FATZ FABRICATION 9" Dry Air Filter Element – Premium Off-Road...
$120.00
Fatz 9″ long Element, 4″ outlet Dry Filters
Our Fatz Build 9 Inch Dry element Air filters are quality made filters, built with Off-road driving in mind. Our paper element filters have been independently tested as per ISO 5011 standards and rated with a filtration efficiency of 99.9%. Our Filters have been supplied to our customer base for over a decade and have undergone hundreds of thousands of km of vigorous testing in vehicles from daily driven vehicles to off-road racing applications, such as Winch truck Challenges and Off-Road Rally, all with great results. Our 9″ element filters can be supplied for general applications as well as replacements for your Fatz built Airbox. Maximum flow capacity on our Dry element 9″ filters are 1080CFM as tested. The Pod design offers many advantages over OEM panel filters. With a very secure sealing design to the Airbox outlet, the filter will not cause a leak when under heavy suction in a clogged state. If the filter element is a quality material, there is no way for dust to bypass the filter under normal operating conditions. Add an additional filter to your Airbox order to have a convenient swap out option when on the road. Purchase our Fatz Build 9 Inch Air Filters and experience the difference.
(*Air Flow data should be used as comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
FATZ FABRICATION Gu Patrol Airbox. Dry Element Air Filter. No...
$1,070.00
GU Patrol 4″ High Flow Airbox
Our GU Patrol 4″ High flow Airbox is a versatile unit with great compatibility in many common set ups. With GU Patrol 4” inlet and outlet, supplied with our Fatz Built filter in your choice of either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, template for enlarging the hole through the inner guard and fitting instructions supplied with the box. The box incorporates a water trap and duck valve drain, to allow water to drain away from the filter when ingested through the snorkel. The box is compatible with dual batteries with no modification to the box or tray. Simply select your plumbing kit (sold separately) to allow fitment with many common Engine combinations such as TD42, ZD30, RD28, LS1-3 etc. Not compatible with TB48 or TB45 without modifications. With an increase in flow from 410CFM with the factory box to Over 850CFM* with our High Flow Airbox, the improvements will be obvious. Supplied in all cases with filter, template for guard hole enlargement, clear lid, fasteners and instructions to fit out.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 4" Inlet For Fatz Or...
$1,070.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 4" Inlet For Fatz Or...
$1,070.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 3.25" Inlet For Factory, V-Spec...
$1,070.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 3.25" Inlet For Factory, V-Spec...
$1,070.00
3.25″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 3.25″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION 200 Series Airbox. Oiled Air Filter. Includes Plumbing...
$1,700.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION 200 Series Airbox. Oiled Air Filter. Includes Plumbing...
$1,790.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION 200 Series Airbox. Dry Element Air Filter. Includes...
$1,790.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION N80 Hilux Series Airbox. Oiled Air Filter. Includes...
$1,700.00
Fatz High Flow N80 Hilux Airbox
The Fatz built N80 Airbox incorporate our CNC machined MAF housing to retain factory air flow readings, a filter of your choice (8 layer oiled gauze or dry element paper in a 9 inch POD configuration), clear acrylic lid for a great look and easy checking of filter soiling. The box incorporates a duck valve drain to allow water to drain away from the filter, when ingested through the snorkel for peace of mind motoring. Mounting the airbox is taken care of by the factory mounting rubbers and fasteners. Plumbing from the air box outlet to the turbo inlet is comprised of silicone couplings and powder coated alloy pipe supplied as part of the kit.
Supplied in all cases with filter, clear lid, plumbing from airbox to turbo inlet pipe in silicone and alloy pipe, and instructions to install.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION N80 Hilux Airbox. Dry Element Air Filter. Includes...
