Americas Garage Mega Cab, Short Bed, Long Range Fuel Tank,...
$2,950.00
Titan Fuel Tanks is once again revolutionizing the industry with the release of the new Gen 7 XXL Replacement Fuel Tanks. Our tanks are the most advanced and capable XXL fuel tanks ever produced. Constructed from our renowned High-Density Cross-Linked Polyethylene (XLHDPE), they offer unmatched durability and a lifetime warranty, surpassing any other fuel tank on the market.
The Gen 7 tanks boast three innovative new features to maximize versatility:
A fast fill vent kit for hassle free fueling at high-flow truck stop pumps, a universal pickup tube compatible with high-pressure fuel systems, and a transfer pump kit, allowing you to conveniently fuel other vehicles directly from your XXL replacement tank. These kits are optional and sold separately. They can be found at the bottom of this page.
The Titan 72L (50 Gallon) Extra Capacity Mid-Ship Replacement Fuel Tank, designed specifically for 2025 Ram 2500 and 3500 pickups with Mega Cabs, Short Beds, and Cummins engines. With this innovative upgrade, you're not just investing in a larger fuel tank - you're investing in unparalleled freedom and convenience on the road.
The tank comes complete with a black-coated, galvanized steel mounting strap and front support system. Plus, with its exclusive low fuel trap design all 50 gallons are usable capacity. We could advertise a larger capacity, but we chose to only market usable capacity to set honest and reasonable expectations for our customers. The Titan XXL tank also features minimal hang down below the bottom of the stock tank (approximately only 2.5" lower).
Installation is a breeze - no fabrication or cutting required. This tank is a direct fit, bolt-in application, making it the perfect upgrade for your Ram 2500 or 3500 pickup.
Titan Fuel Tanks offers unmatched durability with a lifetime warranty
The Gen 7 tanks feature a fast fill vent kit for hassle free fueling
Designed specifically for 2025 Ram 2500 and 3500 pickups
Installation is a breeze with a direct fit bolt-in application
Exclusive low fuel trap design ensures all 72 litres (50 gallons) are usable
Invest in unparalleled freedom and convenience on the road
InstallationInstallation
Estimated time: 4 hours
Difficulty: Medium
Important Notes
The TITAN tank is 19 gallons larger at 50 gallons. The stock tank is only 31 gallons.
Will not interfere with powered steps, air bag systems and most other accessories.
Our mid-ship, direct replacement fuel tanks are designed to use your trucks’ stock/OE sending unit. However, our tanks are compatible with Fleece, AirDog, FASS, etc.
Not for use on the trucks that were ordered from the factory with the optional larger 48/50 gallon RAM tank.
Americas Garage Bonnet Protector/Hood Shield, Chrome suits Ram 2500/3500 (13-18)...
$50.00
There’s nothing worse than hearing the familiar clink of a rock chipping your windshield or the audible splatter of bugs across the glass. If only there were ways to prevent unsightly chips and bug guts. Luckily, RealTruck has the solution: the AVS® Chrome Bug Deflector! This premium bug deflector features a durable construction, snug vehicle-specific fitment, and a lustrous chrome finish, making it the ideal addition to any truck, Jeep, or SUV.
The AVS® Chrome Bug Deflector features heavy-duty acrylic construction that resists impacts and abrasions for long-lasting service life. Thanks to its innovative shape and high-profile design, insects and debris that come into contact with the deflector glide up and over the cab rather than into the hood, windshield, or roof!
The AVS® Chrome Bug Deflector features lustrous chrome plating that perfectly complements chrome accents like grilles, running boards, bumpers, and wheels! AVS® uses the same plating technologies as OEM manufacturers, ensuring years of peel and pit-free performance.
This product comes in an off-the-hood design, creating clearance between the hood and deflector to fit a wash mitt or microfiber towel to clean dirt and debris. This design also prevents the scuffs and paint wear of lesser-quality bug deflectors that rest directly on the hood.
