HERTZ Cento 12" 700W 2 Ohm Svc Subwoofer (Cs 300...
$354.99
The new CS 300 s2 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 32 l. for the 30 cm (12 in.) CS 300 model.The 2Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 300 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car!
Size mm (in.)
300 (12)
Power Handling - Continuous W
350
Power Handling - Peak W
700
Impedance Ohm
2
No Filter Component
SUBWOOFER
Voice Coil Ø
35 (1.38)
Magnet size D x d x h mm (in.)
134 x 45 x 34 (5.28 x 1.77 x 1.34)
Weight of one component kg (lb.)
4,844 (10.68)
Magnet
High density flux ferrite
Cone
Polyproyilene
Xmech mm (in.)
16,5 (0.65)
D mm
267,01
Xmax mm
12,5
Re Ohm
2,2
Fs Hz
25
Le mH
2,8
Vas I
87,25
Mms g
205
Cms mm/N
0,20
BL T*m
12
Qts
0,46
Qes
0,49
Qms
7,2
Spl dB
86,5
A
318 mm
12.52 in.
B
281 mm
11.06 in.
C
147 mm
5.79 in.
D
130 mm
5.12 in.
E
308 mm
12.13 in.
F
28,3 mm
1.11 in.
HERTZ Cento 10" 600W 4 Ohm Svc Subwoofer (Cs 250...
$314.99
The new CS 250 s4 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 16 l. for the 25 cm (10 in.) CS 250 model.The 4Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 250 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car!
Size mm (in.)
250 (10)
Power Handling - Continuous W
300
Power Handling - Peak W
600
Impedance Ohm
4
No Filter Component
SUBWOOFER
Voice Coil Ø
35 (1.38)
Magnet size D x d x h mm (in.)
120 x 45 x 34 (4.72 x 1.77 x 1.34)
Weight of one component kg (lb.)
3,795 (8.37)
Magnet
High density flux ferrite
Cone
Polyproyilene
Xmech mm (in.)
16,5 (0.65)
D mm
216
Xmax mm
12,5
Re Ohm
3,6
Fs Hz
30
Le mH
3,33
Vas I
34,5
Mms g
154
Cms mm/N
0,18
BL T*m
13,7
Qts
0,52
Qes
0,56
Qms
9,4
Spl dB
84
A
270 mm
10.63 in.
B
231 mm
9.09 in.
C
132 mm
5.2 in.
D
115 mm
4.53 in.
E
260 mm
10.24 in.
F
28,3 mm
1.11 in.
HERTZ Cento 10" 600W 2 Ohm Svc Subwoofer (Cs 250...
$314.99
The new CS 250 s2 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 16 l. for the 25 cm (10 in.) CS 250 model.The 2Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 250 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car!
Size mm (in.)
250 (10)
Power Handling - Continuous W
300
Power Handling - Peak W
600
Impedance Ohm
2
No Filter Component
SUBWOOFER
Voice Coil Ø
35 (1.38)
Magnet size D x d x h mm (in.)
120 x 45 x 34 (4.72 x 1.77 x 1.34)
Weight of one component kg (lb.)
3,795 (8.37)
Magnet
High density flux ferrite
Cone
Polyproyilene
Xmech mm (in.)
16,5 (0.65)
D mm
216
Xmax mm
12,5
Re Ohm
2,2
Fs Hz
30
Le mH
2,38
Vas I
32
Mms g
166
Cms mm/N
0,17
BL T*m
11,5
Qts
0,49
Qes
0,52
Qms
9,4
Spl dB
84
A
270 mm
10.63 in.
B
231 mm
9.09 in.
C
132 mm
5.2 in.
D
115 mm
4.53 in.
E
260 mm
10.24 in.
F
28,3 mm
1.11 in.
HERTZ Cento 8" 300W 4 Ohm Svc Subwoofer (Cs 200...
$344.99
Hertz CS 200 S4 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R&D team, always at the forefront in the search for innovative solutions, with unfailing effort succeeded in obtaining powerful bass frequencies from compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 9,6 l (0.33 CF). The reduced depth, the compact magnetic group, and the lack of rear decompression hole allow the box to be shaped around the subwoofer, obtaining a depth almost the same as the driver itself, for maximum freedom of installation on any type of car. The special cooling system for the six-layer voice coil keeps the operating temperature within the optimal range, even in case of extended listening sessions at high sound pressure. An innovative system of dynamic fluid optimization and turbulence reduction was achieved, thanks to the spider support acting as an air duct towards the venting holes on the basket. This drastically reduces the acoustic distortions generated by air compression at high excursions. The cone geometry, the suspension, and the spider have been optimized using FEM (Finite Element Method) simulations to obtain the best performance configuration, which guarantees control and low distortions even at high mechanical excursions of the mobile group. The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection - even in installations with multiple subwoofers. The subwoofer is also provided with an elegant high-resistance ABS plastic gasket that allows the grille to be fixed to finish the installation. The optional grille in robust black metal mesh offers total protection for the subwoofer, and an appealing look - thanks to the Hertz diamond aluminum logo. With the Cento subwoofers, even the younger enthusiasts will enjoy the exciting reproduction of low frequencies in the car!
