AUDISON Voce Ii - Crossover Set 3-Way (Avcx 3P)
$579.99
The Audison AVCX 3P is a three-way passive crossover meticulously engineered to facilitate bi-amplification and seamless integration within the Audison VOCE II series. This crossover is specifically designed to harmonize the performance of the AV 3.0 II midrange speaker with other VOCE II components, ensuring a coherent and balanced soundstage. The AVCX 3P’s design supports distinct amplification of the woofer, midrange, and tweeter, allowing for precise control over each frequency band. This setup is ideal for achieving the optimal blend of sound dynamics and clarity, tailored to the sophisticated setups demanded by modern car audio enthusiasts.
AUDISON Prima Line - Coaxial To Toslink Converter, Aux Input...
$304.99
The Audison C2O is a high–precision interface designed to convert both coaxial digital and analog AUX signals into a TOSLINK optical digital output. Supporting resolutions up to 24-bit / 192 kHz, the C2O ensures perfect integration between modern Hi-Res portable players, smartphones, and Audison processors equipped with an optical digital input. Thanks to its ultra-compact design, the C2O can be easily installed in hidden or tight spaces inside the vehicle, minimizing cable length and eliminating noise issues often caused by long signal paths. The C2O is the ideal solution for integrating Hi-Res audio sources into advanced Audison ecosystems, guaranteeing signal integrity, perfect compatibility, and a streamlined installation experience. Its intelligent design and premium components make it indispensable for achieving the highest sound quality in modern car audio systems
Dual Input Conversion:
Converts digital coax (75 Ω) and analog AUX (3.5 mm jack, including 4-pole types) into a high-quality TOSLINK optical output.
High-Resolution Digital Output:
From analog input: 24-bit / 48 kHz
From coaxial digital input: 24-bit / 192 kHz
Smart Input Management:
Automatic input selection with priority to the AUX input. If no analog signal is detected, the device switches to the coaxial input after 6 seconds (adjustable to 9 or 12 seconds via internal switch).
Noise-Free Signal Handling:
The coaxial digital input features an isolation transformer to minimize electromagnetic interference (EMI), ensuring clean and stable signal transmission.
Optimized Analog Input Stage:
Integrated pre-amplifier with adjustable gain (0.1V to 2V) for perfect matching with various devices before high-quality A/D conversion.
Flexible Power Supply Options:
Operates from 6 to 30 VDC, with support for both classic remote turn-on and +12V REM trigger.
AUDISON Prima Line - Tower Kit To Suit Prima Amplifiers...
$209.99
APTK 3 - AUDISON PRIMA TOWER KIT 3With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating. *Does not include Amplifiers*
AUDISON Prima Line - Oem T-Harness (Ap T - H...
$144.99
PRIMA T-HARNESS BMW
T-Harness “DCC” is the Plug&Play solution for BMW to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
Features
Designed specifically for your vehicle
For maximum OEM integration.
Connection to the AP Extension cable through ISO connectors
Possibility to supply power to the amplifier via the direct cockpit current system
Without the need of routing the cable through the engine compartment (with Audison Prima DCC solution).
ACC wire to re-launch ignition key signal to turn on / off an external device*
*In those vehicles featuring ignition key connection wire (ACC wire), see compatibility list
AUDISON Prima Line - Speaker Output Harness (Ap Spk Out...
$114.99
Audison AP SPK OUT 8.9 - PPRIMA Series 8-Channel, Speaker Output extension cable Plug & Play for AP8.9 bit
We are a Audison authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
• Audison Prima AP SPK Out 8.9
Plug&Play Connector
AP SPK OUT 8.9 cable are dedicated to the connection of the AP8.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
AUDISON Prima Line - Plug And Play Harness To Suit...
$279.99
This Plug&Play T-Harness provides the ability to install an Audison AP F on BMW vehicles equipped with RAM module. It’s compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.
Features
Retrieve the OEM source front and rear stereo audio signal.
