FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,343.60
$2,604.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45. 9'' (W) x 2570mm/101. 2'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45. 3 long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$960.30
$1,067.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45. 9'' (W) x 752mm/29. 6'' (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 750mm/29. 5'' long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Double Jerry Can Holder Replacement Strap - JCHO015
$106.20
$118.00
Front Runner Replacement Top Strap for Jerry Can Holder
Restore the security and functionality of your Front Runner Jerry Can Holder with this replacement top strap. Designed specifically as a replacement for the JCHO014 Jerry Can Holder, this heavy-duty strap securely fastens your jerry cans in place, helping eliminate rattling, movement, and wear during both on-road and off-road travel.
Constructed from black powder-coated stainless steel, the strap is built to withstand harsh environments while providing long-lasting corrosion resistance. The integrated stainless steel cross brace and safety catch ensure your fuel containers remain firmly secured, while the strap design covers the jerry can caps for added security.
Key Features
Replacement top strap designed for the Front Runner JCHO014 Jerry Can Holder.
Securely fastens jerry cans to minimise movement and vibration.
Helps eliminate rattling and wear during travel.
Features a durable stainless steel cross brace.
Integrated safety catch for enhanced security.
Strap covers the jerry can caps for additional protection.
Compatible with padlocks for theft deterrence.
Manufactured from black powder-coated stainless steel.
Benefits
Provides a secure, no-rattle mounting solution.
Helps protect jerry cans from damage caused by movement.
Offers added security when used with a compatible padlock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Designed specifically as a replacement for the Front Runner JCHO014 Jerry Can Holder.
Compatible with optional padlocks, including RRAC134.
Important Information
This product includes the replacement top strap only.
Jerry can holder, jerry cans, and padlock are sold separately.
Ensure proper installation before use.
Construction
Material: Black powder-coated stainless steel.
Corrosion-resistant finish for long-term durability.
Designed for rugged touring and off-road applications.
FRONT RUNNER Land Rover Defender (1983-2016) Rear Bumper Bracket For...
$125.10
$139.00
Front Runner Hi-Lift Jack Rear Bumper Mount for Land Rover Defender
Carry your Hi-Lift Jack securely without the need for a roof rack using the Front Runner Hi-Lift Jack Rear Bumper Mount. Specifically designed for the Land Rover Defender, this rugged mounting solution allows you to store your jack conveniently on the rear bumper for quick access when recovery situations arise.
Constructed from black powder-coated high-strength steel, this durable two-piece bracket is engineered to withstand harsh weather conditions, rough tracks, and demanding off-road use. The rear bumper mounting position provides easy access to your Hi-Lift Jack without the need to climb onto your vehicle, making recovery equipment more accessible when you need it most.
In addition to its practical functionality, this bumper mount adds a distinctive off-road appearance to your Defender, enhancing both style and capability.
Key Features
Designed specifically for Land Rover Defender vehicles.
Securely mounts a 1.2m Hi-Lift Jack to the rear bumper.
Heavy-duty two-piece mounting bracket design.
Manufactured from high-strength steel.
Black powder-coated finish for corrosion resistance.
Lockable design for added security.
Provides quick and easy access to your recovery jack.
Enhances the rugged appearance of your Defender.
Benefits
Eliminates the need for roof rack-mounted jack storage.
Keeps recovery equipment easily accessible.
Protects your jack during off-road travel.
Offers a secure and convenient mounting solution.
Adds a functional off-road aesthetic to your vehicle.
Compatibility
Suitable for Land Rover Defender models.
Designed to carry one 1.2m Hi-Lift Jack.
Compatible with user-supplied padlocks for added security.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Built for long-term durability and outdoor use.
Important Information
Hi-Lift Jack sold separately.
Padlock not included.
Professional installation is recommended if you are unfamiliar with vehicle accessory fitting.