Size mm (in.)
200 (8)
Power Handling - Continuous W
150
Power Handling - Peak W
300
Impedance Ohm
4
Voice Coil Type
single
No Filter Component
SUBWOOFER
Voice Coil Ø
35 (1.38)
Magnet size D x d x h mm (in.)
120 x 50 x 28 (4.72 x 1.97 x 1.1)
Weight of one component kg (lb.)
2,87 (1.30)
Magnet
High density flux ferrite
Cone
Polyproyilene
Xmech mm (in.)
11,5 (0.45)
D mm
172
Xmax mm
9
Re Ohm
3,3
Fs Hz
40
Le mH
1,7
Vas I
13,7
Mms g
76,8
Cms mm/N
0,21
BL T*m
10,6
Qts
0,52
Qes
0,58
Qms
5
Spl dB
84
A
213 mm
8.39 in.
B
177 mm
6.97 in.
C
114 mm
4.49 in.
D
101 mm
3.98 in.
E
201 mm
7.92 in.
F
24 mm
0.95 in.
HERTZ Cento 6.5" Woofer Component - Pair (C 165)
$199.99
Much time was invested in the research of the perfect material for the C 165 woofer cones: through a long process of customisation of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
70
Power Handling - Peak W
210
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
55 ÷ 7k
Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Weight of one speaker kg (lb.)
0,96 (2.12)
Magnet
High density flux ferrite
Cone
Semi-pressed paper+ Mica
Xmech mm (in.)
4,9 (0.19)
D mm
131,5
Re Ohm
3,2
Fs Hz
60
Le mH
0,2
Vas I
13,24
Mms g
13,9
Cms mm/N
0,51
BL T*m
4,9
Qts
0,59
Qes
0,69
Qms
3,9
Spl dB
93
A
165 mm
6.5 in.
B
142 mm
5.59 in.
C
71 mm
2.8 in.
D
62,5 mm
2.46 in.
E
171 mm
6.73 in.
F
24 mm
0.94 in.
HERTZ Spl Show 6X9" 3-Way Coaxial Speaker - Pair (Sx...
$609.99
SX 690 NEO.1 is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and a 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on a polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.
The provided MPG 690 grille is made of a high-resistance ABS plastic structure with a metallic finish and a protective metal mesh.
Component
SPL COAXIAL
Size mm (in.)
in. 6 x 9
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Frequency Response Hz
65 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
110 x 45 x 20 (4.33 x 1.77 x 0.79)
Tweeter Magnet size D x h mm (in.)
24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
1,69 (3.73)
Woofer Magnet
Special Neodymium N38 H
Tweeter Magnet
Special Neodymium N38 H
Cone
Water repellent pressed paper
Dome
Tetolon
D mm
169
Xmax mm
5,5
Re Ohm
3
Fs Hz
65
Le mH
0,4
Vas I
11,29
Mms g
36,1
Cms mm/N
0,16
BL T*m
7,665
Qts
0,62
Qes
0,78
Qms
2,9
Spl dB
94
A
237,5 mm
9.35 in.
B
225 mm
8.86 in.
C
93 mm
3.66 in.
D
85 mm
3.35 in.
E
163 mm
6.42 in.
F
154 mm
6.06 in.
HERTZ Spl Show 6X9" 3-Way Coaxial Speaker - Pair (Sx...
$599.99
SX 690 H NEO coaxial for 2024 Harley is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.
Component
SPL COAXIAL
Size mm (in.)
in. 6 x 9
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Frequency Response Hz
65 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
110 x 45 x 20 (4.33 x 1.77 x 0.79)
Tweeter Magnet size D x h mm (in.)
24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
1,69 (3.73)
Woofer Magnet
Special Neodymium N38 H
Tweeter Magnet
Special Neodymium N38 H
Cone
Water repellent pressed paper
Dome
Tetolon
D mm
169
Xmax mm
5,5
Re Ohm
3
Fs Hz
65
Le mH
0,4
Vas I
11,29
Mms g
36,1
Cms mm/N
0,16
BL T*m
7,665
Qts
0,62
Qes
0,78
Qms
2,9
Spl dB
94
A
237,5 mm
9.35 in.
