is here! Shop now, pay later in 4 easy installments
ⓘ
6-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V The incredibly flexible XDM600/6 packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is...
6-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V
The incredibly flexible XDM600/6 packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM600/6 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
With the XDM600/6, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.
The XDM600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
| @ 4 Ω | 75 W RMS x 6 |
| @ 2 Ω | 100 W RMS x 6 |
| Bridged @ 4Ω | 200 W RMS x 3 |
| @ 4 Ω | 60 W RMS x 6 |
| @ 2 Ω | 90 W RMS x 6 |
| Bridged @ 4Ω | 180 W RMS x 3 |
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >150 / 50 Hz |
| Damping Factor @ 2 Ω | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes | 2 or 4 or All Channels |
| Channel Input Mode Switch | Yes (2/4/6 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 10.23 in / 260 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 5.8 lb / 2.63 kg |
Glen and the guys did an amazing job installing a towbar and wiring kit on my vehicle. Well priced and they turned it around in a few hours on pretty short notice. Highly recommend.
Big shout out to the boys at TJM Northern Beaches. A great job for my suspension upgrade. Knowledgeable, greate communication, workmanship and efficiency. Very happy with the result.
Great team effort from Sales, Installation, and aftersales in looking after my GVM upgrade on my LC 300 GRS. Many thanks team
For all 4x4 advice, products and service, look no further than TJM Northern Beaches in Brookvale. Jason has built a fantastic team of professionals who have both in-depth technical knowledge and experience and demonstrate some of the best customer service skills I’ve seen. They beat their competitors in this area hands down. Jason was fantastic with helping me design and specify my Y62 Patrol build earlier this year and was very honest about what they could do / supply and things that I would be better sourcing from other suppliers. Throughout the build, he provided solutions, not problems particularly regarding a pre rego GVM upgrade. He was great in communicating progress and working with Nissan to ensure all the work was completed prior to registration. A big shout out also to Andy and Ed in the workshop who were very patient and helpful in providing me with an operational handover once it was complete. They have also provided great after sales service. I’ll definitely be going back to TJM Brookvale for all my 4x4 needs and highly recommend them – no need to look further. Well done team!
Great service and workmanship. Jason and his team looked after me very well. answered questions and emails promptly.I would recommend these guys!
The team just completed a heap of 12v work on my new car after doing work on my previous one. The workmanship as usual was first class and I can't recommend them highly enough. Given my Ineos is a brand new car to market they took the time and care to ensure it was completed professionally and exactly to my requirements.
The best 4WD shop in Sydney, cannot recommend more. Jason and Des are absolutely legend. They are very helpful and professional, Giving me the best options and keep everything on track. The boys from the workshop also provide high quality workmanship, and easy communication. They supply large range of high quality brands like Jmacx, RVSS, Enerdrive etc, your true one stop shop. I should build with them from the start, it would be much easier!
Phoned in the morning… with the roof top tent in stock… dropped vehicle off at lunch, and had it back that afternoon. Need I say more!? Thanks gents!
Jase, Glen and Des were a massive help after losing my car in the floods.
My 2022 D’max had a bullbar, winch and lift kit fitted and it looks and feels amazing! The guys at TJM Brookvale made every effort to get the work on my car done the second my car was off the boat and at the dealership and turned it around in a very short time, as they knew it was hurting me having no car, not to mention did it all at a very reasonable price. I can’t overstate how good these guys are. I will definitely be a repeat customer! Grateful to these blokes.
Thanks Glen and your team for an excellent first class service. Very price competitive as well.
The lads helped me out last minute to install my rooftop tent. They had all the necessary tools & equipment and were super friendly and helpful. Thanks guys!!
Got my TJM Outback bull bar, Rock slides & 2” lift with them in Brookvale.
Glen and the team are first class.
$132.00