Route the AP FORZA amp outputs to each of the OEMamplifier seven channels:(Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)The Plug&Play terminals enable the user to choose whichAP FORZA amplifier output to connect to each of the sevenchannels of the OEM audio system.It is also possible to bridge the outputs of the AP FORZAamplifier.
Keep the OEM amplifier on.
The USS1 prevent the speaker diagnostic error of the centerchannel.
AUDISON Prima Line - Oem Harness (Apbmw Reamp 1)
$229.99
This Plug&Play harness allows the replacement of the OEM BMW amplifier with an Audison AP bit or AF bit amplifier on BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options and on BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system. The OEM seven-channel analog amplifier is connected via a forty-two-pin multipolar connector.
Features
Compatible with BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options
Compatible with BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system
Compatible with Audison AF bit amplifier. The use of other products may require modifications and additional connections to the vehicle
Compatible with AP F8.9 bit. The AP F IN ADP adapter is required for full P&P connection.
Confirm proper application: APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable
NOTE: AP BMW ASD BYPASS may also be required in vehicles that have the optional ASD “artificial exhaust sound” feature. Not compatible with current RAM-equipped BMW models using AFBMW ReAMP3, or with MOST-equipped 677/688 systems.
AUDISON Prima Line - Oem Harness (Apbmw Biamp1)
$189.99
This Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The T connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.
AUDISON Prima Line - Oem Speaker Spacer (Apbmw A4E)
$189.99
Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.
AUDISON Prima Line - 5.6M Ap Bit Input Harness (Ap...
$314.99
HERTZ Prima Line - 5.6M Ap Bit Input Harness (Ap 560P&P I/O)
AUDISON Prima Line - 2.6M Ap Bit Input Harness (Ap...
$314.99
Audison AP 260P&P I/O - ISO EXTENSION IN/OUT 260CM/102IN CONNECTION CABL
AUDISON Audison 10" 800W Slimline Loaded Subwoofer Box-SB10SA1
$399.99
The Audison SB10SA1 is a great option for adding powerful bass to your car audio system. This sealed Aerpro 10″ Loaded Slimline Subwoofer Box is designed to save space, with dimensions of 341mm (H) x 485mm (W) and a tapered depth of 85mm to 135mm, making it easy to install in most vehicles. With an internal volume of 11.31 litres and a 232mm mounting cutout, it provides an ideal setup for clean, punchy bass.
The APS10D 800W Subwoofer used is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice coil features push connectors for ease of wiring and configuration. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However, reduced mounting depth traditionally has meant low excursion.
Prima subwoofers employ a special cone-dust cap-basket geometry which guarantees large excursion of the mobile group while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking – -mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom – plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
Please Note: The slimline subwoofer box used is the Aerpro SB10S and is not made by Audison.
Features:
Fits easily in most vehicles without taking up too much space, thanks to its slimline dimensions and tapered depth.
Sealed Enclosure Enhances sound clarity and delivers tight, punchy bass for a more precise audio experience.
Durable 12mm MDF Construction ensures long-lasting performance while minimising vibrations for better sound quality.
Spring-Loaded Banana Socket Terminals allow quick, secure, and hassle-free wiring connections.
Black Carpet Finish blends seamlessly with most car interiors while protecting the enclosure from scratches and wear.
Specially designed cone, dust cap, and basket geometry ensure long linear excursion capability (11mm, One Way) keeping mounting depth to a minimum.
Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
Massive motor assembly, optimized with FEM (Finite Element Modelling) for perfect control under high power, high excursion conditions.
Water-repellent pressed paper 10-inch cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
Designed and engineered to deliver exceptional performance in a sealed enclosure, ensuring powerful bass and precise sound reproduction.
A steel mesh grille and plastic gasket are integrated to protect the subwoofer, ensuring durability and safeguarding against damage.