B
225 mm
8.86 in.
C
93 mm
3.66 in.
D
85 mm
3.35 in.
E
163 mm
6.42 in.
F
154 mm
6.06 in.
HERTZ Spl Show 6.5" 2-Way Coaxial Speaker - Pair (Sx...
$419.99
Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use.
Component
SPL COAXIAL
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Tweeter diaphragm mm (in.)
PEI
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
100 ÷ 20k
Woofer Magnet size D x d x h mm (in.)
70 x 45 x 7 (2.76 x 1.77 x 0.28)
Tweeter Magnet size D x h mm (in.)
19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.)
0,94 (2.08)
Woofer Magnet
Special Neodymium N38 H
Tweeter Magnet
Special Neodymium N38 H
Cone
Water repellent pressed paper
D mm
128
Re Ohm
3,3
Fs Hz
110
Le mH
0,061
Vas I
4,92
Mms g
10,14
Cms mm/N
0,21
BL T*m
5,83
Qts
0,64
Qes
0,68
Qms
9,7
Spl dB
96,5
A
167,2 mm
6.58 in.
B
143,3 mm
5.64 in.
C
69,5 mm
2.74 in.
D
57,8 mm
2.28 in.
HERTZ Spl Show 6.5" Midrange Woofer Component - Pair (Sv...
$334.99
The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.
SV 165.1165 (6.5) mm (in.) | Spl Midrange | 400 W | 4 Ohm
The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.
Component
SPL Midrange
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
150
Power Handling - Peak W
400
Impedance Ohm
4
Voice Coil Ø
38 (1.5)
Frequency Response Hz
100 ÷ 10k
Magnet size D x d x h mm (in.)
110 x 45 x 20 (4.3 x 1.8 x 0.8)
Weight of one speaker kg (lb.)
1,85 (4)
Magnet
High density flux ferrite
Cone
Ultra light pressed paper
D mm
128
Re Ohm
3,2
Fs Hz
110
Le mH
0,26
Vas I
4,65
Mms g
10,4
Cms mm/N
0,2
BL T*m
6,5
Qts
0,5
Qes
0,55
Qms
5,53
Spl dB
97
A
168 mm
6.6 in.
B
145 mm
5.7 in.
C
74 mm
2.9 in.
D
66 mm
2.6 in.
HERTZ Spl Show 1.8" (46Mm) High Efficiency Compression Driver -...
$524.99
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only.
Component
HIGH EFFICIENCY COMPRESSION DRIVER
Size mm (in.)
46 (1.8)
Power Handling - Peak W
120
Power Handling - Peak Note
Hi-pass filtered @ 5 kHz - 12 dB Oct.
Impedance Ohm
4
Voice Coil Ø
35 (1.4)
Frequency Response Hz
2k ÷ 20k
Weight of one component kg (lb.)
0,53 (1.17)
Magnet
Neodymium
Dome
Aluminium
D mm
46
Re Ohm
3,3
Fs Hz
4000
Le mH
0,02
BL T*m
3,5
Spl dB
109
A
69 mm
2.72 in.
B
52 mm
2.05 in.
C
65,7 mm
2.59 in.
D
33,3 mm
1.31 in.
HERTZ Mille Pro 6X9" 3-Way Coaxial Speaker - Pair (Mpx...
$524.99
The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.
Component
Coaxials
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
30 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
107 x 45 x 20 (4.21 x 1.77 x 0.79)
Weight of one speaker kg (lb.)
2.28 (5.03)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±8 (0.31)
D mm
169
Re Ohm
3
Fs Hz
50
Le mH
0,07
Vas I
24
Mms g
30
Cms mm/N
0,34
BL T*m
7,2
Qts
0,43
Qes
0,55
Qms
2
Spl dB
94
A
241 mm
9.49 in.
B
223 mm
8.74 in.
C
108 mm
4.25 in.
D
90 mm
3.54 in.
E
267 mm
10.53 in.
F
38,5 mm
1.52 in.
HERTZ Mille Pro 6.5" 2-Way Coaxial Speaker - Pair (Mpx...
$419.99
The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations.
Component
Coaxials
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
36 (1.42)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 21,5k
Woofer Magnet size D x d x h mm (in.)
90 x 45 x 17 (3.54 x 1.77 x 0.67)
Tweeter Magnet size D x h mm (in.)
29.5 x 22 x 4 (1.16 x 0.87 x 0.16)
Weight of one speaker kg (lb.)