FRONT RUNNER Hi-Lift Jack Bracket / Top Mount - JADA014
$163.80
$182.00
Front Runner Hi-Lift Jack Roof Rack Mount Brackets
Securely mount your Hi-Lift Jack to your Front Runner Roof Rack with these purpose-built Hi-Lift Jack Mount Brackets. Designed to bolt directly into the T-slots of Front Runner rack systems, these brackets provide a strong, reliable, and easily accessible storage solution for your recovery jack.
The two-piece bracket system accommodates all sizes of Hi-Lift Jacks and keeps them securely mounted during both on-road and off-road travel. The innovative handle bracket opens for quick access when needed, while the lockable design provides added security when paired with the optional RRAC134 lock.
Manufactured from durable steel and finished with Front Runner's weather-resistant black powder coating, these brackets are built to withstand harsh outdoor conditions and years of adventure.
Key Features
Designed to mount Hi-Lift Jacks directly to Front Runner Roof Racks.
Bolts securely into the rack's T-slot system.
Compatible with all Hi-Lift Jack sizes.
Two-piece bracket design for secure retention.
Opening handle bracket allows easy access to the jack.
Lockable handle bracket for added security.
Compatible with the Front Runner RRAC134 lock.
Durable steel construction with black powder-coated finish.
Benefits
Keeps your Hi-Lift Jack securely mounted and readily accessible.
Maximises storage space on your vehicle.
Reduces movement and vibration during travel.
Provides added theft protection when used with a compatible lock.
Built to withstand harsh off-road and weather conditions.
Compatibility
Suitable for all Hi-Lift Jack sizes.
Designed for Front Runner Roof Rack systems with T-slot channels.
Compatible with RRAC134 lock for additional security.
Construction
Material: Steel.
Finish: Black powder-coated.
Weather-resistant and corrosion-resistant construction.
Important Information
Hi-Lift Jack sold separately.
RRAC134 lock sold separately.
Ensure all mounting hardware is properly tightened before use.
FRONT RUNNER Hi-Lift Jack Bracket - JADA010
$184.50
$205.00
Front Runner Hi-Lift Jack Side Mount Brackets for Slimline II Roof Racks
Keep your recovery gear secure and easily accessible with the Front Runner Hi-Lift Jack Side Mount Brackets. Designed specifically for the Front Runner Slimline II Roof Rack, these heavy-duty brackets allow you to mount a Hi-Lift Jack neatly along the side rails of your rack, maximizing cargo space while keeping essential recovery equipment within reach.
Constructed from heavy-gauge steel and finished with Front Runner's durable weather-resistant black powder coating, these brackets are built to withstand harsh outdoor conditions and years of off-road use. The two-piece design securely holds both the jack base and handle, helping prevent movement and rattling during travel.
For added security, the handle bracket is lockable using a small wire lock such as the Master Lock Luggage Lock Model 4688D, helping protect your Hi-Lift Jack from theft while parked or travelling.
Key Features
Designed for mounting Hi-Lift Jacks to the side rails of Front Runner Slimline II Roof Racks.
Fits all Hi-Lift Jack sizes.
Heavy-gauge steel construction for maximum strength and durability.
Weather-resistant black powder-coated finish.
Two-piece bracket system secures both the jack handle and base.
Lockable design for added security.
Helps prevent movement, rattling, and wear during travel.
Easy bolt-on installation.
Benefits
Keeps your Hi-Lift Jack secure and readily accessible.
Frees up valuable cargo space inside your vehicle.
Provides a clean and organised roof rack setup.
Offers additional theft protection when used with a compatible lock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Suitable for all Hi-Lift Jack sizes.
Compatible with Front Runner Slimline II Roof Racks.
Works with small wire locks such as the Master Lock Luggage Lock Model 4688D.
Not compatible with the Front Runner Slimsport Rack Kit range.
Construction
Material: Heavy-gauge steel.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Important Information
Hi-Lift Jack and lock sold separately.
Designed specifically for Front Runner Slimline II Roof Rack systems.
Not compatible with Front Runner Slimsport Rack Kits.
