This 1762mm/69.4"long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your 2020-Current Land Rover New Defender 90. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. Openings on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a limited lifetime warranty.* Note: This kits is not compatible with OEM ladder or storage box. The OEM tracks need to be removed when installing these Foot Rails. This Rack Kit is not suited for the New Defender V8 models. Features KRLD039T - Land Rover New Defender 90 (2020-Current) Slimline II Consisting of: 1x FALD010 - Land Rover Defender 90 (2020-Current) Foot Rails 1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 37.28kg (82.19lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 255mm (10") Shipping Weight: Weight: 38kg (84lbs)

This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Land Rover New Defender contains 1 Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation. This Rack Kit has a side opening to allow fitment of the Pro Stainless Steel Prep Table Kit. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This Rack Kit is not suited for the New Defender V8 models and models with a folding fabric roof. Features KRLD037T - Land Rover New Defender(2020-Current) 110 w/OEM Tracks Slimline II Roof Rack Kit - by Front Runner Consisting of: 3x FASS017 - Foot Set / 75mm-85mm3x RRAC930 - Land Rover New Defender (L663) OEM Track Mount Kit1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 27.51kg (60.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 150mm (6")   Shipping Weight: Weight: 27.6kg (61lbs)

Compatible with the Land Rover New Defender OEM tracks Includes four (4) mounting feet and two (2) 1255mm Load Bars that fit into the factory/OEM vehicle tracks Load Bars are mounted via mounting feet that bolt directly onto the tracks Uses the same strong, corrosion-free aluminum slats found in Front Runner racks Sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats Made from steel and durable, weather-resistant black powder coated aluminum Includes all hardware, components and installation guide needed to fit Load Bars on a vehicle Features KRLD038 - Land Rover New Defender(2020-Current) 90/110 Load Bar Kit Consisting of: 2x FASS017 - Foot Set / 75mm-85mm 1x LBSK014 - Roof Load Bar Pair 1255mm(W) 1x RRAC044 - Slat to Load Bar Conversion end Cap Kit 2x RRAC930 - Land Rover New Defender (L663) OEM Track Mount Kit Material used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 6.1kg (13.45lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 150mm (6") Length: 1385mm (55") Height: 145mm (6") Shipping Weight: Weight: 5.89kg (13lbs)

A spare wheel carrier for the Land Rover Defender 90 and 110 Ute. Allows fitment of an additional spare wheel to the rear of the vehicle. Secures to the chassis and the load bed body with supplied brackets and hardware. The spare wheel can then swing open to allow the tail gate to be opened.

A spare wheel carrier for the Land Rover Defender 130/DC Ute. Allows fitment of an additional spare wheel to the rear of the vehicle. Secures to the chassis and the load bed body with supplied brackets and hardware. The spare wheel can then swing open to allow the tail gate to be opened. Load capacity 60kg (132.3lbs)

​​The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium and creates a convinient storage compartment accessible through the side of your vehicle. The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium. This creates extra convenient storage space for your Land Rover Defender TDI/TD5. Front Runner Gullwing Box Shelves can be used to create divisions in the box for storage. *Front Runner Gullwing Box Shelves, sold seperately. Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom PanelMaterials used:Black powder-coated mild steelProduct Dimensions:L 255mm (10") x W 1000mm (39.4") x H 654mm (25.8")Weight:13.1kg (28.9lbs)

The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium. This creates extra convenient storage space for your Land Rover Defender Puma. Front Runner Gullwing Box Shelves can be used to create divisions in the box for storage. *Front Runner Gullwing Box Shelves, sold seperately. Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9") W x 310mm (12.2") L x 654mm (25.8") H (Box)860mm (33.9") W x 310mm (12.2") L x 746mm (29.4") H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Shelf made from plywood and powder-coated mild steel.Up to 6 of these shelves can be used in a gullwing box.Shelf has slots cut in to allow for various fixing straps or elastic straps to be used to secure plates or other items. Consists of:1x Mild steel & wood Shelf1x Installation KitMaterial used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steelProduct dimensions:264mm (10.4") L x 856mm (33.7") W x 36mm (1.4") HWeight:3.8kg (8.4lbs)

The Front Runner Glass Gullwing Window replaces the rear window of a Defender and allows you to tilt​ up the window, creating 100% easy access to the contents of your load area.     The locking Front Runner Gullwing Window can be fitted together with the Front Runner Gullwing Box (GWDL004) to create extra gear storage possibilities.  The 6mm toughened glass with tinted laminate​ allows you to see what is stored, keeps your valuables secure, and adds a stylish finish to your vehicle's exterior.​​Note: The glass and aluminium panels for the Land Rover Defender are not interchangeable. Consists of:1x Glass gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:6mm Toughened glass with tinted laminateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1") x W 50mm (2") x H 490mm (19.3")Door Panel: L 1044mm (41.1") x H 414mm (16.3")Weight:15kg (33.1lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8

Transport and store you Gas/Propane bottle onto your Land Rover 90 & 110 with this high strength steel, gutter mount Single Gas Bottle Bracket. The bracket secures a single gas / propane bottle to the Land Rover Defender 90 & 110. For installation, drilling is required. This holder features a black powder coated high strength steel bracket and adjustable clamp to accommodate gas bottles with a diameter of 210mm (8.3") up to 290mm (11.4"). The bracket is lockable with the Rack Accessory Lock / Small. Supplied with installation hardware. Consists of:1 x Gas Bottle Frame1 x Gas Bottle Base Plate1 x Adjustable Gas Bottle ClampInstallation HardwareFitting Instruction Materials used:Black powder coated high strength steel Assembled Product Dimensions:341mm (13.4") L x 294mm (11.5") W x 621mm (24.4") H Weight:5.4kg (11.9lbs)Suitability:Holds gas bottles ranging from 210mm (8.3") to 290mm(") in diameter

A 1.6mm thick aluminium tread plate that fits on top of the fender of your vehicle for added protection. Made from black powder coated aluminium. Protects the fender against dents and scratching. Suitable for all Defender models. BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front RunnerMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2.2kg (4.85lbs)Shipping Dimensions:Width: 380mm (15")Length: 1130mm (44")Height: 35mm (1")Shipping Weight:Weight: 2.2kg (5lbs)

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Landrover - Defender 90 1983 - 2016, SHORT WHEEL BASE

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles. When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - suspension bottoming out - rough ride - excessive sway & body roll - unpredictable braking characteristics - poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-35psi - Tough moulded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Landrover - Defender 110 1983 - 2016

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Landrover - Defender 130 1983 - 2016, 4 COIL REAR