Specifications:
Type: Sealed Enclosure
Power Handling – MAX: 800W
Power Handling – RMS: 400W
Impedance: 2-Ohm
Voice Coil: Dual (4 + 4)
Volume: 11.31 Litres
Construction: 12mm MDF
Carpet Colour: Black
Terminals: Spring-Loaded Banana Sockets
Dimensions: (H) 341mm x (W) 485mm x Top (D) 85mm x Bottom (D) 135mm
Weight: 9.80kg
AUDISON Prima Line - 8" 500W 4 Ohm Passive Loaded...
$469.99
The APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as cabin gain. The 8-inch single 4 ohm voice-coil subwoofer has a powerful motor that maximizes efficiency. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AF C4.10 bit/AF C4D/AF M4D bridged channels, capable of delivering 260 W rms.
Technical Specs
Nominal diameter
200 mm
Impedance
4 Ohm
Power Handling - Peak
500 W
Power Handling - Continuous
250 W
Magnet Material
HIGH DENSITY FLUX FERRITE
Cone Material
COTTON-FIBRE PRESSES PAPER CONE
Dimensions
Dimension A
470 mm
Dimension B
334 mm
Dimension C
109 mm
Dimension D
131 mm
Dimension C1
131 mm
AUDISON Prima Line - 8" 500W 4 + 4 Ohm...
$469.99
The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AF M5.11 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AF C8.14 bit/AF M8.14 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.
Technical Specs
Nominal diameter
200 mm
Impedance
4+4 Ohm
Power Handling - Peak
500 W
Power Handling - Continuous
250 W
Magnet Material
HIGH DENSITY FLUX FERRITE
Cone Material
WATER REPELLENT PRESSED PAPER
Dimensions
Dimension A
374 mm
Dimension B
334 mm
Dimension C
109 mm
Dimension D
131 mm
AUDISON Prima Line - 8" 500W 0.4 Ohm Active Loaded...
$889.99
The Prima APBX 8 AS2 active subwoofer, with the 8-inch driver, features a dedicated high-performance amplification module that enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size. The amplification module, with power outputs of 250W RMS, is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the He-Li (High-Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes. Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra-low impedance. This feature ensures a perfect synergy with the He-Li (High-Efficiency Low Impedance) technology, maximizing the combination of amplifier, speakers, and sealed box, to obtain low, powerful, and crisp frequencies. The controls section is complete and provides an optimal regulation of the low-frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response on the lower side of the spectrum. The high-level speaker-in input on the multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after-market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source remote signal, by the voltage variation on the high-level input, or by the audio signal on both inputs. Phase control (0 - 180°) completes the equipment. The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.
Technical Specs
Nominal diameter
200 mm
Power Handling - Peak
500 W
Power Handling - Continuous
250 W
Magnet Material
HIGH DENSITY FLUX FERRITE
Cone Material
WATER REPELLENT PRESSED PAPER
Dimensions
Dimension A
368 mm
Dimension B
294 mm
Dimension C
135 mm
Dimension C1
158 mm
AUDISON Prima Line - 10" 800W 4 + 4 Ohm...
$574.99
The APBX 10 DS, a 10 subwoofer loaded in a 12-liter sealed enclosure, is the flagship. It is dedicated to the highest-performing Forza systems, using the AF M1D amplifier for the sub-section. The speaker's mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele & Small parameters set-up provides the ideal balance for all music genres.
Technical Specs
Nominal diameter
250 mm
Impedance
4+4 Ohm
Power Handling - Peak
800 W
Power Handling - Continuous
400 W
Magnet Material
HIGH DENSITY FLUX FERRITE
Cone Material
WATER REPELLENT PRESSED PAPER
Dimensions
Dimension A
470 mm
Dimension B
334 mm
Dimension C
120 mm
Dimension D
142 mm
AUDISON Prima Line - 10" 800W 0.16 Ohm Active Loaded...