FRONT RUNNER Hi-Lift Jack Base Plate - JADA004
$112.50
$125.00
Front Runner Hi-Lift Jack Base Plate - JADA004
Improve the safety and stability of your vehicle recoveries with the Front Runner Hi-Lift Jack Base Plate. Designed to provide a solid foundation for your Hi-Lift jack, this essential recovery accessory helps prevent the jack from sinking into soft ground such as sand, mud, gravel, and other unstable surfaces.
Constructed from durable high-density polyethylene (HDPE), the base plate offers exceptional strength while remaining lightweight and easy to carry. Its textured surface enhances grip between the jack and the plate, helping to maintain stability and reduce movement during lifting operations.
Compact and easy to store in your vehicle, the Hi-Lift Jack Base Plate is an essential addition to any recovery kit, providing increased confidence and safety when tackling challenging off-road terrain.
Key Features
Provides a stable foundation for Hi-Lift jacks on soft or uneven terrain.
Helps prevent the jack from sinking into sand, mud, gravel, and loose surfaces.
Manufactured from durable high-density polyethylene (HDPE).
Textured surface improves grip and stability during lifting.
Lightweight design for easy transport and handling.
Compact size allows convenient storage in your vehicle.
Resistant to cracking, warping, and harsh outdoor conditions.
Ideal for off-road recovery and remote area travel.
Benefits
Improves safety when using a Hi-Lift jack on unstable ground.
Distributes weight over a larger surface area to reduce sinking.
Enhances lifting stability and confidence during vehicle recovery.
Provides reliable performance in a variety of off-road environments.
Easy to carry and store without taking up significant space.
Construction
Material: High-density polyethylene (HDPE).
Strong, lightweight, and weather-resistant.
Designed to withstand demanding off-road conditions.
Ideal Applications
4WD and off-road vehicle recovery.
Sand, mud, gravel, and uneven terrain.
Touring, overlanding, camping, and remote area travel.
Important Information
Designed for use with Hi-Lift jacks.
Always follow the jack manufacturer's safety guidelines during use.
Inspect the base plate regularly for damage before use.
FRONT RUNNER 4X4 DS50 Drop Slide™ Fridge Slide 50L–80L -...
$314.10
$349.00
MSA 4X4 DS50 Drop Slide™ Fridge Slide
Product Code: DS50
The MSA 4X4 DS50 Drop Slide™ is the ultimate fridge access solution for 4WD touring, camping, caravans, camper trailers, and canopy setups. Designed to provide safe and convenient access to portable fridges, toolboxes, and generators, the patented Drop Slide™ lowers your fridge by 300mm while extending it further beyond the vehicle for effortless access.
Using MSA's innovative lowering mechanism, the platform remains perfectly level throughout operation while avoiding contact with your vehicle. This makes accessing food, drinks, and camping supplies significantly easier, particularly in lifted vehicles and high canopy installations.
Built to withstand Australia's toughest touring conditions, the DS50 features a heavy-duty powder-coated steel frame, stainless steel hardware, and MSA's signature blue anodised aluminium faceplate. The compact design maximises available storage space while the lock-in and lock-out safety system secures the slide during operation and transport.
Features
Patented Drop Slide™ design
300mm controlled lowering action
Compact space-saving design
Easy installation with pre-drilled mounting holes
Lock-in and lock-out safety system
Heavy-duty powder-coated steel frame
Stainless steel and blue anodised aluminium fittings
Travel lock and key included
Suitable for fridges, generators, and storage systems
Compatible with MSA 4X4 Fridge Barriers
All fixing hardware and tie-down straps included
Backed by MSA 4X4's Lifetime Guarantee
Specifications
Product Code: DS50
Weight: 35kg
Fridge Tray Size: 810mm x 480mm
Slide Length (Closed): 880mm
Slide Length (Open): 1860mm
Overall Width: 590mm
Handle Width: 535mm
Drop Distance: 300mm
Gas Strut Rating: 800N
Freight Dimensions: 860mm x 690mm x 170mm
Freight Weight: 38kg
Frequently Asked Questions
What size fridge will fit the MSA DS50 Drop Slide™?