1.27 (2.8)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±6 (0.24)
D mm
132
Re Ohm
3,1
Fs Hz
90
Le mH
0,01
Vas I
4
Mms g
18,9
Cms mm/N
0,15
BL T*m
5,8
Qts
0,88
Qes
1,06
Qms
5,5
Spl dB
92
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D
62,6 mm
2.46 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Pro 3" Midrange Speaker - Pair (Mp 70.3...
$314.99
The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @250Hz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
180 ÷ 18k
Magnet size D x d x h mm (in.)
19.7 x 0 x 2 (0.78 x 0 x 0.08)
Weight of one speaker kg (lb.)
0.17 (0.37)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
D mm
65
Re Ohm
3,7
Fs Hz
110
Le mH
0,12
Vas I
1
Mms g
2,9
Cms mm/N
0,7
BL T*m
2,8
Qts
0,82
Qes
1
Qms
4,6
Spl dB
88
A
87,8 mm
3,46 in.
B
73 mm
2,87 in.
C
50 mm
1.97 in.
D
44 mm
1.73 in.
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Mille Pro 28Mm (1.38") Tweeters And Crossovers - Pair...
$314.99
MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k ÷ 25k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,075 (0.16)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,024
Vas I
-
Mms g
0,4
Cms mm/N
0,08
BL T*m
2
Qts
1,1
Qes
1,7
Qms
3,3
Spl dB
91
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
28 mm
11.1 in.
D
13,5 mm
0.53 in.
E
72 mm
2.8 in.
F
45,6 mm
1.8 in.
G
23 mm
0.9 in.
HERTZ Mille Pro 25Mm (1") Tweeter - Pair (Mp 25.3...
$259.99
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Component
Tweeter
Size mm (in.)
29 (1.14)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
1.4k ÷ 22.5k
Magnet size D x d x h mm (in.)
24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
0.07 (0.14)
Magnet
Neodymium
Dome
Tetolon
D mm
29
Re Ohm
3,9
Fs Hz
1200
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,1
BL T*m
1,6
Qts
0,55
Qes
1,98
Qms
0,57
Spl dB
91
A
44 mm
1.73 in.
B
41 mm
1.61 in.
C
27 mm
1.06 in.
D
17 mm
0.67 in.
HERTZ Mille Pro 6.5" Woofer Component - Pair (Mp 165P.3...
$479.99
The MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
3
Voice Coil Ø
25 (1)
Frequency Response Hz
45 ÷ 4,5k
Magnet size D x d x h mm (in.)
95 x 45 x 17 (3.74 x 1.77 x 0.67)
Weight of one speaker kg (lb.)
1.2 (2.65)
Magnet
High density flux ferrite
Cone
Pressed-pulp cone with cotton fibers
Xmech mm (in.)
±7.5 (0.3)
D mm
132
Re Ohm
2,6
Fs Hz
75
Le mH
0,28
Vas I
8
Mms g
15,1
Cms mm/N
0,3
BL T*m
5,45
Qts
0,56
Qes
0,63
Qms
5,2
Spl dB
94
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74,5 mm
2.93 in.
D
64 mm
2.52 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Pro 6.5" Woofer Component - Pair (Mp 165.3...
$314.99
Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 car audio woofers boast outstanding dispersion features and generates high SPL with compact dimensions, ensuring a wide low frequency response, even in cars with no space for a subwoofer.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
90
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
40 ÷ 5k
Magnet size D x d x h mm (in.)
85 x 32 x 17 (3.35 x 1.26 x 0.67)
Weight of one speaker kg (lb.)
1.07 (2.36)
Magnet
High density flux ferrite
Cone
Pressed-pulp cone with cotton fibers
Xmech mm (in.)
±7 (0.28)
D mm
132
Re Ohm
3,1
Fs Hz
70
Le mH
0,3
Vas I
9,5
Mms g
14,9
Cms mm/N
0,36
BL T*m
5,5
Qts
0,58
Qes
0,67
Qms
4,6
Spl dB
93
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D
63 mm
2.48 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Legend 3" 2-Way Component Speaker - Pair (Mlk...
$1,469.99
The MLK 700.3 Legend car audio speakers system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between ML 1650.3 and ML 1800.3 actively filtered in a multi-amplified configuration. MLK 700.3 Legend is composed of the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound. The V-cone® exponential profile without the traditional dustcap gets close to the perfect one, generating exceptional dispersion: thanks to the synergistic action of these technological elements, ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend. Thanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure. The uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions.
Component
System
Size mm (in.)
70 (3)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Tweeter diaphragm mm (in.)