$1,700.00
Fatz High Flow N80 Hilux Airbox
The Fatz built N80 Airbox incorporate our CNC machined MAF housing to retain factory air flow readings, a filter of your choice (8 layer oiled gauze or dry element paper in a 9 inch POD configuration), clear acrylic lid for a great look and easy checking of filter soiling. The box incorporates a duck valve drain to allow water to drain away from the filter, when ingested through the snorkel for peace of mind motoring. Mounting the airbox is taken care of by the factory mounting rubbers and fasteners. Plumbing from the air box outlet to the turbo inlet is comprised of silicone couplings and powder coated alloy pipe supplied as part of the kit.
Supplied in all cases with filter, clear lid, plumbing from airbox to turbo inlet pipe in silicone and alloy pipe, and instructions to install.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Hdj70 Series Airbox. Oiled Air Filter. Incorperates Washer...
$1,220.00
HDJ79/HZJ75 Series 4″ Airbox
Our Toyota HDJ75 / HDJ79 series Airbox is a high flow alternative for the Factory airbox. Built in 3mm aluminum this airbox has 4” inlet and outlets, utilizes our 9” pod filter in either an 8 Layer gauze or paper element, Picks up on factory mounting locations utilizing rubber mountings, has a clear Perspex lid for easy checking of filter soiling and has a water drain tank and duck style drain in the base of the box to allow water to drain after entering the snorkel. The box also incorporates a windscreen washer tank which removes the factory unit for easier installation and clean aesthetic. This box can be supplied with a plumbing kit for common applications (sold separately., refer drop down options) for an all inclusive install solution. Purchase Fatz Fabrication’s Toyota HDJ75 / HDJ79 series 4″ Airbox and experience the difference.
Plumbing Kits Designed for 1HD-Fte engines. 1HZ Turbo Charged configurations will differ. Please contact us for further information.
Supplied in all cases with filter, clear lid, fasteners and instructions to fit out.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Hdj70 Series Airbox. Dry Air Filter. Incorperates Washer...
$1,220.00
HDJ79/HZJ75 Series 4″ Airbox
Our Toyota HDJ75 / HDJ79 series Airbox is a high flow alternative for the Factory airbox. Built in 3mm aluminum this airbox has 4” inlet and outlets, utilizes our 9” pod filter in either an 8 Layer gauze or paper element, Picks up on factory mounting locations utilizing rubber mountings, has a clear Perspex lid for easy checking of filter soiling and has a water drain tank and duck style drain in the base of the box to allow water to drain after entering the snorkel. The box also incorporates a windscreen washer tank which removes the factory unit for easier installation and clean aesthetic. This box can be supplied with a plumbing kit for common applications (sold separately., refer drop down options) for an all inclusive install solution. Purchase Fatz Fabrication’s Toyota HDJ75 / HDJ79 series 4″ Airbox and experience the difference.
Plumbing Kits Designed for 1HD-Fte engines. 1HZ Turbo Charged configurations will differ. Please contact us for further information.
Supplied in all cases with filter, clear lid, fasteners and instructions to fit out.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Patrol Airbox. Oiled Air Filter. No Plumbing....
$1,070.00
GU Patrol 4″ High Flow Airbox
Our GU Patrol 4″ High flow Airbox is a versatile unit with great compatibility in many common set ups. With GU Patrol 4” inlet and outlet, supplied with our Fatz Built filter in your choice of either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, template for enlarging the hole through the inner guard and fitting instructions supplied with the box. The box incorporates a water trap and duck valve drain, to allow water to drain away from the filter when ingested through the snorkel. The box is compatible with dual batteries with no modification to the box or tray. Simply select your plumbing kit (sold separately) to allow fitment with many common Engine combinations such as TD42, ZD30, RD28, LS1-3 etc. Not compatible with TB48 or TB45 without modifications. With an increase in flow from 410CFM with the factory box to Over 850CFM* with our High Flow Airbox, the improvements will be obvious. Supplied in all cases with filter, template for guard hole enlargement, clear lid, fasteners and instructions to fit out.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Air Filter. No Plumbing...
$1,390.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. No...
$1,390.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