The DS50 is designed to suit many popular portable fridge models typically ranging from 50L to 80L. We recommend checking your fridge dimensions against the tray size before purchasing.
How far does the DS50 Drop Slide™ lower?
The DS50 lowers approximately 300mm while extending out from the vehicle, making it easier to access fridges installed in canopies, wagons, and touring setups.
Can the DS50 be installed in a canopy or caravan?
Yes. The DS50 is suitable for 4WD wagons, ute canopies, caravans, camper trailers, and touring vehicles where easier fridge access is required.
FRONT RUNNER Land Rover Defender 110 (1983-2016) Sill Protector /...
$197.10
$219.00
Front Runner Land Rover Defender 110 Sill Protector Black - BPLD003
Protect your vehicle's door sills from everyday wear and off-road damage with the Front Runner Sill Protector for the Land Rover Defender 110. Designed specifically for Defender 110 models, these durable aluminium tread plates provide an extra layer of protection against scratches, dents, scuffs, and impacts.
Manufactured from 1.6mm thick aluminium and finished in a tough black powder coating, the sill protectors are built to withstand harsh conditions while complementing the rugged appearance of your Defender. Whether you're frequently entering and exiting the vehicle, loading equipment, or tackling challenging terrain, these protectors help preserve your vehicle's bodywork and maintain its appearance.
Key Features
Designed specifically for Land Rover Defender 110 models (1983–2016).
Provides added protection for vehicle door sills and corners.
Manufactured from durable 1.6mm thick aluminium tread plate.
Black powder-coated finish for enhanced durability and corrosion resistance.
Helps prevent dents, scratches, scuffs, and impact damage.
Enhances the rugged appearance of the vehicle.
Built to withstand demanding off-road and touring conditions.
Benefits
Protects vulnerable sill areas from everyday wear and tear.
Reduces the risk of costly bodywork repairs.
Maintains the appearance and value of your vehicle.
Provides long-lasting protection in harsh environments.
Complements the Defender's rugged styling.
Construction
Material: 1.6mm thick aluminium tread plate.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Compatibility
Suitable for Land Rover Defender 110 models (1983–2016).
Engineered for a precise vehicle-specific fit.
Important Information
Designed specifically for Defender 110 models.
Please verify vehicle compatibility before purchase.
Professional installation is recommended if required.
FRONT RUNNER Wolf Pack Pro Cargo System Bracket - PBAC001
$149.40
$166.00
Mount or remove your Wolf Pack Pros in seconds from your Pro Bed System or Pro Bed Rack Kit with this specially-designed side-mounting system. These durable brackets will hold your storage bin securely in place through any terrain while giving you easy access to all your adventure gear when you need it.
This Cargo System Bracket secures the Wolf Pack Pro to the side of the Pro Bed System and Pro Bed Rack Kit.
The Wolf Pack Pro is side-mounted, allowing quick and easy access to all your adventure gear while keeping it safe from the elements.
Made of high-strength steel and sealed with the same durable, weather-resistant powder coating as the Front Runner Racks.
The top and bottom latches are lockable with a Rack Accessory Lock / Small, preventing unwanted access.
Features
Consists of:
2 x Mounting Brackets
2 x Latches
Hardware Kit
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
289mm (11.4") L x 486mm (19.1") (W) x 492mm (19.4") H
Weight:
3.66kg (8.07lbs)
FRONT RUNNER Toyota Land Cruiser 60 Slimline Ii Roof Rack...
$2,239.20
$2,488.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for all 60 and 80 series Toyota Land Cruisers contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL033L - Toyota Land Cruiser 60 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x LASD103 - No 3 Leg Diagonal 155mm (Pair) - by Front Runner
2 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTJ11 - Slimline II Tray - 1425mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (73lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.6kg (85.0lbs)
FRONT RUNNER Load Bar Kit Gutter Mount Fits Toyota Quantum...