$1,049.99
The Prima APBX 10 AS2 active subwoofer, with the 10-inch driver, features a dedicated high-performance amplification module that enhances all the passive box technologies, such as the 2S²(2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size. The amplification module, with power outputs of 400W RMS, is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High-Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes. Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra-low impedance (0.16 ohms for APBX 10 AS). This feature ensures a perfect synergy with the he-li (High-Efficiency Low Impedance) technology, maximizing the combination of amplifier, speakers, and sealed box, to obtain low, powerful, and crisp frequencies. The controls section is complete and provides optimal regulation of the low-frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response on the lower side of the spectrum. The high-level speaker-in input on the multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after-market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source remote signal, by the voltage variation on the high-level input, or by the audio signal on both inputs. Phase control (0-180°) completes the equipment. The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.
Technical Specs
Nominal diameter
250 mm
Power Handling - Peak
800 W
Power Handling - Continuous
400 W
Magnet Material
HIGH DENSITY FLUX FERRITE
Cone Material
WATER REPELLENT PRESSED PAPER
Dimensions
Dimension A
440 mm
Dimension B
334 mm
Dimension C
135 mm
Dimension D
158 mm
AUDISON Prima Line - Oem Harness (Apbmw Biamp2)
$279.99
APBMW BIAMP 2 Plug & Play T-harness provides the ability to:1. Take the front speaker output signal from the OEM head unit through the under-seat woofer connector and route it to the AP bit amplifier input.2. Separately route the signal from the AP bit amplifier outputs to the front midrange housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables.The APBMW BIAMP 2 is compatible only with BMW and MINI vehicles that are not provided with an OEM amplifier. The package contains a pair of cables, for left and right channels. The cables are 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed.
AUDISON Prima Line - 8" 500W 4 Ohm Subwoofer (Aps...
$304.99
With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AF C8.14 bit or AF C4.10 bit / AF C4D / AF M4D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
Technical Specs
Nominal diameter
200 mm (8 in)
Impedance
4 Ohm
Power Handling - Peak
500 W
Power Handling - Continuous
250 W
Sensitivity
84 dB
Voice Coil Ø
40 mm (1.6 in)
Magnet Material
HIGH DENSITY FLUX FERRITE
Magnet size D x d x h
120 x 50 x 28 mm
Cone Material
WATER REPELLENT PRESSED PAPER
Xmax
8.8 mm (0.35 in)
Xmech
16.5 mm (0.65 in)
Driver Displacement Volume
0.67 l (0.024 ft)
Electric-acoustic Specs
Re
3.7 Ohm
Fs
32 Hz
Le
1.45 mH
Vas
26.5 l (0.936 ft)
Mms
80 g (2.822 oz)
Cms
0.33 mm/N
BL
11.5 T•m
Qts
0.41
Qes
0,43
Qms
5.1
General
Weight
3.04 kg
AUDISON Prima Line - 8" 500W 4 + 4 Ohm...
$304.99
The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
Technical Specs
Nominal diameter
200 mm (8 in)
Impedance
4+4 Ohm
Power Handling - Peak
500 W
Power Handling - Continuous
250 W
Sensitivity
83.5 dB
Magnet Material
HIGH DENSITY FLUX FERRITE
Magnet size D x d x h
120 x 50 x 28 mm
Cone Material
WATER REPELLENT PRESSED PAPER
Xmax
8.8 mm (0.35 in)
Xmech
16.5 mm (0.65 in)
Voice Coil Winding Height
40 mm (1.57 in)
Driver Displacement Volume
0.67 l (0.024 ft)
Electric-acoustic Specs
Re
2.1 Ohm
Fs
30 Hz
Le
1.1 mH
Vas
25.5 l (0.901 ft)
Mms
85 g (2.998 oz)
Cms
0.3 mm/N
BL
8.8 T•m
Qts
0.44
Qes
0,46
Qms
5.1
General
Weight
3.1 kg
Dimensions
Dimension A
222 mm (8.74 in)
Dimension B
187 mm (7.36 in)
Dimension C
94.6 mm (3.72 in)
Dimension D
79 mm (3.11 in)
Dimension C1
104 mm
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