35 (1.38)
Woofer Voice Coil Ø mm (in.)
20 (0.8)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Sensitivity dB SPL
Midrange 90 Tweeter 92
Frequency Response Hz
200 ÷ 28k
Crossover Cut off
4.5 kHz - 6/12 dB Oct.
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
0,210 (0.46)
Weight of one component - Tweeter kg (lb)
0,1 (0.22)
Weight of one component - Crossover kg (lb)
0,57 (1.26)
D mm
65
Re Ohm
3,8
Fs Hz
110
Le mH
0,05
Vas I
1,1
Mms g
2,7
Cms mm/N
0,7
BL T*m
3,3
Qts
0,57
Qes
0,67
Qms
4
Spl dB
90
HERTZ Mille Legend 3" Midrange Speaker - Pair (Ml 700.3...
$629.99
The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the threespoke anti-resonant aluminium alloy basket with vented holes.Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions.
1. Neodymium magnet optimized with FEA simulations, for superior dynamics and control.2. Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.3. Extremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.4. Exponential V-cone® with optimized geometry for utmost linearity and dispersion.5. CONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.8. Junction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.9. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.10. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.11. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @ 250Hz - 12dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
200 - 20k
Magnet size D x d x h mm (in.)
45 x 25 x 3,5 (1.77 x 0.98 x 0.13)
Weight of one speaker kg (lb.)
0,21 (0.46)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibres
D mm
65
Re Ohm
3,8
Fs Hz
110
Le mH
0,05
Vas I
1,1
Mms g
2,7
Cms mm/N
0,7
BL T*m
3,3
Qts
0,57
Qes
0,67
Qms
4
Spl dB
90
A
87,8 mm
3.45 in
B
74 mm
2.91 in
C
47 mm
1.85 in
D
41,3 mm
1.62 in
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Dieci 6" 2-Way Component Speaker - Pair (Dsk 160.3)
$239.99
Product info:
component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers
6" treated paper woofer with polyurethane surround
separate PEI dome tweeter with external crossover
includes tweeter mounts, plus adapter rings for select GM and Honda vehicles
handles up to 80 watts RMS (180 watts peak power)
frequency range: 50-23,000 Hz
sensitivity: 94 dB (1 watt at 1 meter)
woofer mounting depth: 2-1/4"
impedance: 4 ohms
grilles not included
warranty: 2 years
MFR # DSK 160.3
Item # 301DSK1603
Size Classification Note: Hertz describes these woofers as 6", but they fit many standard 6½" and 6¾" applications. The included adapter brackets are used to fit several specialized factory speaker applications. The brackets are also useful as a spacer in shallow locations; the brackets add just over ¼" to the woofers' mounting height and subtract just over ¼" from the mounting depth. Please enter your vehicle information to confirm fit.
Tweeter Mounting: Brackets are included for flush mounting and angled surface mounting (60° or 30°) the tweeters.
Tweeter Mounting Dimensions:
Flush Mount
60° Angled Surface Mount
30° Angled Surface Mount
Mounting Height
0.366"
1.232"
1.515"
Depth
0.426"
N/A
N/A
Frame Diameter
1.605"
N/A
N/A
Cutout Diameter
1.420"
N/A
N/A
Frame Width
N/A
1.463"
1.463"
Frame Depth
N/A
1.535"
1.255"
Crossovers: The included 48" tweeter wires have high pass crossovers wired in-line. The input end of each wire is terminated with female quick slides that attach to the woofer terminals, and the output end has terminals that mate to the terminals on the wire attached to the tweeters. The crossover point is 3.5 kHz and the slope is 6 dB/octave. Each crossover is approximately 1" long and ⅜" at its widest point. The woofer is not crossed over.
General
Speaker Size
6
Driver Design
2-way
Woofer Design
Cone
Woofer Material
Pressed Paper (Water-Repellent)
Woofer Surround
Polyurethane
Midrange Design
---
Midrange Material
---
Tweeter Design
24mm Dome
Tweeter Material
PEI
Super Tweeter Design
---
Super Tweeter Material
---
Impedance (Ohms)
4
Weather-resistant
No
Grilles Included
No
Parts Warranty
2 Years
Labor Warranty
2 Years
Specifications
Sensitivity (1W at 1 meter)
94
Sensitivity at 2.83 volts
N/A
Frequency Response
50 - 23k Hz
Maximum RMS Wattage
80
Peak Power Handling (Watts)
180
Top-mount Depth (Inches)
2 1/4
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
5 1/16
Mounting Height (Inches)
0.384
Frame Width
6.256
Frame Length
6.256
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
