This slide out tray offers easy access to a fridge (80L to 90L) and/or other stored gear with a low profile, rigid design. Product Dimensions: 580mm (22.8") W x 920mm (36.2") L x 65mm (2.6") H This slide system makes accessing your fridge or other heavy gear quick and simple while using minimal space. Mountable to any flat surface, including Front Runner drawer systems and pick-up truck beds. Mounting holes are predrilled. High strength bearing drawer slides allows the tray to extend nearly 100% from the anchored base. Unique design keeps the slide rattle free when closed. A swivel latch securely locks the drawer in the closed position. Finished in the same durable weather resistant black powder coating as the Front Runner Slimline II Roof Rack. Can have many other uses, like carrying tools, boxes, or other adventure gear. Mounting hardware included for wood and metal surfaces. Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately.   Consists of:1x Fridge Slide1x L-Bracket latchBolt kitMaterials used:1.8mm (0.07") Black powder-coated steelProduct Dimensions:Overall/Closed Dimensions:920mm (36.2") L x 580mm (22.8") W x 65mm (2.6") H Open Dimesions:1830mm (72") L x 580mm (22.8") W x 65mm (2.6") HInternal Dimesions:880mm (34.6") L x 508mm (20") W x 25mm (1") H Weight:16.7kg (36.8lbs)Maximum load capacity:100kg (220.5lbs)

Suits Nissan Patrol Y62 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1100mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

Suits Volkswagon Amarok 2H, Volkswagen Amarok   Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Simgle Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA E830 GENERIC LEFT STORAGE DRAWER SYSTEM-E830-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 830mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 715mm Intenral drawer width = 525mm  

MSA E1350 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1350-RIGHT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

Suits Toyota HiLux 8th Gen   MSA HILUX 8TH GEN LEFT STORAGE DRAWER SYSTEM-E1350-HILUX8-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim XTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande   MSA PRADO 120 SERIES LEFT STORAGE DRAWER SYSTEM-E930-PRA120-LE-COM SUITS: Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande (models with rear aircon) Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

Suits Volkswagen Amarok 2H with AdBlue   MSA 4X4 AMAROK AD BLUE DOUBLE STORAGE DRAWER SYSTEM -E1350-VWROKAB-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA FORTUNER LEFT STORAGE DRAWER SYSTEM-E930-FORTUN-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim XTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 E700 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E700-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 700mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 590mm Internal drawer width = 525mm  

MSA 4X4 PATROL Y62 DOUBLE STORAGE DRAWER SYSTEM-41007 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height  215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA D-MAX & COLORADO LEFT STORAGE DRAWER SYSTEM-E1350-COLORG-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA 4X4 TRITON MQ DOUBLE STORAGE DRAWER SYSTEM-E1350-TRITMQ-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA NAVARA D23 RIGHT STORAGE DRAWER SYSTEM-41018 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Wing and Fit Kit (includes floor extension) Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM-E930A-LC76-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA TRITON MQ RIGHT STORAGE DRAWER SYSTEM-E1350-TRITMQ-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA 4X4 FORTUNER DOUBLE STORAGE DRAWER SYSTEM-E930-FORTUN-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA NAVARA NP300 RIGHT STORAGE DRAWER SYSTEM-E1350-NAV300-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA E830 GENERIC RIGHT STORAGE DRAWER SYSTEM -E830-RIGHT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 830mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 715mm Internal drawer width = 525mm  

MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Wing and Fit Kit (includes floor extension) Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA E1030 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1030-RIGHT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA AMAROK AD BLUE LEFT STORAGE DRAWER SYSTEM -E1350-VWROKAB-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA HILUX 8TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX8-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA PATROL Y62 LEFT STORAGE DRAWER SYSTEM-41008 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA 4X4 NAVARA NP300 DOUBLE STORAGE DRAWER SYSTEM-E1350-NAV300-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC100-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA E830 GENERIC RIGHT STORAGE DRAWER SYSTEM -E830-RIGHT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA NAVARA D22 RIGHT STORAGE DRAWER SYSTEM-E1350-NAVD22-RI-COM SUITS: Nissan Navara D22 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA AMAROK AD BLUE RIGHT STORAGE DRAWER SYSTEM -E1350-VWROKAB-RI-COM SUITS: Volkswagon Amarok 2H (Ad Blue) Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA BT50 RIGHT STORAGE DRAWER SYSTEM-41003 SUITS: Mazda BT50 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA NAVARA D22 LEFT STORAGE DRAWER SYSTEM-E1350-NAVD22-LE-COM SUITS: Nissan Navara D22 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA 4X4 HILUX 7TH GEN DOUBLE STORAGE DRAWER SYSTEM-E1350-HILUX7-COM SUITS: Toyota HiLux 7th Gen Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA D-MAX LEFT STORAGE DRAWER SYSTEM-41005 SUITS: Isuzu D-MAX RG Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA LANDCRUISER 76 SERIES RIGHT STORAGE DRAWER SYSTEM-E930A-LC76-RIGHT-COM SUITS: Toyota LandCrusier 76 Series Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA D-MAX RIGHT STORAGE DRAWER SYSTEM-41006 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA HILUX 7TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX7-RI-COM SUITS: Toyota HiLux 7th Gen Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA BT50 LEFT STORAGE DRAWER SYSTEM-41002 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA E1350 GENERIC LEFT STORAGE DRAWER SYSTEM-E1350-LEFT-COM VEHICLE DATE: Generic Fit Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1100mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA 1350 RIGHT STORAGE DRAWER MODULE -E1350-RIGHT Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.  

MSA EVEREST LEFT STORAGE DRAWER SYSTEM-E930-EVERES-LEFT-COM SUITS Ford Everest 7 Seat Model, No removable wing/face panels Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA E700 GENERIC RIGHT STORAGE DRAWER SYSTEM-E700-RIGHT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 700mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 590mm Internal drawer width = 525mm  

MSA NAVARA NP300 LEFT STORAGE DRAWER SYSTEM-E1350-NAV300-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA E700 GENERIC LEFT STORAGE DRAWER SYSTEM-E700-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 700mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 590mm Internal drawer width = 525mm  

MSA 4X4 E1350 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E1350-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm