All Categories

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2570mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS013 - Expedition Rail Kit - Sides - for 2570mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2570mm (101.2") L x 1255mm (49.4") W x 63mm (2.5") H Weight:6.34 kg (14 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2368mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS012 - Expedition Rail Kit - Sides - for 2368mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2368mm (93.2") L x 1165mm (45.9") W x 63mm (2.5") H Weight:5.97 kg (13.2 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2166mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3") L x 1165mm (45.9") W x 63mm (2.5") H Weight:5.69 kg (12.5 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2368mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS012 - Expedition Rail Kit - Sides - for 2368mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2368mm (93.2") L x 1425mm (56.1") W x 63mm (2.5") H Weight:6.34 kg (14 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1964mm (77.3") L x 1425mm (56.1") W x 63mm (2.5") H Weight:5.54 kg (12.2 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2368mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS012 - Expedition Rail Kit - Sides - for 2368mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2368mm (93.2") L x 1255mm (49.4") W x 63mm (2.5") H Weight:6.11 kg (13.5 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1762mm (69.4") L x 1345mm (53") W x 63mm (2.5") H Weight:5.17 kg (11.4 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2166mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3") L x 1425mm (56.1") W x 63mm (2.5") H Weight:6.06 kg (13.4 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1964mm (77.3") L x 1345mm (53") W x 63mm (2.5") H Weight:5.42 kg (12 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2166mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3") L x 1345mm (53") W x 63mm (2.5") H Weight:5.94 kg (13.1 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2166mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3") L x 1255mm (49.4") W x 63mm (2.5") H Weight:5.38 kg (12.8 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1762mm (69.4") L x 1425mm (56.1") W x 63mm (2.5") H Weight:5.29 kg (11.7 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H Weight:4.88 kg (10.8 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Features Consisting of: 1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W) 1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used: Black epoxy powder - coated T6 aluminium High strength steel Product Dimensions: 1560mm (61.4") L x 1425mm (56.1") W x 63mm (2.5") H Weight: 5 kg (11 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1964mm (77.3") L x 1165mm (45.9") W x 63mm (2.5") H Weight:5.17 kg (11.4 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1560mm (61.4") L x 1425mm (56.1") W x 63mm (2.5") H Weight:5 kg (11 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1560mm (61.4") L x 1475mm (58.1") W x 63mm (2.5") H Weight:5.07 kg (11.2 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1762mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H Weight:5.05 kg (11.1 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1762mm (69.4") L x 1475mm (58.1") W x 63mm (2.5") H Weight:5.36 kg (11.8 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1358mm (53.5") L x 1425mm (56.1") W x 63mm (2.5") H Weight:4.5 kg (9.9 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1560mm (61.4") L x 1165mm (45.9") W x 63mm (2.5") H Weight:4.63 kg (10.2 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Rail Left Hand & Right Hand Drop sets. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Please note that the new Expedition Rail LH + RH Drop sets Expedition Rail LH & RH Drop Set replace the old Expedition Rail Corner sets Expedition Rail Corner Set (Pair), which result in gaps between the rail corners. Additionally, the side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information. DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets! Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back -1255mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1358mm (53.5") L x 1255mm (49.4") W x 63mm (2.5") H Weight:4.26 kg (9.4 lbs)

Dometic PerfectWall Awning Angled Mounting Bracket - RRAC305 Securely mount your Dometic PerfectWall Awning to your Front Runner Slimline II Roof Rack with the Dometic PerfectWall Awning Angled Mounting Bracket. Specifically engineered to provide the correct fit, clearance, and support, this bracket kit ensures a strong and reliable awning installation for touring, camping, and overlanding adventures. The angled bracket design positions your awning correctly while maintaining proper alignment and clearance from the roof rack system. Manufactured from high-strength steel and finished in a durable black powder coating, these brackets are built to withstand harsh weather conditions, rough tracks, and long-term outdoor exposure. Supplied as a complete mounting kit with all required hardware, installation is straightforward, allowing you to seamlessly integrate your Dometic PerfectWall Awning into your Front Runner rack setup. Key Features Designed specifically for Dometic PerfectWall Awnings. Compatible with Front Runner Slimline II Roof Rack systems. Angled bracket design provides correct fitment and clearance. High-strength steel construction for maximum durability. Black powder-coated finish for corrosion resistance. Weather-resistant design suited for outdoor and off-road use. Provides a secure and stable awning mounting solution. Supplied with all required mounting hardware. Benefits Ensures proper awning positioning and alignment. Provides a strong and reliable mounting platform. Helps withstand vibrations and impacts during off-road travel. Protects against rust and corrosion in harsh environments. Allows seamless integration with Front Runner roof rack systems. Construction Material: High-strength steel. Finish: Black powder-coated. Corrosion-resistant and weather-resistant construction. Compatibility Dometic PerfectWall Awnings. Front Runner Slimline II Roof Rack systems. What's Included Dometic PerfectWall Awning Angled Mounting Brackets. Complete mounting hardware kit. Installation components required for fitment. Important Information Designed specifically for Dometic PerfectWall awning applications. Please verify awning and rack compatibility before purchase. Professional installation is recommended if you are unfamiliar with awning mounting systems.

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1475mm (58.1") W x 63mm (2.5") H Weight:4.57 kg (10.1 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1560mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H Weight:4.76 kg (10.5 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1345mm (53") W x 63mm (2.5") H Weight:4.38 kg (9.7 lbs)

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1165mm (45.9") W x 63mm (2.5") HWeight:4.13 kg (9.1 lbs)

The Jeep Wrangler roof rack 4xe Extreme mounting system bolts to existing mounting points on the chassis and roll cage. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. These Foot Rails allow for a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table) to be fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab. *Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide. Note: This Kit is not Suitable for the Mojave Edition   KRJW039T - Jeep Wrangler 4xe (2021-Current) Extreme Slimline II Roof Rack KitConsisting of:1x FAJL002 - Jeep Wrangler JL (2018-Curr) Foot Rails1x FAJL003 - Jeep Wrangler JL (2018-Curr) Inner Brackets1x FAJL008 - Jeep Wrangler JL/4xe(18-Curr)Front Bar RRack Mount1x RRSTJ12 - SLII Tray - 1425mm(W)X2368mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.64kg (100.62lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 410mm (16")Shipping Weight:Weight: 53kg (117lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Ineos Grenadier contains Slimline II Tray and Wind Deflector, 6 Gutter Mount legs, as well as 8 Ineos Grenadier Grab Handle brackets for mounting the Tray to the vehicle. This kit has space for mounting one Front Runner table or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* KRIG007T - Ineos Grenadier (2022-Curr) Slimline II 3/4 Roof Rack KitConsisting of:1x FAIG001 - Ineos Grenadier Grab Handle Brackets3x LASS040 - Leg Spacer 10mm (Pair)3x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 46.38kg (102.25lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 330mm (13")Shipping Weight:Weight: 48kg (106lbs)

This 1156mm/45.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a limited lifetime warranty* Note: Under-rack accessories and some side-mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.

This 2570mm/109.1" long full-size Slimline II cargo carrying roof rack kit for the Ineos Grenadier contains Slimline II Tray and Wind Deflector, 8 Gutter Mount legs, as well as 8 Ineos Grenadier Grab Handle brackets for mounting the Tray to the vehicle. This kit has space for mounting one Front Runner table or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRIG006T - Ineos Grenadier (2022-Current) Slimline II Roof Rack KitConsisting of:1x FAIG001 - Ineos Grenadier Grab Handle Brackets4x LASS040 - Leg Spacer 10mm (Pair)4x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 57.26kg (126.24lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 330mm (13")Shipping Weight:Weight: 58kg (128lbs)

Get set for customized weekend getaways and sporty adventures with the Mazda BT50 Slimsport Roof Rack Kit. Attach your rack accessories using the T-slots found in the slats. The included wind fairing on this sleek rack ensures rack noise is minimal.     This low profile flat deck Slimsport rack has a load-carrying area of 1413mm (55.6") L x 1141mm (44.9"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Fitment guide and all mounting hardware included. Note: Drilling maybe required for some models. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner's Adjustable Rack Cargo Chocks can be used to brace and secure a variety of gear on a Front Runner Rack. These chocks wedge against and secure the corners or sides of your gear to prevent movement and rattling. Adjustable along the slats to resize and fit a variety of gear like the Wolf Pack Pro, Cub Pack, Typhoon Bag, Expander Camping Chair, and water tanks. Secures to your rack using Eye Nuts and supplied hardware. Eye Nuts create lashing points to secure cargo using Stratchits* *Note: Purchase Wolf Packs, Cub Packs, Stratchits etc. separately.   Consists of:4 x Rack Cargo Chocks4 x Eye NutsInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:100mm (3.9") L x 82mm (3.2") W x 42mm (1.7") H (Per Bracket)Weight:1.04kg (Per Set of 4)

Turn your Ford-150 into the ultimate gear carrier with the Pro Bed Rack System and a Slimline II Rack. Now you can enjoy easy side access to all the Pro Bed Pro Bed Rack-specific accessories, such as the Molle Panel and Recovery Device Mount, while taking advantage of the extra free space in the load bed. Customize your Slimline II Rack for any adventure thanks to the 55 plus available rack accessories. This Pro Bed Rack Kit is specifically designed to fit the Ford F-150 6.5' load bed. Included in this Kit is the a 1425mm/56.1" x 1964mm/77.32" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket,Pro Bed Rack Headboard Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Ford F-150 6.5' with specific mounting brackets. Drilling is required for fitment.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please PBFF004T - Ford F-150 6.5' Bed (2009-Current) Pro Bed Rack Kit Consisting of:4x FASS025 - Foot Set / 70mm - 80mm1x PBFF004S - Ford F-150 6.5" Bed (2009-Current) Pro Bed System1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumInstalled height from load bed ledge:640mm/ 25.19" Approximate Installed Weight: 83kg (182.98lbs) Shipping Dimensions:Width: 640mm (25")Length: 1820mm (72")Height: 490mm (19") Shipping Weight:Weight: 83kg (183lbs)

Double up the loading space on your Ram 1500/2500/3500 with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ram 1500/2500/3500. This kit creates a full-size rack that sits above your Ram 1500/2500/3500’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 2368mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:4x LASS027 - Leg Spacer 6mm (Pair)4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44.65kg (98.44lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 46kg (101lbs)

This lightbar-ready Slimsport Roof Rack Kit offers a sleek storage solution for the Lexus GX 550. It’s perfect for nighttime adventures, thanks to the 40’ cutout for a light bar. The T-slots on the rack’s strong slats can easily accommodate sports and camping gear accessories.    This low-profile flat deck Slimsport rack has a load carrying area of 2210mm (87") L x 1200mm (47.2") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet. Included in the Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing allows the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSLE003T - Lexus GX 550 (2024-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC341 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 40kg (88lbs)

The Slimsport Roof Rack Kit offers a sleek storage solution for the Lexus GX 550. Safely carry all your sports and camping gear, so you can get kitted for any adventure. Includes noise-reducing, aerodynamic wind fairing.   This low-profile flat deck Slimsport rack has a load-carrying area of 2210mm (87") L x 1200mm (47.2") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSLE002T - Lexus GX 550 (2024-Current) Slimsport Roof Rack KitConsisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC340 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 40kg (88lbs)

FATZ FABRICATION High Flow Airbox – Toyota LandCruiser 300 Series Take your 300 Series LandCruiser to the next level with the FatZ High Flow Airbox, designed to improve induction performance while maintaining a clean, factory-style appearance in the engine bay. Part of the FatZ X-Series range, this airbox is engineered using advanced 3D modelling and precision rotational moulding to deliver excellent airflow, lightweight construction and long-term durability. Key Features High-flow induction design for improved airflow Designed specifically for the Toyota LandCruiser 300 Series Precision rotational moulded construction Lightweight and durable design Fully moulded ducting system for improved fitment OEM-inspired finish for a clean factory-style appearance Designed to minimise flow restrictions in high-performance applications Supplied with an air filter of your choice Optional additional filter available at a discounted price Designed for Performance The FatZ High Flow Airbox has been developed from the ground up to optimise airflow through the induction system. Its fully moulded ducting is designed to integrate seamlessly with the engine inlet, helping provide consistent airflow while reducing potential fitment inconsistencies. The result is a high-quality induction solution that combines performance, durability and a factory-style appearance. Filter Options Every FatZ High Flow Airbox is supplied with an air filter of your choice. You can also add an additional filter to your order at a discounted price. SKU: FF300-AB Kit includes: Airbox with filter, Clear lid, instructions. *Snorkel compatibility only guaranteed with Fatz Built snorkel at release of product. Note: This product is available on back-order.

Mitsubishi Triton MV 02/2024 Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM2850 Suits Mitsubishi Triton MV 02/2024 Current Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Heated – Heated mirror glass to demist in cold or wet conditions BSM – Blind Spot Monitoring to alert you to vehicles beside you Power Fold – Power-fold function, mirrors fold in and out with the vehicle Camera Provision – 360 degree camera provision for compatible camera systems Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Mitsubishi Triton MV 02/2024 Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM2850 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Unlock the full potential of your vehicle with the TORQIT ModuleMap — a powerful remote ECU tuning solution designed to safely increase performance, power, and torque without the need for a dyno. Remote ECU tuning – Optimise your vehicle straight from your driveway using a laptop with USB connection 3 selectable drive modes – Switch between Cruise, Sport, and Standard to suit your driving needs Cruise mode – Improved efficiency and torque, perfect for towing caravans, boats, or trailers Sport mode – Maximum performance output for increased power and responsiveness Standard mode – Revert back to factory settings anytime Custom calibration – Tailored to your vehicle and aftermarket mods like exhaust, snorkel, tyres and more Dyno-tested performance – Developed through extensive in-house dyno and road testing Safe and reliable – Maintains OEM safety parameters without pushing your engine beyond limits Noticeable gains – Enhanced throttle response, increased torque, and improved drivability How It Works TORQIT’s ModuleMap uses pre-developed dyno-tested data to remotely tune your vehicle. Each tune is built from a proven performance baseline, ensuring accurate and reliable results without requiring a physical dyno session. What to Expect Increased power and torque Better towing performance Improved overall driving experience Flexible tuning at your control Part Number VISMMP15

TORQIT ModuleMap 14 – Remote ECU Tuning Solution Part Number: VISMMP14 TORQIT’s ModuleMap is an ultra-fast and powerful ECU programming solution designed to remotely calibrate and optimise your vehicle’s factory settings. Built from extensive dyno-tested data, ModuleMap enhances your vehicle’s performance while maintaining OEM safety and reliability. Key Features Remote ECU tuning – no workshop visit required Noticeable increase in power and torque Improved performance for towing caravans, boats, and trailers Maintains factory safety limits and reliability Customised tuning based on your vehicle’s modifications 3 Driving Modes Cruise Mode: Optimised for everyday driving and towing heavy loads Sport Mode: Maximum performance for enhanced power and torque Standard Mode: Reverts your vehicle back to factory settings How It Works ModuleMap allows you to remap your vehicle directly from your driveway using a simple plug-and-play setup. Your vehicle is remotely tuned by experienced software technicians with over 40 years of combined industry experience. Dyno-Tested Performance All TORQIT tunes are developed and stress-tested on a dynamometer (dyno), simulating real driving conditions. Each vehicle platform undergoes approximately 20 hours of R&D, including testing with aftermarket modifications such as exhaust systems, snorkels, and turbos. This ensures every tune is precise, reliable, and tailored to your vehicle. Customised for Your Vehicle ModuleMap adapts to your specific setup, including modifications like exhaust systems, tyres, and snorkels. It also allows control over when peak power is delivered, ensuring optimal performance across different driving conditions. Safe & Reliable TORQIT tuning solutions are engineered to stay within your vehicle’s safe operating limits. You can expect increased performance without compromising reliability or longevity.

TORQIT Performance Exhaust Manifold – SUZUKI JIMNY 2018+ Designed specifically for SUZUKI JIMNY models (XL 5-Door, GLX & Lite 3-Door), TORQIT’s Performance Exhaust Manifold replaces the restrictive factory unit to deliver improved exhaust flow, increased power, and enhanced engine efficiency. Developed over 5 years, this high-performance manifold is engineered to reduce back pressure and improve overall engine performance—perfect for drivers looking to maximise power or reduce engine strain when towing or under load. Key Benefits Increased exhaust flow for improved power and torque Reduced engine strain under load or towing conditions Enhanced exhaust note and efficiency Direct replacement for factory manifold Premium Construction Manufactured in Australia, TORQIT Performance Headers are mandrel bent from premium-grade steel. Unlike restrictive cast iron factory manifolds, the smooth and consistent pipe diameter ensures unrestricted airflow and improved performance. Mandrel bent steel for maximum flow and precision fitment Consistent pipe diameter reduces back pressure High-quality construction for long-term durability Turbo X Ceramic Coating Each manifold is coated with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves longevity and performance Installation & Compatibility Bolt-on installation Compatible with SUZUKI JIMNY 2018+ (XL, GLX, Lite) Recommended Upgrade For maximum performance gains and a deeper, more aggressive exhaust note, pair this manifold with a TORQIT Cat-Back Exhaust System. Warranty & Origin 3-year product warranty Proudly made in Australia

TORQIT Performance Exhaust Headers – CHEVROLET SILVERADO 2020+ Part Number: TPH03 Upgrade your CHEVROLET SILVERADO with TORQIT’s Performance Exhaust Headers, designed to replace the restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide a noticeable improvement in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Silverado headers feature a long tube design, where the pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports better fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance gains, pair these headers with a TORQIT Silverado Performance Exhaust System. Designed with a single 3.5" pipe into twin 3" tailpipes, it delivers a powerful V8 note without cabin drone. Warranty & Origin Made in Australia Engineered for long-term performance and reliability

TORQIT Performance Exhaust Headers – DODGE RAM DT 5.7L (2019+) Part Number: TPH02 Upgrade your DODGE RAM DT with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT RAM headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with a TORQIT Performance Exhaust System to eliminate restriction and achieve optimal power, torque, and sound. Installation Professional installation recommended Bolt-on fitment compatible with factory components Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: DODGE RAM DT 5.7L Year: 2019+

TORQIT Performance Exhaust Headers – NISSAN PATROL Y62 5.6L (2013+) Part Number: TPH01 Upgrade your NISSAN PATROL Y62 with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Y62 headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with TORQIT Y62 Patrol Performance Exhaust and High Flow Catalytic Converters to eliminate restriction and achieve optimal power, torque, and sound. Installation Estimated installation time: 5–6 hours Professional installation recommended (requires hoist and mechanical expertise) Bolt-on fitment compatible with factory components Important Notes Installing headers on the Y62 Patrol removes primary catalytic converters and may trigger O2 sensor warning lights. An ECU tune such as TORQIT ModuleMap is recommended to prevent this. Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: NISSAN PATROL Y62 5.6L Series: Series 1–5 (2013+) Weight: 11 kg

3" Turbo Back Twin Performance Exhaust for Next-Gen V6 Ford Ranger Raptor (2023 Onwards) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. Upgrade your 2023+ Ford Ranger Raptor V6 with Torqit's premium 3" Turbo Back Twin Performance Exhaust System. Designed to deliver a deeper, tougher exhaust note while maintaining factory bi-modal functionality, this system is engineered using premium 304-grade stainless steel for exceptional durability, corrosion resistance, and long-lasting performance both on and off-road. Built with thick-walled stainless steel, precision mandrel bends, an X-pipe, and high-flow Euro 6 catalytic converters, this exhaust maximises airflow while producing a refined performance sound throughout the entire rev range. Designed for straightforward DIY installation, it bolts directly into place without requiring a hoist. Features & Benefits Designed for Next-Gen Ford Ranger Raptor V6 (2023 onwards) 3" Turbo Back Twin Performance Exhaust System Retains factory bi-modal exhaust functions Premium 304-grade stainless steel construction for maximum strength and corrosion resistance Brushed stainless steel tubing up to 2mm thick X-pipe design improves exhaust flow and enhances exhaust note High-flow Euro 6 200 CPSI catalytic converters Fully mandrel bent piping for optimum exhaust flow and precise fitment Internal and external TIG welded flanges for superior strength and leak prevention Heavy-duty brackets with 10mm laser-cut flanges Single centre muffler delivers a deeper exhaust note throughout the rev range Choice of Black or Brushed Stainless Steel exhaust tips Maintains stock ground clearance Compatible with spare tyres up to 35" DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated for the vehicle) Installation The Torqit Next-Gen Ranger Raptor Exhaust is designed as a bolt-together DIY system for straightforward installation. Approximate installation time: 1.5 hours No hoist required Complete fitment kit included Installation instructions included Premium Stainless Steel Construction Your exhaust system is exposed to constant heat, vibration, and harsh off-road conditions. Torqit uses brushed stainless steel tubing up to 2mm thick to maintain structural integrity after bending while providing outstanding durability and resistance to cracking. The thicker material also produces a deeper exhaust note with reduced cabin drone compared to thinner exhaust systems. 304 Grade Stainless Steel Manufactured from premium 304-grade stainless steel, this exhaust offers excellent strength, corrosion resistance, and easy maintenance. Its higher chromium and nickel content provides superior durability in demanding environments, making it ideal for vehicles regularly exposed to water crossings, coastal conditions, and extreme temperatures. Unlike lower-grade stainless steels that develop surface rust over time, 304-grade stainless steel only develops light browning from heat exposure and can be polished back to its original finish. Precision TIG Welding Every system features internal and external TIG welded flanges to maximise strength, minimise structural fatigue, prevent cracking, and eliminate exhaust gas leaks. This premium welding process produces clean, accurate welds that enhance both durability and long-term reliability. Mandrel Bent Performance Each exhaust is fully mandrel bent to maintain consistent internal pipe diameter throughout every bend. This ensures smoother exhaust flow, reduced back pressure, consistent pipe strength, and accurate vehicle fitment. Key Features Factory bi-modal exhaust functionality 3" Turbo Back Twin exhaust system Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system X-pipe for improved airflow and sound High-flow Euro 6 200 CPSI catalytic converters Single centre muffler Choice of Black or Brushed Stainless Steel tailpipe finishes Internal and external welded flanges 10mm laser-cut flanges Heavy-duty mounting brackets Maintains stock ground clearance Fits spare tyres up to 35" DIY bolt-together installation Approximate 1.5-hour installation Complete fitment kit included Up to 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated) Manufacturing Information This is a manufactured item. While key components may be kept in stock, final assembly and coating are completed to order and may require additional time before dispatch.

3" TO 4" PERFORMANCE EXHAUST WITH 650MM EXTENSION FOR TOYOTA LANDCRUISER 200 SERIES (WITH DPF) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or driving off-road. Offer available while stocks last. Enhance the performance and efficiency of your Toyota LandCruiser 200 Series with TORQIT's premium 3" to 4" Performance Exhaust featuring a 650mm extension section. Specifically designed for vehicles equipped with a Diesel Particulate Filter (DPF), this premium exhaust system improves airflow, lowers exhaust gas temperatures (EGTs), and delivers a deeper exhaust note while maintaining excellent drivability. Manufactured from premium stainless steel, this heavy-duty exhaust system is built to withstand Australia's demanding touring, towing and off-road conditions. The larger diameter design allows exhaust gases to flow more efficiently, helping your engine perform at its best whether towing a caravan, tackling challenging terrain or covering long distances. KEY FEATURES 3" to 4" performance exhaust system 650mm extension section included Designed for Toyota LandCruiser 200 Series models fitted with a DPF Improves exhaust flow and engine efficiency Helps reduce exhaust gas temperatures (EGTs) Premium stainless steel construction Corrosion-resistant finish for long-term durability Heavy-duty design for towing, touring and off-road use Bolt-on installation for straightforward fitment Engineered for reliable long-term performance PERFORMANCE BENEFITS Improved exhaust flow Enhanced engine responsiveness Reduced exhaust gas temperatures (EGTs) Improved towing performance Deep, refined exhaust note Built for demanding Australian conditions VEHICLE COMPATIBILITY Toyota LandCruiser 200 Series Vehicles equipped with a Diesel Particulate Filter (DPF) INSTALLATION This exhaust system features a bolt-on design for simplified installation. Professional fitting is recommended to ensure correct alignment and optimum performance. IMPORTANT INFORMATION Please confirm vehicle compatibility before ordering, particularly if your vehicle has aftermarket accessories or modifications. Contact our team if you require assistance selecting the correct exhaust system for your LandCruiser.

TORQIT DPF Back 3" Twin to 4" Single Performance Exhaust for Toyota LandCruiser 200 Series with ARB Frontier Tank Upgrade your Toyota LandCruiser 200 Series with the TORQIT HS8138XMSS-4 DPF Back Performance Exhaust, specifically engineered for 4.5L diesel models (10/2015–2022) fitted with an ARB Frontier Long Range Fuel Tank. Designed and manufactured in Australia, this premium exhaust system improves exhaust flow, enhances towing performance and delivers a deep, refined exhaust note while remaining compatible with factory Diesel Particulate Filter (DPF) systems. Featuring a 3" twin into 4" single DPF-back configuration, this performance exhaust is manufactured from premium 304-grade stainless steel with fully mandrel-bent tubing for unrestricted exhaust flow. The system comes standard with a high-flow resonator, providing a balanced exhaust note with improved sound compared to the factory system while maintaining everyday driving comfort. Engineered for Performance TORQIT Performance Exhausts are designed to maximise exhaust flow, reduce back pressure and improve overall engine efficiency. By allowing the engine to breathe more effectively, the system supports improved throttle response, towing performance and lower Exhaust Gas Temperatures (EGTs), making it ideal for touring, towing and demanding off-road conditions. Specifically designed to suit vehicles fitted with an ARB Frontier Tank, this exhaust provides reliable fitment without compromising durability or performance. Premium Construction Premium 304-grade stainless steel construction Fully mandrel bent tubing for unrestricted exhaust flow Heavy-duty laser-cut stainless steel flanges Internal and external TIG welded joins Heavy-duty mounting brackets High-flow resonator for improved sound quality Designed specifically for DPF-equipped vehicles Built to suit ARB Frontier Long Range Fuel Tank installations Performance Benefits Improved exhaust flow and engine efficiency Reduced exhaust gas temperatures (EGTs) Enhanced towing capability Improved throttle response Deep, refined exhaust note Excellent corrosion resistance Designed for Australian touring and off-road conditions Bolt-Together Installation The HS8138XMSS-4 is supplied as a complete bolt-together exhaust system for straightforward installation. It can be fitted by experienced DIY installers using basic workshop tools or professionally installed by an authorised TORQIT dealer. Installation time typically ranges from 1–3 hours depending on vehicle setup and workshop equipment. Vehicle Compatibility Toyota LandCruiser 200 Series 4.5L V8 Turbo Diesel October 2015 – 2022 DPF-equipped models Suits vehicles fitted with an ARB Frontier Long Range Fuel Tank Key Features DPF Back 3" Twin to 4" Single Performance Exhaust High-flow resonator included Premium 304-grade stainless steel Mandrel bent construction Laser-cut TIG welded flanges Heavy-duty brackets Bolt-together installation Australian designed and manufactured Built for towing, touring and off-road performance Important Information This exhaust system is specifically designed to suit Toyota LandCruiser 200 Series vehicles fitted with an ARB Frontier Long Range Fuel Tank. Please confirm vehicle compatibility before ordering, particularly if your vehicle has additional aftermarket accessories or modifications. This is a manufactured product. While key components may be held in stock, final assembly is completed to order and may require additional processing time before dispatch. SKU: HS8138XMSS-4 Material: Premium 304 Grade Stainless Steel Configuration: DPF Back – Twin 3" to Single 4" Finish: Brushed Stainless Steel Weight: 32kg