The AVS® Chrome Bug Deflector features a simple no-drill installation utilizing vehicle-specific mounting hardware, 3M double-sided adhesive, or a combination of the two. AVS® proudly manufactures the Chrome Bug Deflector in the USA with global materials and backs the product with a limited lifetime warranty.
Similar/Previous: ,AVS680120
Impact-resistant acrylic construction
Custom-molded for a tight fit
High-profile wrap-around design
Protects against bugs and debris
OEM-quality chrome plating
Easy no-drill installation
Specifications
Finish: Chrome
Warranty: Limited Lifetime
Material: Impact Resistant Acrylic
Country of Origin: USA
Features & Benefits
Impact-resistant acrylic construction
Custom-molded for a tight, vehicle-specific fitment
High-profile wrap-around design
Protects against bugs, dirt, and road debris
OEM-quality chrome plating
UV and scratch-resistant
Off-the-hood design for easy cleaning
Car-wash safe
Attaches with 3M double-sided adhesive tape and/or no-drill fasteners
Limited lifetime warranty
Proudly assembled in Georgia
InstallationInstallation
Install Guide 1
Estimated time: 0.5 hours
Difficulty: Easy
Install Tools
Car Wash Supplies
Clean Towel
Phillips screwdrive
Americas Garage 2" Smooth Pocket/Rivet Style Fender Flares, Black, Front...
$1,179.00
With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish they're UV protected so they won't chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, it's in the pocket. Pocket Style Fender Flares from Bushwacker.
Similar/Previous: ,HUS2805930
Specifications
Color: Black
Material: ABS/Thermoplastic
Position: Front and Rear
Americas Garage 2" Extend-A-Fender Smooth Fender Flares, Black, Front &...
$1,179.00
Enhance your Ram 2500/3500 (2019-2025) with the Bushwacker 2" Extend-A-Fender Smooth Fender Flares. Designed for both front and rear applications, these fender flares provide a sleek, stylish look while offering superior protection against mud, debris, and road hazards. Crafted from durable materials, they ensure a perfect fit and long-lasting performance. Elevate your truck's appearance and functionality with these premium fender flares, engineered to withstand the toughest conditions. Upgrade your ride today and experience the perfect blend of style and protection.
Similar/Previous: ,HUS2805931
Enhance the look of your Ram 2500 or 3500 with sleek fender flares
Provide superior protection against mud and debris
Crafted from durable materials for long-lasting performance
Designed for both front and rear applications
Engineered to withstand tough conditions
Upgrade your ride with a perfect blend of style and functionality
Specifications
Tyre coverage: +5 Offset
InstallationInstallation
Estimated time: 2 hours
Difficulty: Easy
Important Notes
All of the Husky Flares come in a black plastic finish.
There is not a clear coat on it and it is recommended that all flares are painted before being installed.
If you are painting it black, you can just put a clear coat on it.
Failure to get a clear coat or paint on the flares will result in them fading and potentially cracking.
Americas Garage Hard Folding Tonneau Cover, 6'4 Tub, No RamBox...
$2,199.00
The BAKFlip G2 Hard Folding Tonneau Cover is built for Ram owners who need secure cargo protection without giving up the practicality of their truck bed. Designed to suit the Ram 2500 and Ram 3500 with the 6'4" tub (without RamBox), the G2 combines a low-profile appearance with heavy-duty aluminium construction that's ready for everyday work and weekend adventures.
Its hard folding design allows you to open one section, two sections or fold the cover completely against the cab when you need full access to the tray. The concealed latch system keeps your cargo secure when the tailgate is locked, while the weather-resistant seals help keep dust and rain where they belong... outside the tub.
Supporting up to 136kg of evenly distributed weight, the BAKFlip G2 is built to handle real-world use. Whether you're carrying tools, camping gear or towing equipment, it delivers the security of a hard cover without compromising accessibility.
Installation is completely clamp-on with no drilling required, making it a straightforward upgrade that looks right at home on your Ram.
As an authorised Australian BAK dealer, America's Garage supplies genuine BAK Industries tonneau covers with local stock, expert advice and nationwide support.