$502.20
$558.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTQ004 - Toyota Quantum (2004-2018) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 119mm (5")
Length 1551mm (61")
Height 178mm (7")
Shipping Weight:
Weight 8.9kg (19.7lbs)
FRONT RUNNER Slimline Ii Roof Rack Kit Low Profile Fits...
$1,714.50
$1,905.00
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Tundra Crew Max. Drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTT008T - Toyota Tundra Crew Max (2022-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATT009 - Toyota Tundra CrewMax (2022-Current) Low Foot Rail
1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 33.23kg (73.26lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 34kg (75lbs)
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$2,351.70
$2,613.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1964mm/77.3" (L)), 2 Tracks, and 8 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
This rack fits a load bed width of 1495mm - 1575mm (58-62") and length of 2033mm - 2438mm (80-96").
Features
KRLB021T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1425(W) x 1964(L) - by Front Runner
Consisting of:
4 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
1 x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.3kg (90.9lbs)
FRONT RUNNER Toyota Tacoma 4Th Gen Double Cab (2024-Current) Slimsport...
$161.10
$179.00
Get your Toyota Tacoma Double Cab ready for camping and overland adventures with the dynamic and functional Slimsport Roof Rack Kit; its clever design allows for the fitment of a 40” lightbar for after-dark adventures, while the included wind fairing will keep the noise levels (and fuel consumption) right down.
Lightbar wind fairing for Toyota Tacoma 4th Gen Double Cab (2024-Current) Slimsport Roof Rack Kit / Lightbar ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Wind FairingHardware KitFitment Guide
Materials used:Black powder-coated mild steel
Product Dimensions:75mm (3") L x 1195mm (47.1") W x 200mm (7.9") H
Weight:3.05Kg (6.7lbs)
FRONT RUNNER Toyota Tacoma (2005-2023) Slimline Ii Roof Rack Kit...
$1,268.10
$1,409.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Tacoma 2005+. Easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit will allow your sunroof to open completely, but it will not allow the sunroof to be operated in tilt/vent mode. If you would like to operate the sunroof in tilt/vent mode, you can use Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit, provided that you do not mount a table underneath.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTT005T - Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATT004 - Toyota Tacoma (2005-Curr) Foot Rails/Low Profile1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.51kg (54.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1610mm (63"); Height: 240mm (9")
Shipping Weight:
Weight: 24.53kg (54lbs)
FRONT RUNNER Toyota Land Cruiser 80 Load Bar Kit /...
$468.00
$520.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTL037 - Toyota Land Cruiser 80 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 115mm (5")
Length 1455mm (57")
Height 180mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)
FRONT RUNNER Toyota Land Cruiser 100 Series Slimsport Roof Rack...
$1,484.10
$1,649.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2280mm (89.8") x 1289mm (50.7").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40 LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Features
KSTL003T - Toyota Land Cruiser 100 Series Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray
1x RRAC282 - Toyota Lnd Crusr 100 series Slmsprt 40" lgt Bar W
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 36.99kg (81.55lbs)
Assembled Rack Kit Dimensions:
2280mm (89.8") L x 1289mm (50.7") W x 150mm (5.9") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 39kg (86lbs)
FRONT RUNNER Toyota Land Cruiser 200/Lexus Lx570 Slimline Ii 1/2...
$1,480.50
$1,645.00
This 1156mm/ 45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Land Cruiser 200 or Lexus LX570. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: For fitment to the Lexus LX570, the flush roof rails are required to be removed and the headliner will need to be lowered.
Features
KRTL032T - Toyota Land Cruiser 200 Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATL001 - Toyota Land Cruiser 200 Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.8kg (72.1lbs)
FRONT RUNNER Toyota Land Cruiser 100/Lexus Lx470 Slimline Ii Roof...
$2,114.10
$2,349.00
This 1964mm/77.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 100/Lexus LX470. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL029T - Toyota Land Cruiser 100 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATL002 - Toyota Land Cruiser 100 Foot Rails - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.5kg (91.3lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
