using the smart Grab-On Raised Rail Feet. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle's owner's manual for manufacturer's recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 23.81kg (52.49lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 31kg (68lbs)

The Grab-on Raised Rail Slimline II Kit allows you to live a sporty, outdoor lifestyle. You can now carry the required equipment on the strong Slimline II Tray. The easy-to-fit system is secured to your roof using 2 pairs of Grab-On Raised Rail Feet. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Raised Rail Feet to mount the Slimline II Tray to the roof rails of your vehicle. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The load for Factory Rail Rack Kits must not exceed 110lbs or 50kg, and ensure the load is distributed evenly. Note: For specific load ratings and speed limitations refer to the detailed fitment guides.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x GORR001A - Dometic Grab-on Raised Rail Adaptor Plate (Pair)1x GORR001L - Jackson Foot with Lock / Pair1x GORR001N - Jackson Foot without Lock / Pair1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 24.78kg (54.63lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 320mm (13") Shipping Weight:Weight: 32kg (70lbs)

Haul more in your GWM P Series with this full-size, tough-as-nails rack kit, which frees up your precious load bed cargo space. This kit creates a full-size rack that sits above your GWM P Series load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Universal Load Bed Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 66.2kg (145.95lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 280mm (11")Shipping Weight:Weight: 33.2kg (73lbs)

Haul all your gear atop your GWM P Series with this sleek, sturdy Slimline II Roof Rack Kit, complete with tray, wind deflector and foot rails. This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your GWM P Series. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access Front Runner under rack mount table (1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAGP001 - GWM P Series (2019 - Current) Foot Rail1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.06kg (55.25lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 30.2kg (66lbs)