Similar/Previous: ,BAK226203
FRONT RUNNER Ram 1500/2500/3500 6' 4In (2009-Current) Slimline Ii Top-Mount...
$2,315.70
$2,573.00
This kit creates a full-size rack that sits above your RAM 1500/2500/3500 6' 4" truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks that install on top of the side channel of the load bed, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR018T - Ram 1500/2500/3500 6' 4" (2009-Current) Slimline II Top-Mount Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS027 - Leg Spacer 6mm (Pair)3x LASS038 - Pickup Roll Top/Top Mount Leg / Medium (Pair)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)1x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.4808kg (84.84lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 39kg (86lbs)
FRONT RUNNER Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline Ii Roof...
$1,615.50
$1,795.00
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Crew Cab 2009+. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 openings to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note:
Both traditional and panoramic sunroofs may be operated in 'vent mode' and fully retracted, provided that you do NOT mount a table underneath. If you do mount a table underneath, only traditional sunroofs may be fully opened because they retract underneath the roof. Traditional sunroofs may NOT be operated in 'vent mode' because the table will interfere.
Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current)
Models with panoramic sunroofs include: Ram 1500 (2019-Current)
Features
KRDR010T - Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit by Front Runner
Consisting of:
1x FADR001 - Ram 1500 Crew Cab (2009-Current) Foot Rails1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.68kg (65.43lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 31kg (68lbs)
FRONT RUNNER Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline Ii Roof...
$1,624.50
$1,805.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Crew Cab. Drilling into the vehicle's roof is required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note:
Traditional sunroofs may be fully opened because they retract underneath the roof. They may NOT be opened in vent mode, otherwise the Low Profile rack will interfere.
If you wish to open a traditional sunroof in vent mode you may install Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit, provided that you do NOT mount a table underneath.
Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current)
Panoramic sunroofs may NOT be opened in any mode because they retract over the roof.
If you wish to open a panoramic sunroof in any mode you may install Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit, provided that you do NOT mount a table underneath.
Models with panoramic sunroofs include: Ram 1500 (2019-Current)
Features
KRDR011T - Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit / Low Profile by Front Runner
Consisting of:
1x FADR003 - Ram 1500 Crew Cab(2009-Curr)Foot Rails/ Low
1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.7kg (65.48lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.4kg (62lbs)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr (2003-Current) Double Load Bar...
$573.30
$637.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR025 - Ram 1500/2500/3500 ReTrax XR (2003-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK018 - Roof Load Bar Pair 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6.8kg (14.99lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 170mm (7")
Length: 1690mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 8kg (18lbs)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 5'7In (2009-Current) Slimline Ii...
$1,959.30
$2,177.00
This kit creates a full-size rack that sits above your Ram 1500/2500/3500s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR019T - Ram 1500/2500/3500 ReTrax XR 5'7" (2009-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.68kg (72.05lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 34kg (75lb)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 5'7In (2009-Current) Triple Load...
$865.80
$962.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR022 - Ram 1500/2500/3500 ReTrax XR (2009-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK019 - Roof Load Bar Set 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 9kg (19.84lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1690mm (67")
Height: 150mm (6")
Shipping Weight:
Weight: 10kg (22lbs)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 6'4In (2003-Current) Slimline Ii...
$2,216.70
$2,463.00
This kit creates a full-size rack that sits above your Ram 1500/2500/3500s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR020T - Ram 1500/2500/3500 ReTrax XR 6'4" (2003-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS027 - Leg Spacer 6mm (Pair)
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.79kg (78.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 37kg (81lbs)
FRONT RUNNER Ram Pro Master 3500 (136 Wb/High Roof) (2014-Current)...
$2,173.50
$2,415.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1345mm (53") W x 63mm (2.5") H Weight:4.38 kg (9.7 lbs)
FRONT RUNNER Ram Pro Master 3500 (159 Wb/Ext High Roof)...
$2,837.70
$3,153.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1358mm (53.5") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:4.5 kg (9.9 lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
